数码相机原理与系统设计研究

介绍了数码相机的工作原理 ,分析了数码相机的系统结构 ,提出了设计数码相机的处理流程。典型的数码相机系统有镜头、闪光灯、光学取景器、LCD显示屏、图像数据存储扩展设备接口、图像数据传输接口、供电系统以及核心处理器等八个主要模块。数码相机的数据流向从图像传感器开始 ,止于图像数据的存储和传输。数据流的处理主要包括模数转换、光学黑电平钳位、针对镜头的边缘畸变的运算修正、坏像素处理、白平衡处理、伽马校正、色彩合成处理、边缘检测 (锐度检测 )和伪彩色检测 (伪彩色抑制 )、JPEG压缩和图像存储器等模块     

Quantitative vibration amplitude measurement with time-averaged digital speckle pattern interferometry

A new method of using time-averaged digital speckle pattern interferometry for the quantitative measurement of vibration amplitude was developed. Signal processing techniques especially the Hilbert transformation for quantitative evaluation of the Bessel fringes obtained in time-averaged digital speckle pattern interferometry were explored. The quadrature signal after Hilbert transformation is equivalent to a 90° phase-shifted interferogram for a monotonically increasing or decreasing phase function. An algorithm was developed for Bessel fringe contrast enhancement and phase extraction. The techniques were tested numerically and experimentally. Sub-fringe quantification of the time-averaged vibration fringes is realised with the proposed method. Compared with the commonly used phase shift method which requires a minimum of two images for image processing, this method requires only one fringe pattern for data extraction.     

不同温度均匀二半空间接触后产生的辐射场

 应用电磁线路中涨落耗散理论，推导了不同温度均匀二半空间接触后产生辐射场密度的公式。将此公式近似展开后，即得Grover和Urtiew所获得的表示式，不过多了一松弛项，该项如用非富里叶热传导理论推导，也是存在的。该结果和实验结果一致，不过这里的松驰时间可以应用介质性质进行计算。     

抽样调查中最佳测量次数的确定

现场抽样调查中，由于测量误差的存在，使得所测变量实测值的方差增大，通过增加每个体的测量次数可以控制测量误差，但这样每个体调查费用增大。本文对测量信度Ｒ，每个体测量次数ｍ与相应所需的样本含量ｎｍ、调查费用Ｔｎ的关系进行了探讨，并介绍了如何根据Ｒ，及每个体测量费用占其总费用构成比Ｃ，确定最佳测量次数ｍ值，以达到最佳控制调查费用的目的，这对我们在大型现场调查中进行经济效益分析具有重大的理论指导意义。     

惯性约束中子测温的误差研究

综合分析了ＩＣＦ（惯性约束）中子测温系统的误差与其参数的关系，这些参数包括靶核温度，探测的中子数、靶到探测器的距离、探测器的响应函数以及闪烁体厚度等，考虑到中子与探测器的相互作用，探测器的响应与靶的烧蚀过程，在此基础上提出了新的统计误差计算方法，该方法对于改善中子测温的相对误差并应用于闪烁体的设计具有重要意义。     

用于曲面精密检测的新型光纤三角传感器研究

基于光纤传感技术和三角测量方法，提出了一种用于曲面检测的新型光纤三角传感器。根据所设计的轮辐式接收光纤结构，可以在测量曲面与传感头间位移时，首先获取被测点处微面元的倾斜信息，以便对传感器测量值进行实时误差修正，从而解决了被测表面倾斜对坐标测量带来的影响。该传感器还能有效地消除环境光干扰、光源波动、表面反射率变化等对测量带来的影响。建立了传感器测量的数学模型。理论分析和初步的实验结果证明了系统的有效性和实用性。该传感器系统不稳定性好于0.3%，横向分辨率好于8μm，高度分辨率好于0.1μm。     

热声驱动系统中的压力测量

介绍了自制的用于热声驱动脉管制冷装置的计算机压力波数据采集系统。该系统由硅压电压力传感器、数据采集卡、PC机和基于 Labview软件的图形化用户界面 GUI( Graphical User In-terface)组成。试验证明 ,它具有结构简单、高效精确、操作简便等特点 ,在捕捉被测系统内的动态压力变化方面具有优势 ,不但能很好地满足热声驱动器的压力测量要求 ,而且亦可移植到任何类似的测量气体压力的场合     

分离流动的脉冲热线测量方法研究与应用

1引言分离流动经常出现在许多实际流动中，对流体机械和飞行器产生重大影响。但由于这种流动具有方向性，变化快，给测量带来了困难。到目前为止，主要有以下三种测量方法：山激光多普勒测速治（＊D川；（2）飞行热线（F坊In含＊。卜w让e）；O）脉冲热线技术（PulsedAVire。‘脉冲热线”比“激光多普勒测速仪”价格低一个数量级，操作简单，是一种比较理想的测量技术。其原理最初由Baner山提出，随后经过BradburyP］，Eaton问，Castro＊和Fernholz问等人不断发展与完善，目前国外正推广应用在分离流动的研究中。但在国内，尚不多见其…     

Quantitative evaluation of two-dimensional dynamic deformations using digital holography

An optical system for the parallel evaluation of in- and out-of-plane dynamical deformations will be described. A double pulse laser with pulse separation in the microsecond range is used for the investigations. Two separate interferograms of an object under test, in its undeformed and deformed state, are recorded in a few microseconds. The object is illuminated from two different directions and imaged onto a CCD sensor. This produces two sensitivity vectors. The reference beams have different directions in order to produce two directional spatial carriers. The Fourier method is used for quantitative evaluation, and the measurements along different sensitivity vectors are separated in the Fourier domain. The phases of the two interferograms are obtained from the complex amplitudes and the two dimensional deformation is calculated from the phases. Experimental results are presented.     

Linear calibration procedure for the phase-to-height relationship in phase measurement profilometry

Calibration of the relationship between height and phase is of uttermost importance to perform accurate 3D measurements in phase measurement profilometry. This work reports a different approach to this problem by first looking at the analytical expression for this relationship and determining the regime spanned by the fringe analysis method. The conclusions thus ascertained, amply justify confronting the analytical expression with a simple normalization procedure of the experimental data, with a remarkable matching between both results. In light of this, a linear calibration procedure with just one plane is proposed and verified experimentally.