甲基丙烯酸全氟烷基代乙酯对天然橡胶乳液辐射改性研究

天然橡胶的性能与其组成中的C C双键有密切关系,由于C C双键的存在,为天然橡胶的改性提供了便利,大多数天然橡胶的改性方法,如氯化、氢氯化、环化、环氧化、接枝共聚等皆是建立在这一思路基础上的.White等[1]认为接枝天然橡胶的目的是提高天然橡胶的机械强度,赋予特殊的功能.作     

近临界水中苯丁烯酮合成新方法

试探了一种以水为反应介质合成本丁烯酮的新方法。在近临界水中，以苯甲醛 和丙酮为原料，在不外加任何催化剂、反应温度为260℃、反应时间为6h的条件下 ，苯丁烯酮的产率可达46．2％。该新方法避免了盐类副产物的产生，省去了常规 方法中反庆后繁琐的中和分离步骤。     

Conductive polyethylene-carbon black composites by elongational-flow injection molding Part 3. Study of the structure and morphology

The morphology and structure of high molecular weight linear polyethylene (M _w 450000) filled with carbon black and processed using molds that introduce an elongational flow component during injection molding has been examined using electron microscopy and x-ray diffraction techniques. The study of fracture surfaces reveals the display of shish-kebabs oriented along the injection direction with segregated longitudinal channels of carbon black particles. Molecular and lamellar changes in orientation are, furthermore, studied across the thickness of the moldings. It is shown that addition of carbon black particles to injection-molded polyethylene induces significant changes in lamellar orientation. Thus, while lamellar overgrowth proceeds perpendicular to the fiber axes within carbon free channels, lamellae grow randomly within carbon-enriched regions where flow is less pronounced.     

划痕试验法对特殊薄膜系结合力的检测与评价

简要介绍了划痕试验法测量表面薄膜与基体结合力的测试原理和实验方法，讨论了影响临界载荷Lc测量值准确性的主要因素，通过对薄膜系的分类以及大量实际测量数据的总结和分析，认为被测薄膜以及基体的物理化学特性对临界载荷的测量具有重要的影响，单纯从声发射信号的变化来确定临界载荷的方法有可能存在较大误差，分析和讨论了某些特殊薄膜系的声发射信号与其实际临界载荷值之间存在较大偏差的现象和原因，并提出了针对不同膜系，合理利用声发射曲线，摩擦力斜率以及显微观测来正确判定临界载荷的必要性。     

Characterization of Ultrathin Films of Cellulose Esters

The adsorption of cellulose acetate (CA), cellulose acetate propionate (CAP) and cellulose acetate butyrate (CAB) from solutions prepared in acetone onto silicon wafers led to ultrathin films, which were characterized by ellipsometry, atomic force microscopy (AFM) and contact angle measurements. The polysaccharides films were characterized in the air just after their formation and after annealing at temperatures higher than their glass transition temperature or melt temperature. The films thickness close to 2 nm and surface roughness did not vary significantly upon annealing. AFM images revealed the presence of small clumps dispersed on a homogeneous layer, which covered completely the Si wafers. Such topographic details were also observed after annealing. However, upon annealing the films surfaces changed from hydrophilic to hydrophobic, evidencing molecular re-orientation at the solid–air interface. The adhesion of bovine serum albumin (BSA) and lipase onto the cellulose esters films was quantified in order to evaluate the possibility of applying such films as selective support for biomolecules.     

接触角法研究医用聚醚聚氨酯材料表面自由能与界面自由能

<正> 表面性质在医用材料与生物体的相互作用中起着至关重要的作用,如血液相容性材料的表面对血细胞具有吸附、变形、凝血、溶血等作用。表面能和界面能是医用材料的重要研究内容之一,材料的表面能及其极性与非极性分量在影响或控制材料与生物体的相互作用之面一直是医用材料的重要课题。Raier曾提出当材料的临界表面张力在20-30erg/cm~2时,血液相容性好,也有人认为,血液与材料的界面自由能趋于零时,才能     

测接触角法确定偶联剂的最佳用量

偶联剂是一类能在无机填料和聚合物基材之间形成“分子桥”、改善两者之间相容性或提高两者之间相互作用能力的化合物。将经偶联剂改性的无机填料填充到聚合物中可以制得成本低、性能好的复合材料。由于偶联剂用量多少将对复合材料的性能产生较大影响,因此建立一种准确、简便地确定偶联剂最佳用量的方法有着十分重要的理论和实际应用意义。     

Electrokinetic and contact angle measurements of grafted carbon fibers

 The grafting method that has successfully been applied to methacrylic acid and liquid crystalline monomers was expanded to prepare amphoteric carbon fiber surfaces using 2-(N,N-dimethylamino)ethyl methacrylate as monomer. The obtained carbon fiber surfaces were characterized by contact angle and ζ-potential measurements. The expected basic behavior was not observed, instead an amphoteric character of the modified carbon fiber surface was found. The fiber surfaces display a basic character in the acidic pH-range, while they are acidic in the alkaline part of the pH-scale. An important influence is derived from the amount of initiator used to graft the monomers onto the fibers. The smaller the initiator concen-tration used during polymerization, the larger the amount of amino functionalities introduced to the carbon fiber surface. The wetting behavior versus water depends on the overall conformation of the immobilized polymer. During immersion into water the polymer acts hydrophobic, while during emersion, a hydrophilic character is observed, probably derived from conformational changes and swelling during the contact angle measure-ments in water. Received: 9 June 1998 Accepted: 13 August 1998     

Studies on the phase properties of lyotropic liquid crystals of Brij35/sodium oleate/oleic acid/water system:By means of polarizing microscope,SAXS,~2H-NMR and rheological methods

The pseudo-quaternary phase diagram of Brij35/sodium oleate/oleic acid/water systems has been investigated, and the liquid crystal area has been identified, which covers about two thirds of the whole phase diagram. The liquid crystal structure and behavior have been also studied by using polarizing texture, small angle X-ray scattering, 2H-NMR and rheometer etc. The result shows that when the composition of the system changes along the line of AA′ in this large liquid crystal region, the structural change is cubic→cubic/lamellar→lamellar→lamellar/hexagonal→hexagonal. Meanwhile, we made the first attempt of systematic study of the rheological properties of the above system. The lattice constants of cubic and hexagonal liquid crystals are 10.53 and 5.68 nm, respectively.     

表面能与晶体生长/溶解动力学研究的新动向

界面现象使物质在结晶过程中出现了临界现象.但最近的研究指出在物质溶解过程中,在表面能量的控制下也存在着临界现象以及尺寸效应.实验发现,当晶体自身小到一 定的程度时(通常在纳米尺度上并和临界蚀坑的大小相近),在溶解过程中其速度会自发降 低,反应被抑制乃至停止.尽管在热力学上表面能的因素可以赋予小颗粒晶体较大的溶解度 ,但表面能却也能通过对临界条件的控制而使这些微粒在动力学上不被溶解.这个发现不仅 解决了纳米颗粒在水溶液中稳定性的问题,而且还从动力学的角度解释了生物矿物选择纳米 尺度作为其基本构成单元的原因.由于表面能和晶体生长/溶解的动力学有着密切的关系, 我们可以通过对表面能的调节来修改它们的动力学速度和晶体的形貌.反过来,也可以用动力学的方法来测定表面能及表面吸附/脱附常数等.相对于常规的界面研究手段,通过生 长和溶解动力学途径所得的数据有着很好的可靠性及重复性.我们认为,晶体生长和溶解的 动力学和表面能的研究相结合,不仅为界面研究提供了新的思路和方法,而且也会推动晶体生长和材料科学的发展.