能动磨盘变形检测中的各误差因素分析

针对现有f530 mm能动磨盘的检测系统（有效检测口径f420 mm）,系统分析了检测过程中的球头误差、传感器安装角度误差和坐标定位误差,并给出了各项误差对检测精度的影响。同时,还针对检测基座不完全水平的问题建立模型,应用最小二乘法实现了检测数据的去倾斜处理。给出了实测数据去倾斜前后和误差补偿前后的检测精度对比情况,结果表明去倾斜算法能较好地还原实测数据,补偿检测中的系统误差有助于提高检测精度。     

基于LMS自适应时延估计和FPGA的超声波测风系统研究

利用超声波传感器进行风速测量时,温度对超声波传播有很大影响,时延估计对超声波测风系统的精度起到很大的作用。本超声波测风系统为避免温度对风速测量中的影响,采用了基于时差法的测量原理,为了提高时延估计值的精度,提出了基于最小均方(LMS)自适应时延估计的测量方法,研制了以单片机Atmega128和现场可编程门阵列(FPGA)为核心的硬件系统。仿真和实际测试的结果表明,该超声波测风系统的时延估计值精确度较高,具有很高的应用价值。     

替代法测量微安表内阻的不确定度分析

在测量微安表内阻的众多方法中,替代法是最简单的方法。本文全面分析了影响测量结果不确定度的因素,求出了实验测量的最佳条件,计算了普通仪器组合下测量结果的相对不确定度。     

量子测量对三维光子晶体中Λ型原子动力学性质的影响

讨论了量子测量对各向异性光子晶体中Λ型激发态原子衰减的影响，主要包括衰减的抑制和加速效应.研究发现，这样的量子测量效应不仅与原子共振频率相对于光子晶体带边的位置有关，还与量子测量本身的频率大小相关.由于各向异性光子晶体的影响，较小频率的量子测量也能得到抑制衰减的效应. 关键词： 量子测量 量子Zeno 和 反Zeno效应 光子晶体     

Broadband Analysis of Holographic Power Combining Circuits

Holography is a promising technique for power combining applications in the frequency range of short millimeter and submillimeter waves. In this paper, quasi-optical holographic power combining circuits are investigated. An equivalent network is utilized which rigorously models horn arrays and biperiodic dielectric structures in order to design computer-generated holograms. We apply the network model to a 5-element quasi-optical power combiner and demonstrate its capability. The hologram is designed for 150 GHz and has an efficiency of 92.5 % with a 90 % bandwidth of 5.3 %. With the aid of a broadband waveguide power divider and a vector field measurement system, the circuit is analyzed.     

Effect of laser irradiation of C-V characteristics of electrodeposited Ag/Tl-2223/CdSe hetero-nanostructures

One of the innovative technological directions for the high-temperature superconductors has been persued by fabricating the heteroepitaxial multilayer structures such as superconductor-semiconductor heterostructures. In the present investigation, metal/superconductor/semiconductor (Ag/Tl-2223/CdSe) hetero-nanostructures have successfully been fabricated using dc electrodeposition technique and were characterized by X-ray diffraction (XRD), full-width at half-maximum (FWHM) and scanning electron microscopy (SEM) studies. The measurement of junction capacitance as a function of biasing voltage was used for the estimation of junction built-in-potential (V _D) and to study the charge distribution in a heterojunction. The Mott-Schottky plots were measured for each junction in dark and under the photo-irradiation. The effect of laser irradiation on C-V characteristics of hetero-nanostructure has been studied.     

一种基于热离子二极管的大功率微波探测器

 主要给出了波导型的X波段大功率微波探测器的结构、标定方法和标定结果。该新型大功率微波探测器具有承受微波峰值功率高（可达100 kW）,时间响应快（响应时间小于2.0 ns）,不需要同步信号,抗干扰能力强等特点。根据不同的需要,可以制作成波导型和同轴型的大功率微波探测器。波导型探测器由热离子二极管、标准波导、滤波器和外电路组成,其工作频率范围为波导的工作频率范围;而同轴型探测器由热离子二极管、同轴波导,滤波器和外电路组成,可以宽带使用。标定结果表明该探测器很适合高功率微波峰值功率测量,尤其是在强电磁干扰环境和高重频微波脉冲条件下的测量,为解决功率测量不准的技术难题提供一种有效的技术手段。     

合肥光源相空间测量

 介绍了在合肥光源（HLS）上的相空间测量系统和测量结果,同时进行了工作点(Tune值)的计算。研究了电子储存环上三种相空间测量和计算方法：双位置单圈法、单位置双圈法和单位置单圈法。通过对仿真数据的计算和比较,论证了这三种方法的正确性和可行性,并分析了这三种方法的适用条件和在不同条件下的优缺点,为合肥光源的相空间测量提供了新的设计思路。     

动态激光衍射法测量细丝直径

基于夫琅禾费衍射理论和巴比涅互补原理,提出了利用激光衍射对细丝直径进行动态测量的方法.该方法具有测量精度高、速度快、非接触、使用方便且易于微机联接实现自动化测量等优点.     

An optical measurement of vortex shape at a free surface

We have proposed an optical method of vortex shape measurement based on Fourier transform profilometry (FTP) and verified it by experiment. The results of our experiment proposed in this paper show that FTP can efficiently reconstruct the vortex shape at a free surface and this method is suitable for wide use in studying such problems as liquid shear flow, wake of an object, flow behind a bluff body, and wetting angle.