动态加载装置和动态测试技术

本文介绍了力学试验中各种类型冲击加载装置及有关的动态测试技术,讨论了分段式Hopkinson压杆装置的加载特性、主要优点、用途以及在该装置上采用的一些测量新技术。文章中提出的应力波调节器,结构简单,重复性好,是动态光测技术中一种崭新的冲击加载装置。     

Effect of upstream velocity profile and integral flow straighteners on turbine flowmeters

One of the most important factors determining the shape of the calibration curve for a given turbine meter is the change in the upstream velocity distribution with flowrate. A theoretical model is evolved which can be used to predict the effects of velocity profile, viscosity and swirl on the calibration curve. It has also been used to explain the calibration curve of a commercial meter having a geometry very different from that for which the theory was developed. The effect of different types of integral flow straighteners on turbine meters is also investigated and found to depend on both the number of vanes and their length. A correlation is suggested for radial-vaned flow-straighteners     

环形光纤激光器自混合散斑数值模拟及频谱性能分析

在环形激光器的理论基础上,结合环形掺铒光纤激光器自混合散斑速度传感实验系统,数值模拟了激光器自混合散斑信号的功率输出.分析了自混合散斑信号的平均散斑频率,频谱能量密度性能.研究结果表明,频谱平均频率与物体速度成近似的线性关系,频谱能量密度与探测距离成近似线性关系.     

Non-contacting laser based displacement measurements from solid objects

This note reports a laser Doppler interferometer for measuring the axial motion of solid targets which have had no prior preparation. Both magnitude and sense of motion are measured to a resolution at least 0.316 μm usinga passive optical system and simple signal processing, making the device relatively cheap to construct. Results indicate that the LDI is capable of good linearity over a substantial range of target amplitudes and has a reasonable degree of immunity from speckle effects.     

从相关测量的数据恢复超短激光脉冲的波形

本文证明了,只要测量了脉冲光强的二阶相关函数G~(2)(τ)和单延迟的三阶相关函数G~(3)(τ),便可以恢复超短激光脉冲的强度波形。并提出一种恢复脉冲波形的计算方法,编制了计算机程序,对实验数据作了处理,证实这种计算方法是可行的。在此基础上建议一种通过相关测量确定超短激光脉冲波形的新型仪器。     

空间轴对称变形界面裂纹尖端的应力奇异性分析

假定位移场,并将位移势函数展开成一系列的特征函数,代入空间轴对称变形的基本方程,推得界面裂纹的特征值理论。把这一理论应用到单向增强的连续纤维复合材料上,建立了纤维断裂、基体开裂等模型下应力奇异性的特征方程,分析了界面裂纹尖端的应力奇异性。     

Neutron scattering by anharmonic crystals and the effect of sublattice displacements

A theory has been given for the scattering of neutrons by anharmonic crystals, for which terms of the typeV ⁽³⁾ (k _1j1; —k _1j1;o _j) which contribute to the sublattice displacements are not neglected. Using the standard perturbation theory in the interaction picture or Green’s function method, an expression has been derived for the differential scattering cross-section which brings in the shift and the width of the phonons in one-phonon energy exchange processes. It is shown that the sublattice displacements will modify the phase factor arising from the scattering by any atom in the unit cell, and the Debye-Waller factor also gets altered both by the sublattice displacements as well as by higher order terms arising from anharmonicity. It is shown that the differential scattering cross-section contains a term linearly depending on the third order anharmonicity coefficientV ⁽³⁾ (k _1j1;k _2j2;k _3j3) and neutron scattering by crystals should provide a useful method for evaluating the third order anharmonicity coefficients.     

位移测量中真空室偶极涡流的影响及其扣除

一、真空室上偶极涡流对测量的影响 在托卡马克放电中,出现宏观不稳定性时,等离子体电流会出现小的正尖峰,并在整个大环上沿水平方向向内快速收缩。这时真空室(薄不锈钢壳)上会感应出很大偶极涡流,如图1所示,真空室上偶极电流分布为     

Ultrasonic SH wave velocity in textured aluminium plates

Neutron diffraction has been used to measure the crystallite orientation distribution function for a sample of rolled aluminium plate. Based on this study an expression is given for the ultrasonic velocity of the fundamental horizontally polarized shear (SH) wave propagating in the plane of the plate at an angle θ to the rolling direction. This expression is correct to second order in the leading texture component and is compared with the exact numerical result and with measurements of the SH wave velocity for this plate. In textured materials the group and phase velocities are not, in general, parallel and an expression for the angle between them is derived. Inclusion of this effect leads to better agreement between experiment and theory. The results have application to the texture-independent determination of stress with ultrasonics recently proposed by MacDonald and Thompson et al.     

Residual stress determination in aluminium using electromagnetic acoustic transducers

The residual stresses in a shrink-fit specimen were measured ultrasonically, using shear-horizonal (SH) waves transmitted and received by noncontacting electromagnetic acoustic transducers. The presence of stress induces a small change in the velocity of the SH-waves. The difference in velocities of orthogonally polarized SH-waves (acoustic birefringence) was measured with a simple time-interval averaging system; this velocity difference can be related to the difference of principal stresses. The presence of material anisotropy (texture) in the specimen also causes relative velocity changes comparable to stress-induced changes. A simple method was used to remove the anisotropy-dependent component of the total relative velocity change, thereby allowing a determination of residual stress. This method consisted of measuring the birefringence in unstressed reference specimens and subtracting it from the birefringence measured at stressed locations. For the specimen used here, good agreement between theoretical and experimental values of stress was obtained.