Thermal behaviour and firing characteristics of Zr/KClO4 primer mixture containing CuO

The effect of CuO on the thermal behaviour of Zr/KClO₄ primer mixtures was studied by thermoanalytical techniques, and the Bruceton method and its related calculation. It was found that the CuO catalytically promoted the decomposition of Zr/KClO₄ primer mixtures and shifted the exothermic peak of DSC curves to lower temperatures. In addition, the Zr/KClO₄ primer mixture containing CuO had a significant effect on the firing characteristics of electro-explosive devices.     

Simulation of RAFT Dispersion Polymerization in Supercritical Carbon Dioxide

The RAFT radical polymerization of vinyl monomers in supercritical carbon dioxide was modeled using the Predici® simulation package. The sensitivity of polymerization responses on formulation and process variables was analyzed. The simulations were carried out using kinetic and physical parameters corresponding to the polymerization of methyl methacrylate in supercritical carbon dioxide, using AIBN as initiator, at 65 °C and 200 bar, and using values of the addition and fragmentation kinetic rate constants of a “typical” RAFT agent, as reference conditions. This is the first report in the literature addressing the modeling or simulation of RAFT polymerization in supercritical carbon dioxide.

     

Molecular dynamics comparative study of methane–nitrogen and methane–nitrogen–ethane systems

This work concerns the site–site interaction study of 256 particles using the Buckingham potential model. We have calculated the new parameters of the Buckingham potential using an iterative algorithm with a mean square method. This adapted model allows determining the characteristics for each state point. We have applied this model to study the liquefied natural gas LNG properties for methane-nitrogen and methane–nitrogen–ethane mixtures by molecular dynamics. We have calculated the thermodynamic, dynamic and structural properties for both the microcanonical NVT and the isothermal-isobaric NPT ensembles of binary and ternary systems from the SP₁ to SP₉ points. Then, we have compared the results between binary and ternary systems. We have obtained a good prediction on transport properties. From the calculated values of self-diffusion coefficient and viscosity, we have confirmed the liquid state of the liquefied natural gas LNG system.     

Glassy Carbon Electrodes Modified with Multiwall Carbon Nanotubes Dispersed in Polylysine

We report the analytical performance of glassy carbon electrodes (GCE) modified with a dispersion of multiwall carbon nanotubes (MWCNT) in polylysine (Plys) (GCE/MWCNT‐Plys). The resulting electrodes show an excellent electrocatalytic activity towards different bioanalytes like ascorbic acid, uric acid and hydrogen peroxide, with important decrease in their oxidation overvoltages. The dispersion of 1.0 mg/mL MWCNT in 1.0 mg/mL polylysine is highly stable, since after 2 weeks the sensitivity for hydrogen peroxide at GCE modified with this dispersion remained in a 90% of the original value. The MWCNT‐Plys layer immobilized on glassy carbon electrodes has been also used as a platform to build supramolecular architectures by self‐assembling of polyelectrolytes based on the polycationic nature of the polylysine used to disperse the nanotubes. The self‐assembling of glucose oxidase has allowed us to obtain a supramolecular multistructure for glucose biosensing. The influence of glucose oxidase concentration and adsorption time as well as the effect of using polylysine or MWCNT‐Plys as polycationic layers for further adsorption of GOx is also evaluated.     

原位合成CoPc/SnO2的键合特性及可见光光催化活性

报道了酞菁钴(CoPc)分子原位自组装于纳米SnO2颗粒表面, CoPc大环分子与SnO2表面形成Co—O轴向相互作用, 测定了原位合成方法(标记为i)制备的CoPc/SnO2(i)与浸渍法(标记为d)制备CoPc/SnO2(d)间的结合特性, 并进行了可见光光催化表征及CoPc敏化机理探讨. 结果表明, 在结合位点数相当的情况下, CoPc/SnO2(i)结合常数比CoPc/SnO2(d)的高两个数量级, 前者的光催化效率亦比后者高32.5%(光照150 min), 且CoPc/SnO2(i)光催化稳定性较高(重复十次循环使用). 其CoPc敏化SnO2的机理为, 由于敏化剂与半导体之间存在的强相互作用, 不仅增强了光生电荷在CoPc的LUMO与SnO2半导体导带间的导入效率及光生电荷对的分离效率, 而且提高了敏化剂的负载稳定性与循环光催化效率的持续性.     

韭菜中吡虫啉和啶虫脒残留的微波处理-逆固相分散法净化及液相色谱检测

建立了韭菜中两种烟碱类农药吡虫啉和啶虫脒残留的快速检测方法.韭菜样本用微波炉加热处理,使酶钝化消除含硫基质干扰,然后用乙腈提取、逆固相分散净化,用反相高效液相色谱-二极管阵列检测器检测.在0.05～2.0 mg/kg添加水平范围内,吡虫啉的平均添加回收率在95.2%～105.3%之间;相对标准偏差在0.8%～7.8%之间;啶虫脒的平均添加回收率在97.4%～108.8%之间;相对标准偏差在1.3%～8.3%之间.本方法对吡虫啉的检出限(LOD)为0.0078 mg/kg,定量检出限(LOQ)为0.026 mg/kg;对啶虫脒的检出限为0.0075 mg/kg,定量检出限为0.025 mg/kg.     

Determination of phenylureas herbicides in food stuffs based on matrix solid-phase dispersion extraction and capillary electrophoresis with electrochemiluminescence detection

A new method based on matrix solid phase dispersion-capillary electrophoresis with electrochemiluminescence detection (MSPD-CE-ECL) has been developed for the simultaneous determination of three kinds of phenylurea herbicides (PHUs). Poly-β-cyclodextrin (poly-β-CD) was used as an additive in the running buffer to improve the separation of three analytes. The conditions for CE separation, ECL detection and effect of poly-β-CD were investigated in detail. Under the optimal conditions, three kinds of herbicides (isoproturon, linuron and diuron) were well separated and detected within 8 min. The linear ranges of the standard solution for isoproturon and linuron were 1-300 μg L(-1) with a detection limit (S/N=3) of 0.1 μg L(-1), and for diuron was 2-500 μg L(-1) with a detection limit of 0.2 μg L(-1). The average recoveries were in the range of 86.9-102.8%, and all relative standard deviation of the migration time and the ECL intensity in intraday and interday were less than 9.0%. The proposed method was also applied to the determination of three kinds of herbicides in green vegetable and rice samples with recoveries in the range from 78.1 to 93.8%.     

A facile "dispersion-decomposition" route to metal sulfide nanocrystals

In this paper, we demonstrate a simple and general "dispersion-decomposition" approach to the synthesis of metal sulfide nanocrystals with the assistance of alkylthiol. This is a direct heating process without precursor injection. By using inorganic metal salts and alkylthiol as the raw materials, high-quality Ag(2)S, Cu(2)S, PbS, Ni(3)S(4), CdS, and ZnS nanocrystals were successfully synthesized. The mechanism study shows that the reaction undergoes two steps. A key intermediate compound, metal thiolate, is generated first. It melts and disperses into the solvent at a relatively low temperature, and then it decomposes into metal sulfide as a single precursor upon heating. This method avoids using toxic phosphine agent and injection during the reaction process. The size and shape of the nanocrystal can be also controlled by the concentration of the reactant and ligands. Furthermore, the optical properties and assembly of the nanocrystals have also been studied. This report provides a facile, direct-heating "dispersion-decomposition" approach to synthesize metal sulfides nanocrystals that has potential for future large-scale synthesis.     

超声喷雾共沉淀法制备纳米氧化锡粉体及其气敏性研究

采用超声波喷雾技术,以SnCl4·5H2O和CO(NH2)2为前驱体原料制备了氧化锡以及Ce稀土离子掺杂纳米粉体.详细地研究了超声喷雾条件、反应时间以及化学组分对纳米SnO2粉体的形貌和尺寸的影响规律,以及前驱体沉淀物脱水化学处理的条件.用XRD,TEM研究了所获纳米粒子的晶相和形貌.结果表明,制备的SnO2纳米粒子呈球状,尺寸在10～20 nm,纳米颗粒均匀,分散性好.以该粉体为基础制备了相应的气敏元件,测定了气体灵敏度与温度和稀土元素掺杂的关系.研究测试表明,纳米SnO2半导体气敏元件对NO2气体有着良好的响应-恢复特性,并且具有较高的灵敏度和较低的工作温度.稀土元素铈的掺杂能明显提高纳米SnO2粉体的气敏性能.     

Trends and recent applications of matrix solid-phase dispersion

Matrix solid-phase dispersion (MSPD) is a sample-preparation technique with increasing acceptance in trace analysis of organic compounds using chromatographic and electro-driven separation techniques. It has been applied to the extraction and fractionation of a large number of substances from solid, semi-solid, and liquid matrices. Low sample and solvents consumption, straightforward application, and reduced cost, and its ability to simultaneously perform extraction and clean-up in a single step, are some of its major advantages. This review attempts to provide an updated, concise and critical overview on the latest trends and applications of MSPD, placing emphasis on comparison of its performance with that of other techniques, besides focusing on practical features to take into account depending on the nature of the sample and the properties of the analytes. Achievements, advantages, and limitations are discussed. The paper also highlights future challenges to be faced.