Particle dispersion in a single-sided backward-facing step flow

The paper describes the particle dispersion in a single-sided backward-facing step flow. Particles of well-known sizes in the diameter range from 1 to 70 μm were suspended in an air flow and the particle motion over a step was measured by mean of a laser-Doppler anemometer. Thus, the local and integral flow quantities, i.e. the mean and turbulent velocity data could be measured precisely. In the experiments, monodispersed particle size distributions were used to exclude particle size related information ambiguity, known as triggering effects or size bias. The results of this study show qualitatively and quantitatively the difference in time-averaged particle dynamics for selected particle sizes in a backward-facing step flow. The experiments show, for different sizes, the changes in the particle velocity field in comparison with the velocity field of the continuous phase deduced from the 1 μm particles, and also imply the strong influences which different particle sizes have on flow data evaluation when size effects are not taken into account with particle-related optical measuring techniques.     

Geometric properties of two phase flow in geothermal reservoirs

The two phase flow equations frequently used in geothermal engineering ignore capillary pressure, which results in a singular system of equations. Analysis of these equations reveals three mechanisms for altering saturation: local boiling, the spatial dependence of flowing enthalpy due to the convective transport of fluid, and counterflow. A scalar function is associated with each of these three mechanims. At each point in space, flows are essentially two dimensional, with gravity establishing a vertical hierarchy, in that volumetric, energy and mass fluxes can never point below a lower member in this triple. With increasing liquid saturation, the characteristics associated with the saturation equation move up from below this grouping of directions, and eventually may even point above volumetric fluxes. Finally, weak shocks and the associated entropy condition are considered. The characteristics of the saturation equation coincide with the velocity of extremely weak shocks, and saturation increases with the passage of a weak shock, provided the magnitude of the characteristic speed increases with saturation.Notation C_l liquid heat capacity - C_m rock heat capacity - C_v vapour heat capacity - G counterflow energy flux - h flowing enthalpy - hl liquid enthalpy - h_v vapour enthalpy - k permeability - k downward vector - P pressure - S liquid saturation - T temperature - dT/dP derivative at saturation - z vertical coordinate - l liquid viscosity - v vapour viscosity - Pl liquid density - _m rock density - _v vapour density - porosity     

Topography and Dispersion Effects in Bottom Layer Dynamics

A hyperbolic model of a shallow water flow is considered with allowance for nonlinear and dispersion effects. The structure of traveling waves above a flat bottom is studied. Stability of small disturbances of a homogeneous flow and development of instability of a nonstationary flow above an inclined bottom are analyzed.     

自适应结构多工况下强度控制的研究

对自适应超静定桁架结构的强度控制问题进行了研究，把模型从单一工况推广到了多工况，实现了理论的完整性，定义了结构工作状态系数， 分析了作动器的联入对结构强度的影响，利用超静定桁架的耦合特性和作动器的调节功能，把强度控制问题转化为数学规划问题，方法简单有效。     

软管流量调节器调节特性分析及设计准则

分析了大雷诺数下软管的流量调节行为；导出了流量随下游压力的函数关系，即流量调节特性曲线；提出了以软管作为能动元件的流量调节器设计准则．     

软粘土卸载特性计算模型研究

本文从三个方面对软粘土的卸载特性进行了理论研究。采用太沙基一维固结理论，编制了内嵌固结计算的修正剑桥模型程序．对软粘土卸载强度进行了分析。推导了基于修正剑桥模型的孔压表达式并编制了相应的程序对软粘土的卸载孔压特性进行了研究，结果显示，在伸长条件下．孔压先由零逐渐发展到负的最大值．然后又逐渐减小至零。突破零位后，发展成为正孔压并最后达到正的最大值。围压越大，产生的负孔压的极值越大，最终的正孔压越小。将传统边界面模型的线弹性卸载过程改进为弹塑性．建立了软粘土的边界面广义弹塑性模型，从而使边界面模型可用于分析软粘土卸载过程中的塑性变形问题。理论分析结果与试验进行了比较验证，证明理论研究方法是可行的。     

Existence and uniqueness of optimal solutions for multirate partial differential algebraic equations

The numerical simulation of electric circuits including multirate signals can be done by a model based on partial differential algebraic equations. In the case of frequency modulated signals, a local frequency function appears as a degree of freedom in the model. Thus the determination of a solution with a minimum amount of variation is feasible, which allows for resolving on relatively coarse grids. We prove the existence and uniqueness of the optimal solutions in the case of initial-boundary value problems as well as biperiodic boundary value problems. The minimisation problems are also investigated and interpreted in the context of optimal control. Furthermore, we construct a method of characteristics for the computation of optimal solutions in biperiodic problems. Numerical simulations of test examples are presented.     

Dye and its removal from aqueous solution by adsorption: A review

In this review article the authors presented up to-date development on the application of adsorption in the removal of dyes from aqueous solution. This review article provides extensive literature information about dyes, its classification and toxicity, various treatment methods, and dye adsorption characteristics by various adsorbents. One of the objectives of this review article is to organise the scattered available information on various aspects on a wide range of potentially effective adsorbents in the removal of dyes. Therefore, an extensive list of various adsorbents such as natural materials, waste materials from industry, agricultural by-products, and biomass based activated carbon in the removal of various dyes has been compiled here. Dye bearing waste treatment by adsorption using low cost alternative adsorbent is a demanding area as it has double benefits i.e. water treatment and waste management. Further, activated carbon from biomass has the advantage of offering an effected low cost replacement for non-renewable coal based granular activated carbon provided that they have similar or better adsorption on efficiency. The effectiveness of various adsorbents under different physico-chemical process parameters and their comparative adsorption capacity towards dye adsorption has also been presented. This review paper also includes the affective adsorption factors of dye such as solution pH, initial dye concentration, adsorbent dosage, and temperature. The applicability of various adsorption kinetic models and isotherm models for dye removal by wide range of adsorbents is also reported here. Conclusions have been drawn from the literature reviewed and few suggestions for future research are proposed.     

Cycloaddition reactions: a controlled approach for carbon nanotube functionalization

Controlled functionalization of carbon nanotubes (CNTs) through the use of cycloaddition reactions is described. By employing various cycloaddition reactions, a wide range of molecules could be coupled onto CNTs without disruption of the structural integrity as well as with a statistical distribution of functional groups onto the surface of the CNTs. The cycloaddition reactions represent an effective and tailored approach for preparing CNT-based advanced hybrid materials that would be useful for a wide range of applications from nanobiotechnology to nanoelectronics.     

Application of multiwall carbon nanotubes-based matrix solid phase dispersion extraction for determination of hormones in butter by gas chromatography mass spectrometry

The multiwall carbon nanotubes (MWCNTs)-based matrix solid phase dispersion (MSPD) was applied for the extraction of hormones, including 17-α-ethinylestradiol, 17-α-estradiol, estriol, 17-β-estradiol, estrone, medroxyprogesterone, progesterone and norethisterone acetate in butter samples. The method includes MSPD extraction of the target analytes from butter samples, derivatization of hormones with heptafluorobutyric acid anhydride-acetonitrile mixture, and determination by gas chromatography-mass spectrometry. The mixture containing 0.30 g graphitized MWCNTs and 0.10 g MWCNTs was selected as absorbent. Ethyl acetate was used as elution solvent. The elution solvent volume and flow rate were 12 mL and 0.9 mL min(-1), respectively. The recoveries of hormones obtained by analyzing the five spiked butter samples were from 84.5 to 111.2% and relative standard deviations from 1.9 to 8.9%. Limits of detection and quantification for determining the analytes were in the range of 0.2-1.3 and 0.8-4.5 μg kg(-1), respectively. Compared with other traditional methods, the proposed method is simpler in the operation and shorter in the sample pretreatment time.