损伤因素对单层平面索网静力性能影响研究：有限元分析与试验验证

运用通用有限元软件ANSYS建立三维有限元模型,对横索与竖索连接节点失效、索预应力损失和锚固端失效这三种损伤因素的不同损伤工况下,单层平面索网结构的受力性能进行了非线性有限元分析,并与相应的试验结果进行了全面对比分析。结果表明：本文的有限元模型能够准确地分析计算上述三种损伤因素对单层平面索网结构受力性能的影响,包括结构...     

水泥砂浆的一个热粘弹性率型损伤本构模型

利用SHPB实验系统及自行研制的混凝土类材料快速高温加热设备,对水泥砂浆试件进行了不同 温度(20~600℃)和3种冲击速度下的实验,得到了不同温度和冲击速度下水泥砂浆试件的应力应变关系曲 线。基于ZWT粘弹性本构模型,并且考虑高温下水泥砂浆损伤演化规律都服从Weibull分布,提出了一个水 泥砂浆的热粘弹性率型损伤本构模型。通过数据拟合,获得了本构模型的相关参数,结果表明:理论预测和实 验结果吻合良好。     

Test analysis of detection of damage to a complicated spatial model structure

A two-stage damage detection approach is proposed and experimentally demonstrated on a complicated spatial model structure with a limited number of measurements. In the experiment,five known damage patterns,including 3 brace damage cases and 2 joint damage cases,were simulated by removing braces and weakening beam-column connections in the structure. The limited acceleration response data generated by hammer impact were used for system identification,and modal parameters were extracted by using the eigensystem realization algorithm. In the first stage,the possible damaged locations are determined by using the damage index and the characteristics of the analytical model itself,and the extent of damage for those substructures identified at stage I is estimated in the second stage by using a second-order eigen-sensitivity approximation method. The main contribution of this paper is to test the two-stage method by using the real dynamic data of a complicated spatial model structure with limited sensors. The analysis results indicate that the two-stage approach is ableto detect the location of both damage cases,only the severity of brace damage cases can be assessed,and the reasonable analytical model is critical for successful damage detection.     

深水钢悬链线立管触地区疲劳实验系统设计

深水钢悬链线立管(steel catenary riser, SCR)触地区易发生疲劳破坏, 且疲劳寿命预测问题是目前理论计算与数值分析的难点, 通过实验能更好地促进理论和数值研究. 因此在相关理论研究基础上, 设计一套SCR触地区疲劳实验系统, 模拟实际工作状况, 考虑张力、弯曲、内外压与管土相互作用等因素的变化组合. 该实验系统为以后开展深水立管疲劳实验、研究SCR触地区疲劳破坏机理以及准确预测SCR触地区的疲劳寿命奠定基础.     

The issues of the uniqueness and the stability of the homogeneous response in uniaxial tests with gradient damage models

We consider a wide class of gradient damage models which are characterized by two constitutive functions after a normalization of the scalar damage parameter. The evolution problem is formulated following a variational approach based on the principles of irreversibility, stability and energy balance. Applied to a monotonically increasing traction test of a one-dimensional bar, we consider the homogeneous response where both the strain and the damage fields are uniform in space. In the case of a softening behavior, we show that the homogeneous state of the bar at a given time is stable provided that the length of the bar is less than a state dependent critical value and unstable otherwise. However, we also show that bifurcations can appear even if the homogeneous state is stable. All these results are obtained in a closed form. Finally, we propose a practical method to identify the two constitutive functions. This method is based on the measure of the homogeneous response in a situation where this response is stable without possibility of bifurcation, and on a procedure which gives the opportunity to detect its loss of stability. All the theoretical analyses are illustrated by examples.     

THE USE OF VISCO-ELASTOPLASTIC DAMAGE CONSTITUTIVE MODEL TO SIMULATE NONLINEAR BEHAVIOR OF CONCRETE

A visco-elastoplastic damage constitutive model is proposed for simulating nonlinear behavior of concrete. Based on traditional plastic theory, the irreversible deformation is simulated in effective stress space. In order to reflect different stiffness degradation mechanism of concrete under tensile and compressive loading conditions, both tensile and compressive damage variables are introduced, and then on the basis of energy release rate, the model is firmly derived within the concept of irreversible thermodynamics. The rate-dependent model is considered by introducing viscous regularization into the inelastic strain and damage variable, and combined with an additional elastic condition. Fully implicit backward-Euler algorithm is used to perform constitutive integration. Results of numerical examples using the proposed model agree well with test results for specimens under uniaxial tension and compression, biaxial loading and triaxial loading. Failure processes of single-edge-notched (SEN) beam and double-edge-notched (DEN) specimen are also simulated to further validate the proposed model.     

局部裂纹损伤简支梁的曲率模态特性

将裂缝损伤简化成矩形凹槽,采用delta函数表示简支梁的裂纹损伤位置,得到了全梁范围内截面转动惯量和单位长度质量的表达式,建立了局部裂缝损伤简支梁的横向自由振动方程.利用摄动方法给出了裂纹摄动项的一般表达式,根据摄动项和完整梁都同时满足边界条件的特点,将一阶和二阶摄动项都表示成完整梁模态的线性组合,结合delta函数的性质,最终获得了受损简支梁的特征值和模态振型的解析表达式.最后,通过数值计算得到结构模态参数,对比了一阶摄动和二阶摄动对计算结果的影响,分析了不同阶固有频率和模态曲率的变动量,为简支梁的损伤监控和检测提供了理论依据.     

陶瓷靶抗射流侵彻的理论模型及数值模拟

以球型空腔膨胀理论为基础,提出了一个计算陶瓷靶板阻力的损伤模型,该模型考虑了损伤因子对陶瓷靶板弹道性能的影响.结合不可压缩流体力学理论,对射流侵彻陶瓷靶板的侵彻速度进行了理论值计算,并与未考虑损伤的侵彻速度进行了比较,该模型的计算结果更接近实验结果.建立了射流侵彻陶瓷靶板的数值计算模型,对铜射流侵彻陶瓷靶的动态破坏过程进行了研究,讨论了药型罩的锥角、壁厚对射流侵彻结果的影响,结果表明:相同锥角的药型罩,壁厚对陶瓷靶板孔径的影响较小;同壁厚的药型罩,随着锥角的增大,侵彻孔径增大.侵彻速度的数值模拟结果与理论结果进行了比较,得到了较好的一致性.     

弹性屈曲梁在参数激励下的倍周期分叉

考虑一端具有干摩擦的屈曲梁在轴向激励下的非线性振动系统，利用Ｆｌｏｑｕｅｔ理论和谐波平衡法，研究了系统中初始屈曲度、阻尼、频率、激励振幅等各种物理参数对１／２业谐共振情况下倍周期分叉的影响，其规律与以往的数值模拟结果具有很好的一致性。     

损伤体有效弹性性质的细观分析和不变性描述—— 一个考虑微缺陷相互作用的一般理论模式

通过引进微缺陷相互作用张量，建立了一个二维情况下考虑微缺陷（微裂纹或微孔洞）间相互作用的损伤固体有效弹性性质的一般理论模式模型中考虑了微缺陷的几何形状、取向分布和空间分布所造成的有效柔度张量的各向异性和材料中微缺陷之间的相互作用所引起的损伤柔度张量的高阶效应针对微椭圆孔、微圆孔和微裂纹问题，求得了相互作用张量的解析形式