Preparation and Characterization of the Hybrids Containing Silica Nanoparticles by Sol-Gel Crosslinking Process

The organic/inorganic hybrid nanomaterials containing silica nanoparticles are synthesized by sol-gel crosslinking process. The tetraethoxysilane (TEOS) and γ-aminopropyltriethoxylsilane as coupling agents are used as a precursor. The 2,4,6-tri [(2-epihydrin-3-bimethyl-ammonium)propyl]-1,3,5-triazine chloride (Tri-EBAC) as crosslinking agent is used to form covalent bonds among the inorganic nanoparticles. The chemical and morphological structures of the organic/inorganic hybrid are characterized with FTIR spectra, ²⁹Si-NMR, x-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and atomic force microscope (AFM). The results show that the organic/inorganic hybrid forms covalent bond between the inorganic nanoparticle and Tri-EBAC. The network organic/inorganic hybrid can form good film with even nanometer particles. The network organic/inorganic hybrids nanomaterial not only exhibits the thermal properties of inorganic compounds, but also exhibits the thermal properties of organic polymer.     

Studies on the Effect of Organic Solvents and Temperature on the Micellar Solution of Pentamethylene-1,5-bis(tetradecyldimethylammonium bromide) Gemini Surfactant

Effects of three organic solvents, viz. methyl cellosolve, acetonitrile, and formamide, on the micellization process of Gemini surfactant pentamethylene-1,5-bis(tetradecyldimethylammonium bromide) aqueous solutions, with the volume percentages of the organic solvents up to 50%, have been investigated conductometrically. The studies were made at different temperatures and the data were used to find out different micellization parameters. From the study, it was observed that, although an increment in the amount of the organic solvents delays the micellization, the increase in the critical micelle concentration (cmc) is comparatively less below 20%(v/v) showing the predominance of water character in the bulk phase at lower compositions of the organic solvents. Applying equilibrium model for micelle formation, various thermodynamic parameters were also calculated from the temperature dependence of the cmc values and the results show that the micellization process becomes less spontaneous as the volume % of the organic solvent increases in the system due to the action of water-organic solvent mixed media as better solvent than pure water (solvophobic effect) for the studied Gemini molecules.     

Analysis of Crude Oils by Frequency Domain Spectroscopy—Effect of Composition and Physical Properties on Conductivity and Dielectric Response

The dielectric properties and the composition of fourteen light to heavy crude oils have been analyzed. Frequency domain spectroscopy (FDS) has been used in order to determine their dielectric response in the frequency range 0.01 to 1000 Hz. For all the crude oils, over the whole frequency range under study, dielectric loss, ?″, shows a linear dependence of frequency indicating a pure direct current (DC) conductivity. As temperature is gradually increased, the dielectric loss, ?″, increases as well, showing a strong temperature dependence. The storage modulus, ?′, shows an explicit behaviour at low frequency that could be due to adsorption of oil components onto the electrodes. We tried to correlate some physical and chemical properties (density, viscosity, SARA, TAN, water content) of the studied crude oils with their conductivity measured at various temperatures. No correlation was found and different hypothesis are suggested by the authors to explain this phenomenon.     

Nonlinear current-voltage characteristics of conductive polyethylene composites with carbon black filled pet microfibrils

Current-voltage electrical behavior of in situ microfibrillar carbon black (CB)/poly(ethylene terephthalate) (PET)/polyethylene (PE) (m-CB/PET/PE) composites with various CB concentrations at ambient temperatures was studied under a direct-current electric field. The current-voltage (I-V) curves exhibited nonlinearity beyond a critical value of voltage. The dynamic random resistor network (DRRN) model was adopted to semi-qualitatively explain the nonlinear conduction behavior of m-CB/PET/PE composites. Macroscopic nonlinearity originated from the interfacial interactions between CB/PET micro fibrils and additional conduction channels. Combined with the special conductive networks, an illustration was proposed to interpret the nonlinear I-V characteristics by a field emission or tunneling mechanism between CB particles in the CB/PET microfibers intersections.     

The liquid crystal properties of symmetric and non-symmetric dimers based on the azobenzene mesogenic group

A novel system of symmetric and non-symmetric dimers containing azobenzene groups has been synthesized and studied in an attempt to understand further the molecular origins of the intercalated smectic phases. For the non-symmetric dimers, the lack of symmetry was derived solely from the differences in length of the two terminal alkyl chains. Both the spacer and terminal chain lengths were varied. The spacer length was found to exert a profound influence on the clearing temperatures of these materials and a large odd-even effect was observed for the series. The smectic A phase stability was observed to increase with the terminal chain length, yet decrease with increasing spacer length. X-ray diffraction has revealed the structure of the smectic A phase of both the symmetric and non-symmetric azobenzene dimers to be of the monolayer type and not intercalated. The existence of the intercalated phase has previously been explained in terms of either a charge-transfer interaction, or by an electrostatic quadrupolar interaction. However, it has been thought that it may also be the result of an excluded volume or space filling constraint. For the non-symmetric liquid crystal dimers described here, a charge-transfer interaction should be minimal, as should the stabilization from the quadrupolar interaction between the two mesogens. However, it appears that some sort of specific interaction is required to stabilize the intercalated structure.     

Electro-optic effect,propagation loss,and switching speed in polymers containing nano-sized droplets of liquid crystal

Polymers containing droplets of liquid crystal smaller than 100 nm, which have good transparency and easily form films, were prepared under various conditions to evaluate their potential as electro-optic materials for waveguide-type devices. By varying the liquid crystal concentration and the strength of the UV irradiation causing photo-induced phase separation of the droplets, we were able to control the droplet size and density. We have clarified how the birefringence generated in an applied electric field, switching speed, and optical loss of light propagating in the film depend on droplet size and density. Polymer materials having a large electro-optic effect (δn = 0.001 at 8 V μm^-1), low propagation loss (~2.5 dB cm^-1), and fast response time (~10 μs) have been developed.     

Structure and photoconductive behaviour of a sanidic liquid crystal

A series of [1]benzothieno[3,2-b][1]benzothiophene-2,7-dicarboxylate derivatives consisting of a flat, conjugated aromatic moiety containing sulphur hetero-atoms and substituted by terminal chains - ethyl, decyl, Z-4-decenyl or 2-(2-butoxyethoxy)ethyl - has been synthesized. These materials exhibit a smectic liquid crystalline phase, the stability of which was found to be strongly dependent on the length and the nature of the terminal chains. In the mesophase, the molecular arrangement within the smectic layer is characterized by a local stacking of the rigid parts similar to that found in discotic columnar systems. Finally, clear photoconductive behaviour was found in mechanically aligned samples of these liquid crystals.     

Enhanced dielectric and electro-optical properties of a newly synthesised ferroelectric liquid crystal material by doping gold nanoparticle-decorated multiwalled carbon nanotubes

In this article, a newly synthesised ferroelectric liquid crystal (FLC) material, namely LAHS 22, has been characterised. The characterisation of the FLC material has been performed using dielectric relaxation spectroscopy, differential scanning calorimetry and polarisation optical microscopy. We observed an enhancement in the dielectric and electro-optical properties of the FLC material by incorporating gold nanoparticles (GNPs)-decorated multiwalled carbon nanotubes (MWCNTs). The GNPs-decorated MWCNTs cause an increment in dielectric dispersion (up to kHz), absorption, spontaneous polarisation and rotational viscosity of the FLC material. The pure and GNPs-decorated MWCNTs doped FLC cells were analysed by means of various dielectric spectroscopic and optical measurements. The observed enhancement in the dielectric and electro-optical properties of the FLC material has also been studied with concentration of GNPs-decorated MWCNTs in FLC material. The GNPs-decorated MWCNTs/FLC composites are not only of fundamental importance, but also useful materials for device applications such as liquid crystal displays and memory devices.