Intermolecular Vibrational Relaxation in Mixtures of Excited Benzophenone and Anthraquinone Molecules with Water Vapor

The intermolecular vibrational energy transfer from triplet molecules of benzophenone and anthraquinone to H₂O molecules has been investigated. To determine the rates of establishment of vibrational (V-V) and thermal (V-T) equilibrium in a vibrational quasi-continuum of mixed singlet-triplet levels, the dependences of the decay rates and intensities of the fast and slow components of delayed fluorescence on the H₂O vapor pressure have been investigated. For V-V relaxation, the efficiencies ₁ and the mean energies E transferred per collision in mixtures with H₂O and other polyatomic foreign gases have been compared. It has been established that the efficiencies ₁ for quasi-resonant vibrational energy transfer (V-V) from benzophenone and anthraquinone to H₂O are an order of magnitude lower than the gas-kinetic ones and lower than those obtained under the same experimental conditions for such foreign gases as C₅H₁₂, SF₆, and CCl₄, and decrease with increasing temperature in the 433–513 K range. It has been concluded that the mechanism of V-V relaxation in mixtures with H₂O are determined by long-range attractive forces. In mixtures with H₂O, no acceleration of V-T relaxation due to the formation of hydrogen bonds has been revealed. The low-efficiency thermalization process (V-T relaxation) is controlled by short-range repulsive forces, and the differences between the intensities ₂ for mixtures of benzophenone and anthraquinone with H₂O and other polyatomic gases are determined by the change in the reduced mass of interacting molecules.     

Twisted penta‐Carbazole/Benzophenone Hybrid Compound as Multifunctional Organic Host,Dopant or Non‐doped Emitter for Highly Efficient Solution‐Processed Delayed Fluorescence OLEDs

A new multi‐functional penta‐carbazole/benzophenone hybrid compound 5CzBP was designed and synthesized through a simple one‐step catalyst‐free C—N coupling reaction by using 2,3,4,5,6‐pentafluorobenzophenone and carbazole as starting materials. 5CzBP is very soluble in tetrahydrofuran (THF), which brings an environmentally friendly device fabrication for solution‐processed OLEDs instead of most widely used chlorinated solvents when 5CzBP is employed as the bulk‐phase of organic host or non‐doped emitter in the emissive layer. 5CzBP exhibits thermally activated delayed fluorescence (TADF) characteristic with relatively high triplet energy of 2.60 eV and a low ΔE_ST of 0.01 eV. By using the new TADF material as organic host for another green TADF emitter, maximum external quantum efficiency (EQE) of 12.5% has been achieved in simple solution‐processed OLED device. Besides, a maximum EQE of 8.9% and 5.7% was further obtained in TADF devices based on 5CzBP as dopant and non‐doped emitter, respectively. The simultaneously acting as efficient TADF host and non‐doped TADF emitter provides the potential guidance of the future simple single‐layer two‐color white OLEDs based on low‐cost pure organic TADF materials.     

Constructing Charge‐Transfer Excited States Based on Frontier Molecular Orbital Engineering: Narrowband Green Electroluminescence with High Color Purity and Efficiency

The design and synthesis of organic materials with a narrow emission band in the longer wavelength region beyond 510 nm remain a great challenge. For constructing narrowband green emitters, we propose a unique molecular design strategy based on frontier molecular orbital engineering (FMOE), which can integrate the advantages of a twisted donor–acceptor (D‐A) structure and a multiple resonance (MR) delayed fluorescence skeleton. Attaching an auxiliary donor to a MR skeleton leads to a novel molecule with twisted D‐A and MR structure characteristics. Importantly, a remarkable red‐shift of the emission maximum and a narrowband spectrum are achieved simultaneously. The target molecule has been employed as an emitter to fabricate green organic light‐emitting diodes (OLEDs) with Commission Internationale de L'Eclairage (CIE) coordinates of (0.23, 0.69) and a maximum external quantum efficiency (EQE) of 27.0 %.     

Integrating Time-Resolved Imaging Information by Single-Luminophore Dual Thermally Activated Delayed Fluorescence

The fact that the lifetime of photoluminescence is often difficult to access because of the weakness of the emission signals, seriously limits the possibility to gain local bioimaging information in time-resolved luminescence probing. We aim to provide a solution to this problem by creating a general photophysical strategy based on the use of molecular probes designed for single-luminophore dual thermally activated delayed fluorescence (TADF). The structural and conformational design makes the dual TADF strong in both diluted solution and in an aggregated state, thereby reducing sensitivity to oxygen quenching and enabling a unique dual-channel time-resolved imaging capability. As the two TADF signals show mutual complementarity during probing, a dual-channel means that lifetime mapping is established to reduce the time-resolved imaging distortion by 30–40 %. Consequently, the leading intracellular local imaging information is serialized and integrated, which allows comparison to any single time-resolved signal, and leads to a significant improvement of the probing capacity.     

高效溶液法制备延迟荧光电致发光器件研究

本文以2-[对-N,N-二苯基氨基-苯基]-S-二氧硫杂蒽酮(TXO-TPA)为发光材料, 4,4',4"-三(9-咔唑基)三苯胺(TCTA) 为主体材料, 通过溶液法与真空蒸镀相结合的工艺,制备了高效延迟荧光型电致发光器件。为了考察不同电子传输材料对器件性能的影响,分别选取TmPyPB、TPBI、BCP、Alq₃作为电子传输层制备器件,并对器件的性能进行系统的研究。结果表明:由于1,3,5-三(1-苯基-1H-苯并咪唑-2-基)苯(TPBI)具有合适的HOMO/LUMO能级、高的电子迁移率以及高的三重态能级,利于电子的传输和激子的阻挡,以其为电子传输层的器件显示出最佳的性能,器件的开启电压低至3.6 V,电流效率达到16.2 cd/A,最大的EQE达到5.97%。     

吡哌酸的固体表面-延迟荧光法研究

研究了吡哌酸(PPA)的同体表面-延迟荧光特征,实验表明Be(Ⅱ)、Mg(Ⅱ)、Ca(Ⅱ)、Sr(Ⅱ)、Ba(Ⅱ)及Zn(Ⅱ)、Cd(Ⅱ)、La(Ⅲ)等无机盐能显著增强PPA的固体表面-延迟荧光(SS-DF).pH值对PPA的SS-DF有显著影响。寿命测量结果表明,在固体表面PPA是以双指数衰减的,同时测量了PPA的低温光谱,在本文选择的条件下,PPA分析曲线的线性范围为1.8～1800ng/斑点。     

多共振热激活延迟荧光过程的理论研究

本工作借助第一性原理和动力学演化,系统地研究了四个叔丁基-咔唑及吩噻嗪取代的硼-氮化合物(BCz-BN、2PTZ-BN、Cz-PTZ-BN和2Cz-PTZ-BN)的多共振热激活延迟荧光的高效发光机制.结果表明上述分子T₁与T₂间的内转换速率远大于其它辐射与非辐射速率,同时T₂到S₁的反向系间窜越速率也高于T₁到S₁的反向系间窜越速率,因此其多共振热激活延迟荧光过程应遵循T₁→T₂→S₁→S₀的路径.进一步动力学演化表明,T₁与T₂之间的内转换主要发生在演化初期,随着时间的推移,能量逐渐由T₂向S₁转移,并最终在S₁完成荧光发射.上述研究揭示了多共振延迟荧光的微观本质,为未来设计及合成新的多共振热激活延迟荧光分子提供了理论依据.     

基于铜金属有机配合物的热活化延迟荧光材料

具有热活化延迟荧光(thermally activated delayed fluorescence, TADF)特性的配合物可以同时利用单重态和三重态激子,因此发光量子效率较高,近年来受到广大科研工作者的关注。特别是铜金属有机配合物,最低单重态和最低三重态的能量差较小,又可以通过不同配体或取代基进行调节,所以具有较好TADF性能。本文根据配位原子的类型,汇总和分析了近5年具有TADF性质的铜配合物的结构特点和发光性能,并简要讨论了其在有机发光二极管(organic light-emitting diodes,OLEDs)中的潜在应用。     

热激活延迟荧光材料的光物理行为及性能预测

热激活延迟荧光(Thermally activated delayed fluorescence, TADF)材料由于三线态激子可通过反系间窜越(Reverse intersystem crossing, RISC)转换为单线态激子,在有机发光二极管(Organic light-emitting diodes, OLEDs)中理论上可达到100%的激子利用率而被广泛关注。但实验上开发设计高性能TADF材料较为复杂且研究周期较长,理论研究可以从本质上建立材料结构-性能的关系,预测材料的性质并提供一定的分子设计策略。本文围绕高性能TADF材料的开发,从发光原理出发,系统阐述了分子的设计策略及光物理参数如材料单-三线态能级差(Single-triplet energy gap,ΔE_ST)、系间/反系间窜越速率、吸收/发射光谱、辐射/非辐射速率等的计算原理、计算方法和研究进展。最后我们探讨了TADF材料理论研究面临的机遇和挑战,通过对TADF材料的理论研究综述和研究前景的展望,期待吸引更多的研究工作者,推动该领域的发展和突破。     

Acridone-Based Host Materials for Green Phosphorescent and Thermally Activated Delayed Fluorescent OLEDs with Low-Efficiency Roll-Offs

By linking the carbazole unit to the nitrogen atom of acridone through phenyl or pyridyl, two compounds, named 10-(4-(9H-carbazol-9-yl)phenyl)acridin-9(10H)-one (AC-Ph-Cz) and 10-(5-(9H-carbazol-9-yl)pyridin-2-yl)acridin-9(10H)-one (AC-Py-Cz) were designed and synthesized. These two materials, characterized with highly twisted and rigid structure, good thermal stability, and balanced carrier-transporting properties, were employed as host materials for green phosphorescent and thermally activated delayed fluorescent organic light-emitting diodes (OLEDs). The carbazole group, despite its small contribution to the highest occupied molecular orbitals (HOMOs) of these two materials, plays an essential role as an intramolecular host in energy delivering and improving the hole transporting ability of these two hosts. The incorporation of the electron-deficient pyridyl group as a linking group slightly improves the electron transporting capability of AC-Py-Cz. The green phosphorescent OLED (PhOLED) based on AC-Py-Cz exhibited excellent device performance with a turn-on voltage of 2.5 V, a maximum power efficiency and an external quantum efficiency (η_ext) of 89.8 lm W⁻¹ and 25.2 %, respectively, benefitting from the better charge-balancing ability of AC-Py-Cz host due to the presence of the pyridyl bridge. More importantly, all the devices based on these two hosts showed low efficiency roll-off at high brightness due to the suppressed non-radiative transition in the emitting layer. In particular, the AC-Py-Cz-hosted green PhOLED exhibited an efficiency roll-off of 1.6 % from the maximum next at a high brightness of 1000 cd m⁻² and a roll-off of 15.9 % at an extremely high brightness of 10000 cd m⁻². This study manifests that acridone-based host materials have great potential in fabricating OLEDs with low efficiency roll-off.