Planar and tubular perovskite-type membrane reactors for the partial oxidation of methane to syngas

Dense planar and tubular oxygen separation membranes of La_0.6Ca_0.4Fe_0.75Co_0.25O_3– were investigated as reactors for the partial oxidation (POX) of methane to syngas. Their permeation properties were measured in an air/argon pO₂ gradient as a function of temperature. At 900 °C, the oxygen flux through a 1.26-mm-thick membrane was 0.075 mol/cm²·s and through a 0.25-mm-thick tube, 0.24 mol/cm²·s.For the POX measurements, a catalyst was added to the membrane and methane was introduced on the argon side. This resulted in a gradual increase of the oxygen flux with increasing concentration of methane, reaching 2 mol/cm²·s at 900 °C with pure methane. For the planar reactor, the CO selectivity reached 99% and the CH₄ conversion 75% at 918 °C with pure methane. For the tubular reactor, the CO selectivity and CH₄ conversion were 83 and 99%, respectively, under the same conditions. After 1,400 h of operation in a tubular POX reactor, the membrane was examined revealing phase demixing and local decomposition.Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

Novel perturbation expansion for the Langevin equation

We discuss the randomly driven systemdx/dt= -W(x) +f(t), wheref(t) is a Gaussian random function or stirring force withf(t)f(t)=2(t–t), andW(x) is of the formgx ¹⁺². The parameter is a measure of the nonlinearity of the equation. We show how to obtain the correlation functionsx(t)f(t)···x(t( n)) _f as a power series in. We obtain three terms in the expansion and show how to use Padé approximants to analytically continue the answer in the variable. By using scaling relations, we show how to get a uniform approximation to the equal-time correlation functions valid for allg and.     

Development of B‐doped Si multiple delta‐layer reference materials for SIMS profiling

B‐doped Si multiple delta‐layers (MDL) were developed as certified reference materials (CRM) for secondary ion mass spectrometry (SIMS) depth profiling analysis. Two CRMs with different delta‐layer spacing were grown by ion beam sputter deposition (IBSD). The nominal spacing of the MDL for shallow junction analysis is 10 nm and that for high energy SIMS is 50 nm. The total thickness of the film was certified by high resolution transmission electron microscopy (HR‐TEM). The B‐doped Si MDLs can be used to evaluate SIMS depth resolution and to calibrate the depth scale. A consistency check of the calibration of stylus profilometers for measurement of sputter depth is another possible application. The crater depths measured by a stylus profilometer showed a good linear relationship with the thickness measured from SIMS profiling using the calibrated film thickness for depth scale calibration. The sputtering rate of the amorphous Si thin film grown by sputter deposition was found to be the same as that of the crystalline Si substrate, which means that the sputtering rate measured with these CRMs can be applied to a real analysis of crystalline Si. Copyright © 2005 John Wiley & Sons, Ltd.     

Nondimensional frequency scaling of aerodynamically-tensioned membranes

Membrane wings have applications that involve low Reynolds number flyers such as micro air vehicles. The time-averaged and time-dependent deformations of the membrane affect the aerodynamic characteristics of the wing, primarily in the region beyond the maximum aerodynamic efficiency of the wing. This paper investigates an appropriate nondimensional vibration frequency scaling of a spanwise tensioned membrane with free (unattached) leading and trailing edges at low Reynolds numbers relative to nondimensional aeroelastic parameters. Silicone rubber membranes with varying spanwise pre-tension, aerodynamic tension (due to wing angle-of-attack and flow dynamic pressure), modulus of elasticity, span, and thickness are studied. Experimental results are compared to a proposed scaling that simplifies the aerodynamic loading as a uniform pressure distribution acting on the membrane. Data is further compared and discussed relative to previous published results of membrane wings with finite wing spans (three-dimensional flow) and fixed (rigid) leading edges.     

D-admissible hybrid control of a class of singular systems

This paper mainly studies the problem of designing a hybrid state feedback D-admissible controller for a class of linear and nonlinear singular systems. Based on the relationship between singular discrete systems and singular delta operator systems, several necessary and sufficient conditions for a linear singular delta operator system to be D-admissible (i.e. regular, causal and all finite poles lie in a prescribed circular region) with different representations are derived. Then, the existence conditions and explicit expressions of a desirable D-admissible controller are given by means of matrix inequalities and strict linear matrix inequalities, respectively. We further extend the obtained results to singular delta operator systems with Lipschitz nonlinear perturbations, and the design methods of hybrid controller are presented for the nonlinear case as well. Finally, numerical examples as well as simulations are provided to illustrate the effectiveness of the theoretical outcomes obtained in the paper.     

Experimental shift allowance in the deconvolution of SIMS depth profiles

We study the deconvolution of the secondary ion mass spectrometry (SIMS) depth profiles of silicon and gallium arsenide structures with doped thin layers. Special attention is paid to allowance for the instrumental shift of experimental SIMS depth profiles. This effect is taken into account by using Hofmann's mixing‐roughness‐information depth model to determine the depth resolution function. The ill‐posed inverse problem is solved in the Fourier space using the Tikhonov regularization method. The proposed deconvolution algorithm has been tested on various simulated and real structures. It is shown that the algorithm can improve the SIMS depth profiling relevancy and depth resolution. The implemented shift allowance method avoids significant systematic errors of determination of the near‐surface delta‐doped layer position. Copyright © 2013 John Wiley & Sons, Ltd.     

Interactions of delta shock waves for the relativistic Chaplygin Euler equations with split delta functions

In this article, we are concerned with the interactions of delta shock waves with contact discontinuities for the relativistic Euler equations for Chaplygin gas by using split delta functions method. The solutions are obtained constructively and globally when the initial data consists of three piecewise constant states. The global structure and large time‐asymptotic behaviors of the solutions are analyzed case by case. During the process of the interaction, the strengths of delta shock waves are computed completely. Moreover, it can be found that the Riemann solutions are stable for such small perturbations with special initial data by letting perturbed parameter ε tends to zero. Copyright © 2014 John Wiley & Sons, Ltd.     

Novel microwave plasma‐assisted CVD reactor for diamond delta doping

We report on building a novel chemical vapor deposition (CVD) reactor for diamond delta‐doping. The main features of our reactor are: a) the use of rapid gas switching system, (b) the reactor design providing the laminar gas flow. These features provide the creation of ultra‐sharp interfaces between doped and undoped material and minimize the prolonged ”tails” formation in the doping profile. It is proved by optical emission spectroscopy that gas switching time is not more than 10 seconds. Using the novel reactor we have grown the nanometer‐thin layers of boron doped diamond. The FWHM of boron concentration profile is about 2 nm which is proved by SIMS. It is shown that the both single delta‐layer and multiple delta‐layers could be grown using the novel CVD reactor. In principle, the reactor could be used for diamond delta doping with other dopants, like nitrogen, phosphorus etc. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

SEDIMENTO-DYNAMIC CHARACTERISTICS OF THE HUANGHE (YELLOW) RIVER SUBAQUEOUS DELTA

The runoff of the Huanghe contains a great amount of suspended load and forms the high-density underflows (hyperpycnal currents) at the river mouth. The sediments over the subaqneous delta are mainly transported by the underflow. The sediment texture gradually get fining seawards, which relates to the attenuation of the hyperpycnal currents and hypopycnal plumes. Being hydraulically equivalent to the medlum-silt-sized quartz, which is the dominant component in the sediments, the clastic mica concentrates on the delta. The maximum thickness of the subaqueous delta is about 16m and the period of accumulation lasted from 12 to 16 years, therefore its sedimentary rate ranges from 110 to 130 cm/a.     

液相色谱-同位素比质谱法同时测定葡萄酒中甘油和乙醇的δ13C值

采用液相色谱-同位素比质谱(LC-IRMS)技术建立了同时测定葡萄酒中甘油和乙醇δ13C值的分析方法。优化了葡萄酒中影响甘油和乙醇色谱分离的条件。方法的精密度和准确度分别为0.15‰~0.26‰和0.11‰~0.28‰。对40个葡萄酒样品进行了测定,甘油和乙醇的δ13 C值分别为-26.87‰~-32.96‰、-24.06‰~-28.29‰,两者具有较强的相关性(R=0.82)。该方法不需要复杂的样品预处理,在相同条件下同时测定甘油和乙醇的δ13C值,较传统方法简单、快速。