JAVA多线程技术在图像处理中的应用

使用JAVA多线程技术对复杂图像下载并进行处理和控制,从而达到图像显示的动态性和交互性效果,并给出了一个具体的应用实例。     

增材制造八角桁架点阵结构材料的力学行为

基于激光选区熔化增材制造技术(SLM), 以GP1不锈钢为母材, 制备4种相对密度的八角桁架点阵结构试样, 开展了准静态单轴压缩和直接撞击式霍普金森压杆实验, 并结合显式有限元计算模拟, 研究了相对密度和加载速率对八角桁架点阵结构试样在力学响应、变形模式和吸能特性的影响. 结果显示: (1)相对密度是影响八角桁架点阵结构材料力学响应的关键参数, 屈服载荷随着相对密度基本呈线性增长, 并且表现出明显的应变率强化效应; (2)在准静态压缩下, 随着相对密度增大, 八角桁架点阵结构的变形模式由弯扭屈曲模式逐渐向稳定屈服模式转变; 而在冲击压缩下, 八角桁架点阵结构的变形模式随着冲击速度由对称稳定变形模式向非对称逐渐压垮模式转变; (3)八角桁架点阵结构总吸能随着相对密度线性增大, 而比吸能随着相对密度呈现双线性变化, 在相对密度30%处出现拐折, 当相对密度高于30%后, 比吸能增大缓慢; (4)与准静态加载相比, 冲击加载下八角桁架点阵结构的总吸能和比吸能都显著提升.     

冲击荷载下C型G550冷弯钢的断裂机理研究

以C型G550薄壁冷弯钢构件为研究对象, 通过材料在不同应变率下的拉伸实验和数值模拟数据得到Johnson-Cook (J-C)本构模型和Johnson-Cook失效模型参数. 通过Abaqus软件模拟了不同冲击荷载作用下C型冷弯钢构件撕裂破坏的全过程, 利用落锤装置轴向冲击试验进行对比, 其实验结果与有限元数值模拟结果有良好的一致性. 此外, 对冲击试样撕裂断口进行微观形貌分析, 得到构件的断裂机理. 结果表明: 随着冲击速度的提高, 冲击力对构件的加载时间增加, 构件需要较大的塑性变形来吸收冲击能量; 冲击速度越高, 裂纹扩展功所占吸收冲击能量的比例越大, 显示出高速下裂纹扩展的能力越好; 冲击速度较高时, 以脆性断裂为主, 断口出现解理面, 甚至在高速变形时发生了绝热剪切破坏.     

多层绝热材料规模化干燥处理时温度场的测试与分析

对大批量处理多层绝热材料的大型专用干燥箱满负荷运行时工作区域的温度场进行测试,通过温度分布和温度场均匀性的分析,得出了最高温度发生点的位置与成因以及影响温度场均匀性的主要因素,并对温度的控制方法、多层材料的布置方案和干燥设备的改进提出了建议。     

潜体在非均质流体中的平衡位置与平衡过程

以探空气球为例,讨论潜体在非均质流体中的平衡位置与平衡过程.     

Nonequilibrium thermodynamics and fluctuation relations for small systems

In this review, we give a retrospect of the recent progress in nonequilibrium statistical mechanics and thermodynamics in small dynamical systems. For systems with only a few number of particles, fluctuations and nonlinearity become significant and contribute to the nonequilibrium behaviors of the systems, hence the statistical properties and thermodynamics should be carefully studied. We review recent developments of this topic by starting from the Gallavotti–Cohen fluctuation theorem, and then to the Evans–Searles transient fluctuation theorem, Jarzynski free-energy equality, and the Crooks fluctuation relation. We also investigate the nonequilibrium free energy theorem for trajectories involving changes of the heat bath temperature and propose a generalized free-energy relation. It should be noticed that the non-Markovian property of the heat bath may lead to the violation of the free-energy relation.     

Controlling the surface buckling wrinkles by patterning the material system of hard-nano-film/soft-matter-substrate

Wrinkling and buckling of nano-films on the compliant substrate are always induced due to thermal deformation mismatch.This paper proposes effective means to control the surface wrinkling of thin film on the compliant substrate,which exploits the curvatures of the curve cracks designed on the stiff film.The procedures of the method are summarized as:1)curve patterns are fabricated on the surface of PDMS(Polydimethylsiloxane)substrate and then the aluminum film with the thickness of several hundred nano-meters is deposited on the substrate;2)the curve patterns are transferred onto the aluminum film and lead to cracking of the film along the curves.The cracking redistributes the stress in the compressed film on the substrate;3)on the concave side of the curve,the wrinkling of the film surface is suppressed to be identified as shielding effect and on the convex side the wrinkling of the film surface is induced to be identified as inductive effect.The shielding and inductive effects make the dis-ordered wrinkling and buckling controllable.This phenomenon provides a potential application in the fabrication of flexible electronic devices.     

水稻秸秆接力处理过程中的红外光谱研究

作物秸秆就地焚烧已经和正在引起严重的大气污染,土壤微生物对作物秸秆的较难分解是作物秸秆农业利用的主要限制因子之一。文章采用傅里叶红外光谱(FTIR)分析技术对水稻秸秆接力处理(化学水解—微生物培养)过程进行了研究,分析探讨了接力处理的化学机理。由红外光谱的分析可见,经过接力处理,水稻秸秆半纤维素和纤维素大大降低,C／N比也降低到适合微生物生长的范围,硅元素的含量也降低,水溶性的物质含量升高,其结果与化学分析的结果一致。文章提出的水稻秸秆接力处理方法能为作物秸秆的农业利用提供有效途径。     

Expected thermal deformation and wavefront preservation of a cryogenic Si monochromator for Cornell ERL beamlines

Cornell energy‐recovery linac (ERL) beamlines will have higher power density and higher fractional coherence than those available at third‐generation sources; therefore the capability of a monochromator for ERL beamlines has to be studied. A cryogenic Si monochromator is considered in this paper because the perfect atomic structure of Si crystal is needed to deliver highly coherent radiation. Since neither the total heat load nor the power density alone can determine the severity of crystal deformation, a metric called modified linear power density is used to gauge the thermal deformation. For all ERL undulator beamlines, crystal thermal deformation profiles are simulated using the finite‐element analysis tool ANSYS, and wavefront propagations are simulated using Synchrotron Radiation Workshop. It is concluded that cryogenic Si monochromators will be suitable for ERL beamlines in general.