Nonlinear free vibrations of porous composite microplates incorporating various microstructural-dependent strain gradient tensors

The main objective of the present numerical analysis is to predict the nonlinear frequency ratios associated with the nonlinear free vibration response of porous composite plates at microscale in the presence of different microstructural gradient tensors. To achieve this end, by taking cubic-type elements into account, isogeometric models of porous composite microplates are obtained with and without a central cutout and relevant to various porosity patterns of distribution along the plate thickness. The established unconventional models have the capability to capture the effects of various unconventional gradient tensors continuity on the basis of a refined shear deformable plate formulation. For the simply supported microsized uniform porous functionally graded material (U-PFGM) plate having the oscillation amplitude equal to the plate thickness, it is revealed that the rotation gradient tensor causes to reduce the frequency ratio about 0.73%, the dilatation gradient tensor causes to reduce it about 1.93%, and the deviatoric stretch gradient tensor leads to a decrease of it about 5.19%. On the other hand, for the clamped microsized U-PFGM plate having the oscillation amplitude equal to the plate thickness, these percentages are equal to 0.62%, 1.64%, and 4.40%, respectively. Accordingly, it is found that by changing the boundary conditions from clamped to simply supported, the effect of microsize on the reduction of frequency ratio decreases a bit.

     

Phase behavior in mixtures of a homopolymer and a block copolymer. 4. SALS and SAXS studies

Phase behavior of blends of poly(vinyl methyl ether) (PVME) with four styrene-butadiene-styrene (SBS) triblock copolymers, being of various molecular weights, architecture, and compositions, was investigated by small-angle light scattering. Small-angle X-ray scattering investigation was accomplished for one blend. Low critical solution temperature (LCST) and a unique phase behavior, resembling upper critical solution temperature (UCST), were observed. It was found that the architecture of the copolymer greatly influenced the phase behavior of the blends. Random phase approximation theory was used to calculate the spinodal phase transition curves of the ABA/C and BAB/C systems; LCST and resembling UCST phase behavior were observed as the parameters of the system changed. Qualitatively, the experimental and the theoretical results are consistent with each other. © 1996 John Wiley & Sons, Inc.     

A control volume finite element method for three-dimensional three-phase flows

A novel control volume finite element method with adaptive anisotropic unstructured meshes is presented for three-dimensional three-phase flows with interfacial tension. The numerical framework consists of a mixed control volume and finite element formulation with a new P₁DG-P₂ elements (linear discontinuous velocity between elements and quadratic continuous pressure between elements). A “volume of fluid” type method is used for the interface capturing, which is based on compressive control volume advection and second-order finite element methods. A force-balanced continuum surface force model is employed for the interfacial tension on unstructured meshes. The interfacial tension coefficient decomposition method is also used to deal with interfacial tension pairings between different phases. Numerical examples of benchmark tests and the dynamics of three-dimensional three-phase rising bubble, and droplet impact are presented. The results are compared with the analytical solutions and previously published experimental data, demonstrating the capability of the present method.     

正电子冲击下氦电离三重微分截面的理论计算

我们发展了一种正电子碰撞原子电离的畸变波Born近似方法, 在这个方法中,正负电子偶素通道通过一个ab initio的光学势附加到入射粒子和靶的相互作用势上,且通道对电离作用被第一次被考虑在正电子碰撞原子电离的过程中. 应用这个方法计算了在50 eV入射能量范围氦的电离的三重微分截面,计算结果和实验数据很好的符合.     

A discontinuous Galerkin immersed boundary solver for compressible flows: Adaptive local time stepping for artificial viscosity–based shock-capturing on cut cells

We present a higher-order cut cell immersed boundary method (IBM) for the simulation of high Mach number flows. As a novelty on a cut cell grid, we evaluate an adaptive local time stepping (LTS) scheme in combination with an artificial viscosity–based shock-capturing approach. The cut cell grid is optimized by a nonintrusive cell agglomeration strategy in order to avoid problems with small or ill-shaped cut cells. Our approach is based on a discontinuous Galerkin discretization of the compressible Euler equations, where the immersed boundary is implicitly defined by the zero isocontour of a level set function. In flow configurations with high Mach numbers, a numerical shock-capturing mechanism is crucial in order to prevent unphysical oscillations of the polynomial approximation in the vicinity of shocks. We achieve this by means of a viscous smoothing where the artificial viscosity follows from a modal decay sensor that has been adapted to the IBM. The problem of the severe time step restriction caused by the additional second-order diffusive term and small nonagglomerated cut cells is addressed by using an adaptive LTS algorithm. The robustness, stability, and accuracy of our approach are verified for several common test cases. Moreover, the results show that our approach lowers the computational costs drastically, especially for unsteady IBM problems with complex geometries.     

薄板弯曲分析的节点积分高阶无网格法

采用高阶无网格法求解薄板弯曲问题,在已发展的线性曲率光顺方案的基础上,通过引入泰勒展开技术,建立了能够精确再现纯弯曲和线性弯曲模式的节点积分方法。与之相比,目前无网格薄板分析主要采用的节点积分方法仅能精确再现纯弯曲模式。数值结果表明,本文方法可精确通过纯弯曲和线性弯曲试验,且能得到光滑、无振荡的弯矩场。与标准的高斯积分方法和目前已存在的节点积分方法相比,本文方法在计算精度、效率以及弯矩分布等方面均展现出显著优势。     

Calculation of Vertical Ionization Potentials of Oxygen Difluoride,Difluoramine, and Difluoromethane by Local Density Approximation

The vertical ionization potentials of OF₂, HNF₂, and CH₂F₂ were computed by the deMon density functional program. The results are compared with earlier calculations and with experiment. The average absolute deviation of the 21 computed ionization potentials of the outer valence electrons from experiment is 0.44 eV, which compares well with 0.37 eV for frozen-orbital configuration-interaction calculations. Although this performance is not as good as perturbation corrections to Koopmans' theorem, the computation requirements are much less demanding.     

Application of Short-wave Near-infrared Reflectance Spectroscopy in Controlling Extract of Fructus Cnidii Using Supercritical Carbon Dioxide

Fructus cnidii （Chinese name shechuangzi） is the fruit produced by Cnidium monnieri （L.） Cusson （Umbelliferae）. It is a perennial herb that is used to treat skin-related diseases and gynecopathyell. Recent pharmacological studies have revealed crude extracts or components isolated from fructus cnidii possess antiallergic, antipruritic, antidermatophytic, antibacterial, antifungal, and antiosteoporotic activities. Osthole and imperatorin are the major compounds present in shechuangzi. They are often used as standards for the evaluation of the quality of shechuangzi products.     

Vibrational isotope effect by the low rank perturbation method

Mathematical formalism of the Low Rank Perturbation method (LRP) is applied to the vibrational isotope effect in the harmonic approximation with a standard assumption that force field does not change under isotopic substitutions. A pair of two n-atom isotopic molecules A and B which are identical except for isotopic substitutions at ρ atomic sites is considered. In the LRP approach vibrational frequencies ω _k and normal modes of the isotopomer B are expressed in terms of the vibrational frequencies ν _i and normal modes of the parent molecule A. In those relations complete specification of the normal modes is not required. Only amplitudes at sites τ affected by the isotopic substitutions and in the coordinate direction s (s = x, y, z) are needed. Out-of-plane vibrations of the (H,D)-benzene isotopomers are considered. Standard error of the LRP frequencies with respect to the DFT frequencies is on average . This error is due to the uncertainty of the input data (± 0.5 cm⁻¹) and in the absence of those uncertainties and in the harmonic approximation it should disappear. In comparing with experiment, one finds that LRP frequencies reproduces experimental frequencies of (H,D)-benzene isotopomers better () than scaled DFT frequencies () which are designed to minimize (by frequency scaling technique) this error. In addition, LRP is conceptually and numerically simple and it also provides a new insight in the vibrational isotope effect in the harmonic approximation.     

Predicting ion selectivity in water purification by capacitive deionization: Electric double layer models

Ion-selective water treatment is needed to address emerging problems in an energy- and cost-efficient manner. Capacitive deionization (CDI) is a membraneless water treatment technology, which relies on storing ions in charged electric double layers (EDLs) of micropores. CDI has shown remarkable selectivity, with local density approximations (LDAs) showing some success in guiding selective separations. However, many underlying processes are represented by lumped fitting parameters in LDA models, hindering further progress. Atomistic models help unravel selectivity mechanisms, but are difficult to integrate with cell-level CDI theory. Here, we review and extend LDA models for CDI, highlight a knowledge gap in connecting between LDA and atomistic models for CDI, and emphasize and build upon analogies between micropore EDLs and nanofiltration membranes.