Tapered copolymers of styrene and 4-vinylbenzocyclobutene via carbanionic polymerization for crosslinkable polymer films

Well-defined polystyrene homopolymers with surface-adhesive triethoxysilyl end group were synthesized via living carbanionic polymerization, epoxide end-functionalization and subsequent hydrosilylation with triethoxysilane. Grafting-to performance of polymers with various molecular weight (M_n = 3000–14,000 g mol⁻¹) to a silicon surface was examined in dependence of reaction time, polymer concentration, solvent and number of alkoxysilyl end groups. Crosslinkable polymers for surface modification were synthesized by statistical carbanionic copolymerization of 4-vinylbenzocyclobutene (4-VBCB) and styrene, followed by epoxide end-functionalization and triethoxysilane modification (M_n = 4000–14,000 g mol⁻¹). The copolymers were characterized by ¹H-NMR, THF-SEC, and matrix-assisted laser desorption and ionization time-of-flight mass spectrometry. In situ ¹H-NMR kinetic studies in cyclohexane-d₁₂ provided information regarding the monomer gradient in the polymer chains, with styrene being the more reactive monomer (r_s = 2.75, r_4-VBCB = 0.23). Thin polymer films on silicon wafers were prepared by grafting-to surface modification under conditions derived for the polystyrene homopolymer. The traceless, thermally induced crosslinking reaction of the benzocyclobutene units was studied by DSC in bulk as well as in 3–6 nm thick polymer films. Crosslinked films were analyzed by atomic force microscopy, ellipsometry, and nanoindentation, showing smooth polymer films with an increased modulus. © 2019 The Authors. Journal of Polymer Science published by Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 181–192     

Mechanically tough and recoverable hydrogels via dual physical crosslinkings

Development of functional tough hydrogels with new network structures and energy dissipation mechanisms has great promise for many applications. Here, a new type of physical hydrogel crosslinked by hydrophobic association and hydrogen bonds was synthesized by a facile micellar copolymerization of hydrophobic methyl acrylate (MA) monomers and hydrophilic N-hydroxyethyl acrylamide (HEAA) monomers in the presence of Tween80 micelles. Strong hydrophobic association between inner MA and Tween80 and hydrogen bonds between external polyHEAA and Tween80 provide two distinct crosslinkers to construct mechanically tough and recoverable network. Mechanical properties of polyHEAA-MA@Tween80 hydrogels strongly depended on network components (HEAA, MA; Tween80 concentrations). At optimal conditions, the hydrogels can achieve fracture stress of 700 kPa, fracture strain of 1687 mm/mm, elastic modulus of 195 kPa, and tearing energy of 1598 J/m². Due to the reversible nature of physical interactions, polyHEAA-MA@Tween80 hydrogels can achieve fast stiffness/toughness recovery of 60%/33% without any external stimuli and resting time at room temperature. This work demonstrates a new design strategy to fabricate a new a single-network hydrogel with high mechanical and self-recovery properties by incorporating both hydrophobic association and hydrogen bonds in the network, which may provide alternative viewpoint for the design of multifunctional tough hydrogels. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1294–1305     

High modulus polyimide/polyimide molecular composite films that utilize acetylene unit as a crosslink site

Polyimide/polyimide molecular composite (MC) films comprised of a rigid polyimide derived from biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA) and a flexible polyimide derived from BPDA and bis (3,3'-diaminodiphenyl) acetylene (intA) and/or oxydianiline (ODA) were prepared by blending the polyamic acid solutions in 7 : 3 weight ratio, and then imidizing the blend films. Acetylene content in the flexible polyimide backbone was controlled by the ratio of intA and ODA. Cold-drawing of the blend polyamic acid films, followed by imidization, gives high modulus polyimide/polyimide MC films. The modulus of the MC films increased almost linearly with the draw ratio, reaching 25.5 GPa for the 40% drawn film. Acetylene groups in the flexible polyimide can be thermally cured to crosslink. The onset of exotherm appeared at 340°C on DSC, reaching maximum at 398°C. After the thermal crosslinking, the MC films maintained the high modulus, though elongation became small. Taking advantage of the crosslinkable acetylene units, two MC films were laminated and processed at 400°C for 20 min under 100 kg/cm² to give a good-quality laminate film. The interface of the two films was strongly bonded through the crosslinking of acetylene groups. Laminate films maintained the high modulus afforded by the cold-drawing. © 1994 John Wiley & Sons, Inc.     

Photo-initiated base-formation in a polymer matrix

It was found that amines were formed efficiently by the photolysis of O-acyloximes followed by hydrolysis in polystyrene films and the relationship between structures of O-acyloximes and yields of amines were investigated. O-phenylacetyl acetophenone oxime (PaApO), O-pivaloyl acetophenone oxime (PApO), and O-benzoyl acetophenone oxime (BApO) as monofunctional O-acyloximes and O,O′-succinyl diacetophenone oxime (SDApO) and O,O′-glutaryl diacetophenone oxime (GDApO) as bifunctional O-acyloximes were examined. The yields of amines for PaApO and SDApO under N₂ were ca. 70%, which was the highest among O-acyloximes examined in this experiment. On the other hand, the yields for PApO, BApO, and GDApO were less than 15% and it was verified that the hydrogen abstraction by imino radicals via 6-membered cyclic intermediates resulted in the lowering of yields. Although the effect of oxygen under photolysis on the yields of amine for PaApO was negligible under 50% conversion of PaApO, the yield decreased with further increase in the conversion and was 50% at 90% conversion. © 1994 John Wiley & Sons, Inc.     

The effect of mesogenic and non-mesogenic crosslinking units on the phase behaviour of side-chain smectic and cholesteric elastomers

Chiral monomer (M₁ ), mesogenic and non-mesogenic crosslinking agents (C₁ and C₂ ), and the corresponding liquid crystalline elastomers (P₁ and P₂ series), have been synthesised. Their chemical structures have been characterised by Fourier transform infrared or ¹H nuclear magnetic resonance and their phase behaviour investigated by differential scanning calorimetry, polarising optical miscoscopy, thermo-gravimetric analysis (TGA) and X-ray diffraction. The effect of the crosslinking unit on the phase behaviour of the elastomers has been studied. M₁ showed a cholesteric oily streak and focal conic texture. C₂ exhibited a nematic enantiotropic thread-like and schlieren texture, and a monotropic fan-shaped texture in the S_A phase. Due to the introduction of the mesogenic crosslinking unit, elastomers, P_2-1 ?P_2-5 , exhibited a cholesteric phase, while elastomers, P_1-1 ?P_1-4 , derived from a non-mesogenic crosslinking unit, exhibit a S_A phase. As the content of the crosslinking unit increased, the T _g of the P₁ series initially decreased and then increased, and the T _i of the series decreased. In the P₂ series the T _g increased, but the T _i initially increased and then decreased. TGA confirmed that all the elastomers had improved thermal stability.     

关于Aa-Bb型缩聚物网络结构的研究——溶胶凝胶分配理论

溶胶凝胶分配理论是在分子水平上表征交联网络结构的有效工具。由Flory等建立和发展起来的这一理论,由于引用了溶胶相无分子内环化反应的假定,特别是在理论推导中将分子内交联反应与分子间的链增长反应对两相分配的贡献未能加以区别,致使理论与实验不符。本文充分考虑了经典理论的这些缺欠,建立了更为符合客观实际的理论模型。同时,用十分简便的方法推导了反应溶胶分数,溶胶反应程度,分子内和分子间总反应程度等量宏观联系的参数方程组。以聚酯为模型化合物的实验研究与本文所得理论结果基本相符。     

氯磺化聚乙烯的γ—辐射交联

氯磺化聚乙烯(简称CSM)由于存在SO_2Cl基团很容易通过金属氧化物进行化学交联,但至今未见其辐射交联的详细报道.本文探讨氯含量对CSM辐射交联的影响. 所用CSM系吉林化工公司产品:20型(含氯量29～33％,下同),40型(33～37％)和30型(40～45％).将CSM和防老D按一定比例混炼均匀,再在140℃左右热压成形.试样用3.33×10~(15)Bg ~(60)Co于室温限量空气下进行辐照.辐照过的试样于80℃处理2小时以消除俘陷自由基.在氮气保护下先后用二甲苯和无水乙醇,加热回流48小时和8小时,测定凝胶含量.     

双丙酮丙烯酰胺参与共聚的聚丙烯酸酯乳液的制备及其应用

肼;聚氨酯;乳液性质;交联;双丙酮丙烯酰胺参与共聚的聚丙烯酸酯乳液的制备及其应用     

A critical analysis of the effect of crosslinking on the linear viscoelastic behavior of styrene–butadiene rubber and other elastomers

The linear viscoelastic behavior in dynamic shear and tensile creep at temperatures from −30 to 70 °C is measured for an styrene–butadiene rubber (SBR) elastomer cured with dicumyl peroxide to crosslinking densities between 0 and 23.5 × 10⁻⁵ mol/cm³. The G′, G″, and tan δ isotherms are analyzed by time–temperature superposition (TTS), where the tan δ master curves are consistent with those of Mancke and Ferry. However, to achieve the TTS in the lightly crosslinked SBR systems, an anomalous vertical shift is required in the narrow temperature region from 10 to 30 °C. The vertical shift factor in this temperature region is not the standard from rubber elasticity. No anomalous behavior is detected in the equilibrium modulus, which is a linear function of temperature in accordance with the classical theory of rubber elasticity. In contrast to SBR, standard vertical shifts are required to effect TTS for uncrosslinked polybutadiene and an ethylene propylene diene monomer elastomer. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Rheological and thermal behavior of PLA modified by chemical crosslinking in the presence of ethoxylated bisphenol A dimethacrylates

Crosslinking structures can be partly introduced into PLA by melt mixing in a twin screw extruder with dicumyl peroxide (DCP) and ethoxylated bisphenol A dimethacrylates (Bis‐EMAs) as a crosslinking coagent. The study of DCP and Bis‐EMA contents on the melt rheology, thermal properties, dynamic mechanical properties and morphology of the reactive extruded pellets is presented. The results show that PLA with a DCP content higher than 3 phr exhibits increases in both the melt modulus and complex viscosity as compared with PLA. The introduction of DCP into PLA improved the thermal stability of the PLA. PLAs with various Bis‐EMA contents showed the optimum storage modulus and complex viscosity to occur at 5 phr Bis‐EMAs. Moreover, the glass transition, cold crystallization and melting temperature of PLAs decreased with increasing Bis‐EMA content. The crystallinity of the partly crosslinked PLAs was lower than that of PLA. Similar to the rheological results, the thermo‐mechanical properties showed that the storage modulus and loss modulus of the partly crosslinked PLAs increased with increasing Bis‐EMA contents up to 5 phr. In addition, these partly crosslinked PLAs showed rough surface or sea island‐like structure. Copyright © 2016 John Wiley & Sons, Ltd.