Chemical modification of polymer surfaces: a review

The main approaches that have been taken to chemically modify polymer surfaces are introduced and reviewed. These are wet chemical oxidation, plasma treatment, classical organic chemistry, and attachment of polymer chains. The extent to which each of these approaches can produce the specific modifications desired is discussed, and any unwanted effects that commonly occur are cited. Finally, the need for using several methods of surface analysis in concert to obtain adequate surface characterization is described.     

Modification of silica gel with diethylamino group by novel reaction and its characterization

1,3,5,7-Tetramethylcyclotetrasiloxane (H₄) was deposited on silica gel at 80°C by utilizing a chemical vapor deposition (CVD) method, where it was catalytically polymerized to form a surface coating of polymethylsiloxane (PMS). Treated silica gel (PMS-Si) increased in weight up to a plateau level, and there was no further increase with increasing reaction time. The film of PMS was partially cross linked; typical values of crosslinking ratio and film thickness were 2% and 0.6 nm, respectively. An anionic ion exchanger containing diethylamino groups was synthesized from PMS-Si by hydrosilylation of allyl glycidyl ether followed by treatment with diethylamine. Its structure was confirmed by¹³C and²⁹Si CP/MAS NMR spectroscopy and FT-IR spectrophotometry. Characterization of silica gel (DEA-Si) modified with diethylamino group was evaluated by a packing of the column for liquid chromatography. As a mixture of five nucleotides was completely separated, it was recognized that DEA-Si was operated by ion exchange action. Because the surface of the silica gel was covered with hydrophobic PMS, the peak heights and retention times did not change after washing of the column with alkaline solution.     

功能性超薄有序分子沉积膜的制备及其结构研究

1991年G.Decher等首次探讨了阴阳离子与聚电解质交替沉积制备有机超薄膜的方法。我们在完善成膜技术和发展成膜基质的基础上,详细研究了其成膜过程与膜的结构,并定义这种新的自组装超薄有序膜为分子沉积膜——MD膜。MD膜是利用阴阳离子的静电吸附反应特性,通过相反离子体系的交替分子沉积制备的层状有序自组装多层超薄膜。需要指出的是,分子沉积既是有机超薄膜的制备技术,本身又是一种自组装超薄有序膜。MD膜制备工艺简单,热稳定性和长期稳定性好,不受基体形状与面积限制。     

Pure Organic Phase Phenol Biosensor Based on Tyrosinase Entrapped in a Vapor Deposited Titania Sol‐Gel Membrane

A novel amperometric biosensor was constructed for the determination of phenols in pure organic phase. This biosensor was fabricated by immobilizing tyrosinase in a titania sol‐gel membrane which was obtained with a vapor deposition method. This method was facile and avoided the calcination step needed in conventional titania sol‐gel process. The titania sol‐gel membrane could effectively retain the essential water layer around the enzyme molecule needed for maintaining its activity in organic phase. The experimental parameters such as solvent and operating potential were optimized. At ?100 mV this biosensor showed a good amperometric response to phenols in pure chloroform without any mediator and rehydration of the enzyme. For catechol determination the sensor exhibited a fast response of less than 5 seconds. The sensitivity of different phenols was as follows: catechol > phenol > p‐cresol. Additionally, the apparent Michaelis‐Menten constants of the encapsulated tyrosinase to catechol, phenol and p‐cresol were found to be 0.15±0.003, 0.17±0.008 and 0.21±0.004 mM, respectively. The biosensor had also good reproducibility and stability. This work provided a promising platform for the construction of pure organic phase biosensors and the determination of substrates with poor water solubility.     

Formation of Ad-Layers and Clusters on Condensation of Metal Vapors on Solid Surfaces

Synthesis of organometallic materials can be accomplished in many cases by cocondensation of metal atoms and organic molecules at low temperatures. The reaction kinetics is determined by the competition between metal cluster growth and formation of the organometallic compound. Interesting compounds may contain one or more metal atoms; the latter type could be obtained by reaction between a cluster containing the desired number of metal atoms and an organic molecule. A precise knowledge of the events occurring on condensation of metal atoms and cluster formation can therefore be of value in the control of chemical synthesis. These phenomena have been investigated in connection with the study of the growth of thin metallic films, both experimentally and theoretically. Direct observation of the formation of very small clusters is difficult. The good agreement between experimental results and recent calculations for the development of large clusters, however, allows reliable theoretical conclusions for the first stages of adsorption and cluster formation. The present contribution describes experimental work on film growth and relevant theoretical concepts, and an attempt is made to develop applications to organometallic synthesis.     

Glass capillary gas chromatography of amino acid enantiomers

Glass capillaries coated with Chirasil-Val, a chirally functionalised polysiloxane, are capable in principle of resolving all protein amino-acid enantiomers in a single run and within a short analysis time, thus allowing for example the quantitative amino acid determination by enantiomer labelling. The elution characteristics of the individual amino acids however are also dependent upon the chemical nature of the capillary wall surface, and a surface pretreatment is found to be necessary if all protein amino acids are to be analysed. Of the various methods of pretreatment tested, etching of borosilicate glass with gaseous HCl followed by deposition of colloidal silicic acid is considered to be the most suitable.     

Underpotential deposition studies of copper on glassy carbon

Studies on the deposition and dissolution of copper from 0·5 M sulphuric acid solutions onto glassy carbon (GC) using potential sweep techniques indicated that an additional peak occurs at higher positive potentials than the bulk stripping peak. This peak is identified as due to the stripping of underpotential deposited (UPD) copper. Results of investigations on the effect of sweep rate, deposition potential and time of deposition on the peak characteristics of UPD and bulk deposited copper are also reported.     

Polyelectrolyte microcapsules templated on poly(styrene sulfonate)-doped CaCO3 particles for loading and sustained release of daunorubicin and doxorubicin

A strategy to incorporate and release anti-cancer drugs of daunorubicin (DNR) and doxorubicin (DOX) in preformed microcapsules is introduced, which is based on charge interaction mechanism. Oppositely charged poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) were assembled onto PSS doped-CaCO₃ colloidal particles in a layer-by-layer manner to yield core-shell particles. After removal of the carbonate cores, hollow microcapsules with entrapped PSS were fabricated, which showed spontaneous loading ability of positively charged DNR and DOX. The drug loading was confirmed quantitatively by observations under confocal laser scanning microscopy, transmission electron microscopy and scanning force microscopy. Quantification of the drug loading was performed under different conditions, revealing that a larger amount of drugs could be incorporated at higher drug feeding concentrations and higher salt concentrations. However, putting additional polyelectrolyte layers on the microcapsules after core removal resulted in weaker drug loading efficiency. The drug release behaviors from the microcapsules with different layer numbers were studied too, revealing a diffusion controlled release mechanism at the initial stage (4 h).     

Molecular Beam Mass Spectrometry System for Characterization of Thermal Plasma Chemical Vapor Deposition

A molecular beam mass spectrometry system for in situ measurement of the concentration of gas phase species including radicals impinging on a substrate during thermal plasma chemical vapor deposition (TPCVD) has been designed and constructed. Dynamically controlled substrate temperature was achieved using a variable thermal contact resistance method via a backside flow of an argon/helium mixture. A high quality molecular beam with beamtobackground signal greater than 20 was obtained under film growth conditions by sampling through a small nozzle (75 m) in the center of the substrate. Mass discrimination effects were accounted for in order to quantify the species measurements. We demonstrate that this system has a minimum detection limit of under 100 ppb. Quantitative measurements of hydrocarbon species (H, H₂, C, CH₃, CH₄, C₂H₂, C₂H₄) using Ar/H₂/CH₄ mixtures and silicon species (Si, SiH, SiH₂, SiCl, SiCl₂, Cl, HCl) using Ar/H₂/SiCl₄ mixtures were obtained under thermal plasma chemical vapor deposition conditions.     

有机小分子染料和聚阳离子分子超薄膜的制备及其摩擦学性能研究

制备了以有机小分子染料酸性红 1 8为阴离子、以聚烯丙基氯化铵和聚乙烯亚胺为聚阳离子的分子沉积膜 ,用紫外可见分光光度计、接触角测定仪和椭圆偏振光测厚仪对所制备的超薄膜进行了表征 .用DF PM型动 静摩擦系数精密测定装置考察了超薄膜的摩擦学性能 ,采用扫描电子显微镜对薄膜的磨痕表面进行了观察 .结果表明 ,所制备的超薄复合沉积膜具有良好的减摩和耐磨性能