Densities,Apparent Molar Volumes and Viscosities of Concentrated Aqueous NaNO<Subscript>3</Subscript> Solutions at Temperatures from 298 to 607 K and at Pressures up to 30 MPa

Densities of four (2.124, 2.953, 5.015 and 6.271 mol-kg⁻¹) and viscosities of eight (0.265, 0.503, 0.665, 1.412, 2.106, 2.977, 5.015 and 6.271 mol-kg⁻¹) NaNO₃(aq) solutions have been measured with a constant-volume piezometer immersed in a precision liquid thermostat and using capillary flow techniques, respectively. Measurements were made at pressures up to 30 MPa. The temperature range was 298–607 K for the density measurements and 298–576 K for the viscosity measurements. The total uncertainty of density, viscosity, pressure, temperature and composition measurements were estimated to be less than 0.06%, 1.6%, 0.05%, 15 mK and 0.02%, respectively. The temperature, pressure and concentration dependence of density and viscosity of NaNO₃(aq) solutions were studied. The measured values of density and viscosity of NaNO₃(aq) were compared with data and correlations reported in the literature. Apparent molar volumes were derived using the measured density values. The viscosity data have been interpreted in terms of the extended Jones–Dole equation for strong electrolytes. The values of the viscosity A-, B-, D- and F-coefficients of the extended Jones–Dole equation for the relative viscosity (η/η₀) of NaNO₃(aq) solutions were evaluated as a function of temperature. The derived values of the viscosity A- and B-coefficients were compared with the results predicted by Falkenhagen–Dole theory of electrolyte solutions and calculated with the ionic B-coefficient data.     

Validated capillary electrophoretic method for the analysis of ivermectin in plasma after intragastric administration in pigs and horses

A capillary electrophoretic (CE) method has been developed for the determination of ivermectin (CAS 70288-86-7), a new generation drug with antiparasitic activity, in pig and horse plasma. The method was statistically validated for its linearity, accuracy, precision and selectivity. The linear range was from 1 to 30 ng mL(-1) with correlation coefficients greater than 0.999. The limit of detection was 0.3 ng mL(-1), while the quantitative limit was 1 ng mL(-1), using a 0.5 mL sample size. The validated procedure was used to determination of pharmacokinetic parameters of ivermectin after ingestion of 0.1 mg for pigs and 0.2 mg dose per kg body weight for horses, respectively. Studies were performed on a group of eight pigs and six horses. There were no significant differences between pigs and horses in any of the estimated pharmacokinetic parameters.     

Thermodynamic characteristics of sorption of heterocyclic compounds m capillary gas chromatography

Dependences of sorption energies of sulfur-, oxygen-, and nitrogen-containing heterocyclic compounds on the nature of heteroatoms, structure of substituents and their position in the ring were studied. The contributions of heteroatoms, functional and alkyl groups to the energy of dispersive interaction of position isomers with nonpolar stationary phases were determined for imidazoles, piperidines, morpholines, thiomorpholines, dioxalanes, oxathiolanes, dithiolanes, thiophenes, and furans. The nonequivalence of contributions of the same substituents to the sorption energy of each of the heterocyclic compounds, depending on the nature of the heteroatom and position of the substituent, was shown. The obtained values of contributions of heteroatoms and substituents can be used for apriori calculation of retention indices of position isomers of five- and six-membered heterocycles containing one or two heteroatoms in the ring.Translated from lzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 2033–2038, August, 1996.     

Capillary electrophoresis for the speciation of arsenic

Capillary zone electrophoresis (CZE) with on-line UV-detection was used for the determination of arsenite, arsenate, monomethylarsonic acid, dimethylarsinic acid, arsenobetaine and arsenocholine. The method is simple and rapid (<10 min) and allows the determination of six different arsenic species without sample pretreatment. Several instrumental parameters were studied to obtain the best performance (pH of buffer, injection mode, injection time, applied voltage). To determine the arsenic compounds, the instrument was used with a negative potential applied to the injection side of the capillary so that the anions can migrate towards the anode because of their own mobility and charge. The capillary wall was coated with an electro-osmotic flow modifier which reversed the electro-osmotic flow and thus increased also the overall migration of the anions towards the anode. The influence of high concentrations of matrix components such as NaCl, KNO₃ and NaNO₃, as well as the presence of acids such as HNO₃ and HCl was studied. CZE was used for the determination of the oxidation state of arsenic in percolate waters and in the leachate of solidified arsenic containing waste. The lowest detectable concentration was about 100 g/l. A comparison with the results obtained with hydride generation coupled to ICP-MS was made.     

Catalytic transformation of copaiba (Copaifera officinalis) oil over zeolite ZSM-5

The oil extracted from the trunk of the copaiba tree (Copaifera officinalis) is composed of sesquiterpenes, C₁₅H₂₄, and a small amount (>7 %) of sesquiterpenols, C₁₅H₂₆O; these were identified from their Kováts indices and mass spectra. The use of zeolites in the catalytic transformation of this renewable source of hydrocarbons is of interest in the search for new chemicals and ecologically clean fuels. Oil samples from copaiba trees growing in Colombia's Oriental Plains were circulated over zeolite ZSM-5 in a continuous flow fixed-bed micro reactor at 225, 265, and 325°C, for 1 h and subsequently analyzed by HRGC and GC-MS. Whereas only thirty four sesquiterpenes were identified in the original oil, over two hundred compounds were found in the product of the treatment of copaiba oil with zeolite ZSM-5. This complex mixture of sesquiterpenes, light aromatic compounds, and indene and naphthalene derivatives resulted from reactions such as isomerization, hydrogenation, cracking, and dehydrogenation with and without cracking. The amount of cracking products and aromatic compounds increased with reactor temperature but decreased with catalyst aging.     

Method Development of Enantiomer Separations by Affinity Capillary Electrophoresis,Cyclodextrin Electrokinetic Chromatography and Capillary Electrophoresis-Mass Spectrometry

 Capillary electrophoresis (CE) has become a powerful tool for enantiomer separations during the last decade. Since 1993, the author has investigated enantiomer separations by affinity capillary electrophoresis (affinity CE) with some proteins and by cyclodextrin electrokinetic chromatography (CDEKC) with some charged cyclodextrins (CDs). Many successful enantiomer separations are demonstrated from our study in this review article. In the enantiomer separations by affinity CE, the deterioration of detection     

In-channel indirect amperometric detection of heavy metal ions for electrophoresis on a poly(dimethylsiloxane) microchip

In-channel indirect amperometric detection mode for microchip capillary electrophoresis with positive separation electric field is successfully applied to some heavy metal ions. The influences of separation voltage, detection potential, the concentration and pH value of running buffer on the response of the detector have been investigated. An optimized condition of 1200 V separation voltage, −0.1 V detection potential, 20 mM (pH 4.46) running buffer of 2-(N-morpholino)ethanesulfonic acid (MES) + l-histidine (l-His) was selected. The results clearly showed that Pb²⁺, Cd²⁺, and Cu²⁺ were efficiently separated within 80 s in a 3.7 cm long native separation PDMS/PDMS channel and successfully detected at a single carbon fibre electrode. The theoretical plate numbers of Pb²⁺, Cd²⁺, and Cu²⁺ were 1.2 × 10⁵, 2.5 × 10⁵, and 1.9 × 10⁵ m⁻¹, respectively. The detection limits for Pb²⁺, Cd²⁺, and Cu²⁺ were 1.3, 3.3 and 7.4 μM (S/N = 3).     

Separation and determination of magnolol and honokiol inMagnolia officinalis bark by capillary zone electrophoresis

The effects of pH on separation parameters such as migration mobility, resolution, sensitivity, column efficiency and peak shape were emphatically studied. Better separation of magnolol and honokiol using capillary zone electrophoresis was achieved by optimizing pH in the range 5.0–11.7. The influences of applied voltage and temperature were also investigated. We adopted a better sample extraction procedure by which higher contents of honokiol and magnolol with sample compositions unchanged were obtained. The analysis was performed with direct UV detection using a 10 mM borate-10 mM phosphate buffer at pH of 11.6. The method was successfully applied to the simultaneous determination of magnolol and honokiol inMagnolia officinalis bark within 9 min.     

Mass spectrometric determination of selected microbial constituents using fused silica and chiral glass capillary gas chromatography

Summary Applications of quantitative gas chromatography/mass spectrometry (selected ion monitoring) to clinical and ecological microbiology are described. The technique permits determination of selected microbial metabolites and can be used for the rapid diagnosis of, for example, tuberculosis by ion-focusing of specific branch-chain fatty acids. The technique is also used to determine diaminopimelic and muramic acids, and D- and L-amino acids separated by chiral gas chromatography, in the low picogram range. The latter method has the potential to detect and quantitate microbial populations.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Nonaqueous capillary electrophoresis for rapid and sensitive determination of fangchinoline and tetrandrine in radix Stephaniae tetrandrae and its medicinal preparations

A simple, rapid, and sensitive non-aqueous capillary electrophoresis procedure with head-column field-amplified sample stacking concentration for the analysis of fangchinoline and tetrandrine is established. Optimum separation and stacking conditions were obtained when the sample was injected at 8 kV for 50 s after preliminary pressure injection of ethanol (16.9 kPa) for 0.6 s and separated with the buffer containing 50 mM ammonium acetate, 0.5% (v/v) acetic acid, and 50% (v/v) acetonitrile in methanol medium at 24 kV applied voltage. The analytes were detected by UV at 214 nm. The two bisbenzylisoquinoline alkaloids can be separated within 6 min and quantified with high sensitivity. The detection limits were 0.30 ng mL(-1) for fangchinoline and 0.34 ng mL(-1) for tetrandrine, which indicated that the sensitivities were at least 1000-fold enhanced over those reported in the literature as obtained by UV detection. The method was applied to the analysis of fangchinoline and tetrandrine in Radix Stephaniae tetrandrae and its medicinal preparations with good results.