三峡库区泄滩滑坡滑带土特征研究

在滑坡地质灾害勘察过程中,如何准确地辨识滑带土的特征和确定滑动面的具体位置,是让大多数工程技术人员都感到头痛的问题。本文以三峡库区泄滩古滑坡为例,较为详细地介绍了泄滩滑坡滑体的结构特征,以及通过勘探平硐、钻孔岩芯和地表露头等多种手段揭露的滑带土的基本特征。研究结果表明,泄滩滑坡滑带土中不仅可见明显的擦痕、镜面以及碎块石印模,而且在个别钻孔可见滑带土呈糜棱岩化现象,地表露头还可见到滑带土在地下水和高速下滑过程中被碾压、搓揉原有结构被破坏后又重新胶结的痕迹。同时,在滑带以下还存在一层特殊的滑坡影响带。泄滩滑坡滑带土特征非常典型,具有一定的代表性,可供同行在实际工作中确定滑面时参考。     

Stress state in the plastic zone on the continuation of an elliptic mode I crack under bi-and tri-axial loading

The spatial stress state in a circular plastic zone near an elliptic crack under bi-and tri-axial asymmetric loading at infinity is studied. It is shown that the plastic constraint factor peaks at the points with maximum external tensile tangential stresses on the crack boundary. The use of a two-parameter failure criterion leads to the conclusion that the limit state can first be reached at the ends of the major axis of the elliptic crack depending on the relation between the external stresses __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 11, pp. 24–30, November 2007.     

基于自然单元法的轴对称结构极限上限分析

自然单元法是一种以自然邻近插值为试函数的新兴无网格数值方法,其形函数的计算不涉及矩阵求逆,也不需要任何人为参数。为了充分发挥自然单元法的优势,本文基于极限分析上限定理建立了轴对称结构极限上限分析的整套求解算法。轴对称结构的位移场由自然邻近插值构造,并且采用罚函数法处理材料的不可压条件。为了消除目标函数非光滑所引起的数值困难,采用逐步识别刚性区和塑性区,并对两者用不同方法进行处理。数值算例结果表明,本文提出的轴对称结构极限上限分析方法是行之有效的。     

Partial sliding along a planar crack weakened by the presence of fluid

Partial sliding along a infinite planar crack that is locally weakened by the presence of fluid is analyzed. Under uniformly applied normal and shear loads the crack surface generates non-uniform frictional resistance that has a local minimum within a penny-shaped fluid-filled domain. After the applied shear load reaches the resistance minimum a circular sliding zone initiates and then spreads around as the applied shear load is gradually increased. The primary focus of this work is to analyze sliding evolution as a function of the applied loads and the induced fluid pressure. The growth of the sliding zone is studied based on the criterion that shear stress intensity factors are zero along the zone boundary. An analytical relation between the radius of the sliding zone and the applied shear load is determined.     

Diffractive Beam-Shaping Element for Generating Multiple Structured Beams with Distinct Spatial Structures

This paper presents a novel approach for generating structured light using a diffractive beam-shaping element that can generate multiple beams with distinct spatial structures in the focal plane. The element is constructed by restructuring a spiral zone plate with fork gratings, providing a tunable and controllable means for generating structured light. The element can create linear and 2D arrays of various structured beams, including vortices with adjustable charge and vorticity, petallike beams, and ring-lattice structures. To control the generation of these beams, it introduces several parameters of the fork gratings, enabling tailoring of the beam properties to specific applications. The proposed approach involves significant mathematical analysis, including the derivation of complex equations and expressions to understand the behavior of the proposed element and its impact on the generated beams. It conducts simulations and experiments to validate the mathematical analysis and demonstrate the feasibility of the proposed approach.     

新疆开发区土地利用效率分析

利用DEA-VRS模型,对新疆46个开发区2011-2014年土地利用效率进行了评价,结果发现:1)从整体来看,新疆开发区开发区土地配置不断优化,土地利用效率逐年提高;2)开发区整体的效率与最优效率水平之间仍存在较大差距,土地利用效率仍处于较低的水平;3)开发区间的工业用地效率差异明显,开发区等级越高,土地利用效率也越高,国家级开发区土地利用效率明显高于自治区级开发区.利用2011-2014年46个新疆开发区的面板数据,构建随机效应Tobit模型,估计了微观开发区属性和宏观政策两类因素对开发区土地利用效率的影响.估计结果表明,开发区的产业结构、专业化程度和经济密度均会对用地效率产生正向影响.而工业用地出让方式的变化和工业用地价格也是影响开发区的土地利用效率的重要因素.     

Metastable zone width and nucleation threshold of aluminium hydroxyfluoride hydrate

This paper considers the metastable zone width (MSZW) of aluminium hydroxyfluoride hydrate (AHF, AlF₂OH.H₂O) crystallizing solution, with a view to identifying suitable conditions for crystal growth. Speciation calculations combined with experimental validations have been used to estimate the degree of saturation at varying pHs leading to the identification of the metastable zone width (MSZW). From the results obtained, the solutions are saturated at pH 3.0 ± 0.3 and remain metastable until the nucleation threshold is reached at pH 5.0 ± 0.3. A narrowing of the MSZW at elevated temperatures has been observed and is attributed to the decrease in AHF solubility with increasing temperatures. This phenomenon was applied to obtain a tripling of the crystal particles in 30 minutes. The pH profile of the crystallizing solution is similar to that of acid/base titration curves and is found to be a quick and accurate method of estimating the MSZW. Using similar terminologies, the equivalent point corresponds to solution saturation while the mid‐point corresponds to the nucleation threshold. These results are applicable in the recovery of fluoride values of spent pot lining.     

Influences of ethanol on the thermodynamics and kinetics in the crystallization of xylitol

The metastable zone and crystal growth rates of xylitol in water were investigated under the influence of small volume fractions of ethanol. The utilization of low amounts of ethanol is necessary to help adding slightly soluble ingredients during the fabrication of xylitol products, e.g. in food industry. Therefore, the metastable zone and crystal growth rates were determined by means of an ultrasound measurement technique and batch crystallization experiments. It can clearly be seen that the addition of ethanol is lowering the solubility of xylitol in water. The higher the volume fraction of ethanol, the lower the solubility. The metastable zone width is increased whereas the smallest investigated ethanol content results in the widest metastable zone. The crystal growth of xylitol is inhibited by the addition of ethanol whereby the crystal growth rates are decreasing with increasing ethanol content.     

Model of the fracture process zone at the tip of a crack reaching the nonsmooth interface between elastic media

The paper is concerned with the fracture process zone at the tip of a crack at the nonsmooth interface between isotropic elastic media. A plane symmetric problem is formulated. The zone is modeled by lines of discontinuity of the normal displacement at the interface. The exact solution of the elastic problem is found by the Wiener-Hopf method Translated from Prikladnaya Mekhanika, Vol. 44, No. 10, pp. 13–22, October 2008.     

毛细管区带电泳中钴、镍、锌、锰等金属离子的络合富集

提出了CZE络合富集的基本方法。通过络合作用使金属离子在样品区带和背景电解质中具有不同迁移速度而实现富集。以金属离子Co^2 、Zn^2 、Mn^2 和Ni^2 为溶质，4-(2-吡啶偶氮)间苯二酚(PAR)和EDTA为络合剂进行实验研究，探讨了柱容量、样品浓度、络合剂种类及进样方式等参数对富集的影响。在不超出柱容量的情况下，峰高随着进样时间的增加而增大。采用pH8．40、6．25mmol／L硼酸盐分离不同浓度Co^2 、Ni^2 ，进样量可增加约100倍，检测灵敏度增加40倍。