Measurements of the spatially resolved electron temperature and plasma potential in ferrite-core side type Ar/He inductively-coupled plasmas

Spatial distributions of the effective electron temperature (T_eff) and plasma potential were studied from the measurement of an electron energy probability function in a side type ferrite-core inductively coupled plasma with an argon–helium mixture. As the helium gas was diluted at the fixed total gas pressure of 5 mTorr in an argon discharge, the distribution of the plasma density and plasma potential changed from a concave to a flat profile, and finally became a convex profile, while all spatial profiles of T_eff were hollow shapes with helium dilution in the argon discharge. This evolution of the plasma potential with helium gas could be explained by the increased energy relaxation length (λ_ε), indicating the transition of electron kinetics from local to non-local kinetics.     

Cooperative,Reversible Self‐Assembly of Covalently Pre‐Linked Proteins into Giant Fibrous Structures

We demonstrate a simple bioconjugate polymer system that undergoes reversible self‐assembling into extended fibrous structures, reminiscent of those observed in living systems. It is comprised of green fluorescent protein (GFP) molecules linked into linear oligomeric strands through click step growth polymerization with dialkyne poly(ethylene oxide) (PEO). Confocal microscopy, atomic force microscopy, and dynamic light scattering revealed that such strands form high persistence length fibers, with lengths reaching tens of micrometers, and uniform, sub‐100 nm widths. We ascribe this remarkable and robust form of self‐assembly to the cooperativity arising from the known tendency of GFP molecules to dimerize through localized hydrophobic patches and from their covalent pre‐linking with flexible PEO. Dissipative particle dynamics simulations of a coarse‐grained model of the system revealed its tendency to form elongated fibrous aggregates, suggesting the general nature of this mode of self‐assembly.     

水浴加热密闭溶样石墨炉原子吸收光谱法测定化探样品中的痕量金

以王水、氟化钾、Fe3+溶液为溶剂,对化探样品进行水浴加热分解1.5 h,经泡沫塑料吸附后,于90℃以上硫脲溶液中解吸20 min,然后采用石墨炉原子吸收光谱仪测定其中的金含量。对仪器分析条件进行了优化。金的质量分数在0.1~100.0 ng/g范围内与吸光度呈良好的线性,线性相关系数r2=0.999 3,检出限为0.100 ng/g。该方法对金标准物质测定结果的相对标准偏差为5.96%~9.25%(n=12),对国家一级标准物质进行分析,测定结果与标准值相符合。该方法满足1∶50 000化探样品中痕量金的分析要求。     

Ultrafast,Low‐Cost,and Mass Production of High‐Quality Graphene

Fast, mass, and low‐cost production of high‐quality graphene, which is alluring, remains a great challenge, even though some approaches have shown potential for mass synthesis of graphene. Very recently a great breakthrough was made by Tour and co‐workers (Nature 2020, 577, 647–651): in just a second, easily exfoliated and highly crystalline graphene was produced from abundant carbon‐containing species by cost‐effective flash Joule heating with a low energy input of 7.2 kJ per gram graphene. Such an ultrafast, economic, and scalable process for high‐quality graphene production can be considered as a milestone in the graphene field and is highlighted in this article.     

Single‐Mode Microwave Heating‐Induced Concurrent Out‐of‐Plane Twin Growth Suppression and In‐Plane Epitaxial Growth Promotion of b‐Oriented MFI Film under Mild Reaction Conditions

In this study, single‐mode microwave heating was applied in epitaxial growth of b‐oriented MFI seed monolayer prepared by facile manual assembly, resulting in the formation of well‐intergrown and highly b‐oriented MFI film with few twins. It exhibited a precise molecular sieving property at a reaction temperature no higher than 100 °C within 2 hours, therefore making it possible for easy operation in an open environment. The capability for concurrent suppression of undesired out‐of‐plane twin growth and promotion of in‐plane epitaxial growth rate under mild reaction conditions was attributed to the obvious superiority of single‐mode microwave heating in comparison with conventional multi‐mode microwave heating in aspects of microwave field uniformity and intensity. Our research indicated that the single‐mode microwave heating technique could potentially be a useful tool for improving the microstructure and therefore the performance of diverse zeolite films.     

Rapid assessment of the impact of microwave heating coupled with UV-C radiation on the degradation of PAHs from contaminated soil using FTIR and multivariate analysis

The presence and fate of polyaromatic hydrocarbons (PAHs) in the environment are receiving a great concern. In this study, three oil-contaminated soils (industrial area, Dukhan city, and artificial soils) were utilized to examine the effect of microwave (MW) heating and UV-C irradiation on the PAHs degradation. A rapid assessment of the impact was evaluated using Fourier transform infrared (FTIR) and multivariate analysis. The total organic matter values for the maximum PAHs reduction were evaluated based on the FTIR spectra of the contaminated soils followed with the principal component analysis (PCA). The results showed that the highest total organic carbon reduction was achieved for the industrial soil sample that required a high MW power and long MW exposure time. On the other hand, the Dukhan city soil sample, which has the lowest total organic carbon, required a high MW power and short MW exposure time followed by UV-C treatment for 20 min to reach the maximal FTIR transmittance reduction. The cluster analysis was also used to evaluate the impact of MW heating, and MW heating followed by UV-C irradiation on the degradation of PAHs. The PCA results of the industrial city sample showed that neither MW treatment (100% MW, 15 min exposure time) followed by UV-C treatment for 20 min nor 10 min is significantly different from the MW treatment (100% MW, 15 min exposure time). However, for the Dukhan sample, the UV-C treatment at 10 min after high MW power and long exposure time (100% MW, 15 min exposure time) was the most efficient treatment.     

分布振子复合板的模态阻尼及多点激励下阻尼减振相关性

分布阻尼振子可拓宽结构减振频带,因此可将振子分布于板中以形成复合板（简称“分布振子复合板”）,进而实现较宽的减振频带．对于多点支撑处受到宽频非一致激励（例如在不同激励点处的激励频率、幅值与相位有差异）的分布振子复合板,目前还缺乏有效简便的优化控制指标．在作者之前的研究中,针对含分布振子的梁推导了基于模态应变能的模态阻尼计算理论,讨论了模态阻尼与单点激励下梁的减振效果的相关性,并应用于宽频减振设计优化．本文进一步将模态阻尼计算理论推广到分布振子复合板,并将研究从梁的单点激励扩展到板的多点非一致激励下的阻尼减振相关性．首先,在利用模态应变能法推导得到分布振子复合板的模态阻尼计算公式后,从理论上讨论了不同边界条件与模态阶次对计算结果的影响,以及计算理论的适用性．而后,进一步通过有限元参数分析了边界条件、频率比、模态阶次与质量比的影响．最后,通过算例分析了无振子板或分布振子复合板在四个激励点具有多种幅值与相位组合情况下的稳态响应．结果表明,推导的模态阻尼计算公式可正确预测不同边界条件下的模态阻尼,且理论预测的模态阻尼与基板的稳态平均加速度减小率、稳态峰值应变能减小率均有较高的相关性．     

大尺寸电阻加热式碳化硅晶体生长热场设计与优化

大尺寸低缺陷碳化硅(SiC)单晶体是功率器件和射频(RF)器件的重要基础材料,物理气相传输(physical vapor transport, PVT)法是目前生长大尺寸SiC单晶体的主要方法。获得大尺寸高品质晶体的核心是通过调节组分、温度、压力实现气相组分在晶体生长界面均匀定向结晶,同时尽可能减小晶体的热应力。本文对电阻加热式8英寸(1英寸=2.54 cm)碳化硅大尺寸晶体生长系统展开热场设计研究。首先建立描述碳化硅原料受热分解热质输运及其多孔结构演变、系统热输运的物理和数学模型,进而使用数值模拟方法研究加热器位置、加热器功率和辐射孔径对温度分布的影响及其规律,并优化热场结构。数值模拟结果显示,通过优化散热孔形状、保温棉的结构等设计参数,电阻加热式大尺寸晶体生长系统在晶锭厚度变化、多孔介质原料消耗的情况下均能达到较低的晶体横向温度梯度和较高的纵向温度梯度。     

低压供热涂层材料制备及热性能研究

低压供热技术具有安全系数高和节能降耗等优势,因而成为石化稠油长输管线、风力发电叶片冬季防覆冰和室内供暖等领域的研究热点之一。本文制备了一系列低压供热涂层材料,研究不同碳功能填料对涂层发热速率、发热功率及最高发热温度的影响规律,并揭示石墨烯和碳纤维对提升涂层材料热性能的协同作用。其中石墨烯纳米片的还原程度对材料热性能具有重要影响,降低其表面官能团密度对提升涂层供热特性具有促进作用,但是官能团密度过低会导致石墨烯纳米片的团聚现象,引起涂层发热不均匀。加入适量碳纤维可以提高石墨烯的均匀分散性,提升发热速率。优化石墨烯纳米片和碳纤维的比例后,采用24V电压驱动时,涂层材料的发热速率达到7.1℃·s^-1,功率密度为800W·m^-2,最高发热温度为124℃。     

纳米晶型MnCo2O4的微波加热法制备及其电催化性能

以Co和Mn的醋酸盐为原料,采用共沉淀法制得草酸盐前驱物,加入一定量微波吸波剂乙炔黑后,用微波进行热处理制得复合氧化物MnCo2O4.X射线衍射和扫描电镜结果表明,产物为纳米晶型,结晶良好,纯度较高,粒径为10~20nm且分布均匀.在室温下、空气气氛中,以6mol/L的KOH溶液为电解液测试了由MnCo2O4制备的空气扩散电极对氧还原反应的催化效果.极化曲线显示,在-0.2V(vsHg/HgO)电位下,氧还原反应电流密度达96mA/cm2.为显示微波加热法的优越性,用马弗炉煅烧制备了MnCo2O4,并对两种热处理方法所得产物的物化性能进行了比较.