Radiation damping in closed expanding universes

The dynamics of a coupled model (harmonic oscillator-relativistic scalar field) in Conformal Robertson-Walker (k = +1) spacetimes is investigated. The exact radiation-reaction equation of the source-including the retarded radiation terms due to the closed space geometry – is obtained and analyzed. A suitable family of Lyapunov functions is constructed to show that, if the spacetime expands monotonely, then the source's energy damps. A numerical simulation of this equation for expanding Universes, with and without Future Event Horizon, is performed.     

弹性波方程有限元模拟的曲边地表处理

本文对比研究了关于弹性波模拟中的曲边地表形状处理的两种方法,一种是用给定的实际介质数值划定的地表形状,另一种是用样条插值逼近地表形状.本文采用有限元方法进行弹性波数值模拟,给出了基于这两种方法计算的数值例子,并对结果进行了分析比较.结果表明使用后一种方法对地表进行处理时,地表人工离散产生的干扰明显减少,优于前一种方法.     

Analysis and design of mechanical crack arrestors for gas pipeline

Mechanical arrestors are frequently used in gas transmission pipelines to prevent the possibility of long running cracks. These arrestors have the effect of reducing the pipe from opening as the crack passes. This decreases the available crack driving force and, as a result, crack arrest may take place. This essentially is a second line of defence against catastrophic failure in the event crack initiation cannot always be prevented. A novel analyzing method presented in this paper has been developed to investigate the suitability of these crack arrestors. This is based on a fluid/structure/fracture interaction package, PFRAC. A dynamic finite element approach has been developed for a three dimension curved beam with initial plane curvature, which has been implemented in PFRAC to simulate the behaviour of the arrestor. The contact conditions between the pipe wall and the arrestor, along with the various computational procedures, are described. Several numerical results for a cracked pipe with arrestors are presented and compared with those for pipes without arrestors.     

进口附面层厚度对大转角弯叶片损失的影响

进口附面层厚度对大转角弯叶片损失的影响韩万今，吕红卫，芦文才，王仲奇（哈尔滨工业大学哈尔滨１５０００１）关键词：进口附面层，大转角，弯叶片叶片损失来源于两方面：一是进口附面层带来的“原”损失，二是绕流叶栅产生的新损失。二次流引起“原”损失重新分布，并...     

自然弯扭梁的非线性分析

研究了两端边界均为完全约束的自然弯扭梁在小应变，大位移和大转动情况下的非线性性质，并考虑了横向剪切变形和扭转翘曲变形的影响，分析中还包括了拉伸，弯曲和扭转的各种弹性耦合。由最小势能原理可以导出所给问题的平衡方程。这里欧拉角可以用来表示任意大的转动。该方法还可方便地推广到其他各种不完全约束边界的情况。此外，利用上述结果还可以得到该梁在小位移理论中的基本方程和有关公式。     

On the stability of elastic curved bars

A general discussion about the stability of arbitrary elastic curved bars in space under combined actions of bending and twisting is given in this paper. A system of Eqs. (28)–(36) for perturbation functions near some equilibrium state is presented. With appropriate boundary conditions, the nontrivial solution corresponds to the critical state. Five examples are analysed in this paper. Some of them are new results and others are old problems treated using the new method.     

The development of an axisymmetric curved turbulent wall jet

An experimental study has been carried out of the low speed Coanda wall jet with both streamwise and axisymmetric curvature. A single component laser Doppler technique was used, and by taking several orientations at a given point, values of the three mean velocities and five of the six Reynolds stresses were obtained. The lateral divergence and convex streamwise curvature both enhanced the turbulence in the outer part of the jet compared with a plane two-dimensional wall jet. The inner layer exhibited a large separation of the positions of maximum velocity and zero shear stress. It was found that the streamwise mean velocity profile became established very rapidly downstream of the slot exit. The profile appeared fairly similar at later downstream positions, but the mean radial velocity and turbulence parameters showed the expected nonself preservation of the flow. Removal of the streamwise curvature resulted in a general return of the jet conditions toward those expected of a plane wall jet. The range and accuracy of the data may be used for developing turbulence models and computational techniques for this type of flow.     

空间曲线索的平衡方程及单索几何判定

空间曲线索平衡方程可在理想柔索假定的基础上进行推导,也可以由空间曲线梁平衡方程退化得到。本文给出后者的连续化分析过程并进行了初步的讨论,目的在于将空间曲线索的各种力学模型统一起来。采用理想柔索假定后单索只能是平面曲线,自然坐标系和整体直角坐标系下平面曲线索的平衡方程是等价的。同时,针对以往单索连续化分析中几何判定的不足,基于空间曲线的弧长独立参数概念,指出单根理想柔索本质上为静不定和动不定体系。     

压电激励圆形曲梁的静态响应及位移控制

研究压电激励圆形曲梁的静态位移响应及位移控制的参数特性。将压电夹层圆形曲梁等效为单层结构,基于一维小曲率曲梁理论,建立其控制方程。在集中弯矩和径向集中力以及电载荷作用下,分析了带压电激励器的圆形悬臂曲梁的静态响应。与有限元结果比较表明:本文的理论模型能够模拟压电激励的小曲率圆形曲梁的静态响应。压电夹层圆形曲梁在任意位置的径向集中力载荷作用下,控制其自由端径向位移响应为零,求得控制电压的解析表达,数值分析表明:随着集中力载荷的位置变化和梁长的变化,最优控制电压将出现峰值和反号。     

Unsteady interaction of shock wave diffracting around a circular cylinder in air

The reflection and diffraction of a planar shock wave around a circular cylinder are a typical problem of the complex nonlinear shock wave phenomena in literature. It has long been studied experimentally, analytically as well as numerically. Takayama in 1987 obtained clear experimental pictures of isopycnics in shock tube under the condition that the impinging shock wave propagates as far as 3 diameters away from the cylinder. To know more completely the whole unsteady process, it is desirable to get experimental results in a region which is more than 10 diameters away from the cylinder. This is what has been done in this paper by using the pulsed laser holographic interferometry for several shock Mach numbers of the impinging shock. Results for several moments are shown, giving more knowledge about the whole unsteady flow field. This is useful for a reliable and complete understanding of the changing force acting on the cylinder, and provides interesting data to check the performance of many recently developed high resolution numerical methods for unsteady shock wave calculation. The project suported partially by National Natural Science Foundation of China