一种经验型疲劳小裂纹扩展模型

金属材料疲劳寿命由裂纹萌生和裂纹扩展寿命两部分组成,其中对于萌生寿命中的小裂纹分析是精确描述裂纹萌生寿命的关键．而小裂纹在扩展过程中由于尺寸相对较小,导致传统线弹性断裂力学预测方法失效,需要对其进行改进,考虑裂纹尖端塑性区引起的残余压应力对小裂纹扩展速度的影响．本文针对此问题进行了初步分析,通过对塑性区引起的残余应力的量化,结合小裂纹门槛值特性,提出了一种经验型修正的小裂纹扩展模型,用于定量预测裂纹的萌生寿命．使用铝合金6082-T6缺口试样进行了疲劳实验,并与理论结果进行了对比,验证了所提模型的有效性．     

磁粉法检测表面裂纹概率曲线的测定

本文介绍了利用实物零件测定裂纹检出概率的方法，并作出了用磁粉法检测表面裂纹的检测概率曲线，为大型构件检测周期的确定提供了可靠数据，为结构损伤容限设计，可靠性设计提供了重要的依据。     

Speeding up the FMMR perfect sampling algorithm: A case study revisited

In a previous paper by the second author, two Markov chain Monte Carlo perfect sampling algorithms—one called coupling from the past (CFTP) and the other (FMMR) based on rejection sampling—are compared using as a case study the move‐to‐front (MTF) self‐organizing list chain. Here we revisit that case study and, in particular, exploit the dependence of FMMR on the user‐chosen initial state. We give a stochastic monotonicity result for the running time of FMMR applied to MTF and thus identify the initial state that gives the stochastically smallest running time; by contrast, the initial state used in the previous study gives the stochastically largest running time. By changing from worst choice to best choice of initial state we achieve remarkable speedup of FMMR for MTF; for example, we reduce the running time (as measured in Markov chain steps) from exponential in the length n of the list nearly down to n when the items in the list are requested according to a geometric distribution. For this same example, the running time for CFTP grows exponentially in n. © 2003 Wiley Periodicals, Inc. Random Struct. Alg., 2003     

内部压力作用下矩形板中源于椭圆孔的分支裂纹应力强度因子的一种数值分析

应用一种边界元方法来研究内部压力作用下矩形板中源于椭圆孔的分支裂纹。该边界元方法由Crouch与Starfied建立的常位移不连续单元和笔者最近提出的裂尖位移不连续单元构成。在该边界元方法的实施过程中,左、右裂尖位移不连续单元分别置于裂纹的左、右裂尖处,而常位移不连续单元则分布于除了裂尖位移不连续单元占据的位置之外的整个裂纹面及其它边界。本数值结果进一步证实这种数值方法对计算有限大板中复杂裂纹的应力强度因子的有效性,同时该数值结果可以揭示裂纹体几何对应力强度因子的影响。     

前吸附技术-超高压液相色谱-串联质谱法同时测定酒中24种邻苯二甲酸酯

建立了前吸附技术-超高压液相色谱-串联质谱测定酒中24种邻苯二甲酸酯含量的方法。酒类样品经稀释、净化后采用前吸附技术排除仪器管路中的本底干扰,经超高压液相色谱-串联质谱仪进行测定。采用多反应监测模式、电喷雾电离源正离子(ESI⁺)模式进行检测,外标法定量。24种邻苯二甲酸酯在0.005~2.00 mg/L范围内线性关系良好,相关系数(r)均大于0.99,检出限(S/N=3)为0.003~0.05 mg/kg。以不含增塑剂的酒类样品作为空白样品进行加标回收率试验,各种邻苯二甲酸酯化合物的回收率为75.4%~118.2%,相对标准偏差(RSD)为4.0%~11.2%。该法不但可以有效排除管路中邻苯二甲酸酯本底的干扰,而且简单、灵敏、稳定。     

多功能Hopkinson压杆型试验装置的研制与应用

对传统的Hopkinson压杆试验装置进行了改进和完善，除了用于材料的动态压缩以外，还能进行动态拉伸、绝热剪切、裂纹扩展速度测定、动态断裂韧性测试等．本文介绍了几种试验方法的基本原理，并给出了试验结果．     

Estimation of the degree of asphericity of a glass sphere using a vectorial shearing interferometer

The degree of asphericity is estimated by determining the average radius of curvature in different sections, at various points on the surface of a sphere, and the deviation from it. We employ the vectorial shearing interferometer (VSI) as the instrument to determine the radius of curvature from two subapertures of the transparent glass sphere. We incorporate the sphere as a thick lens into the interferometric setup, illuminating it with an expanded beam. The spherical aberration, introduced by the sphere in the wave front, depends on the local sphere radius, on the refraction index of the glass, and on the cone angle of the source. The wave front aberrated by the sphere impinges on the VSI. Here, the wave front is divided in two in amplitude, it is sheared vectorially, and it is superimposed with itself. The fringe pattern is formed in the intersection of the wave fronts. The shape of the resulting fringe pattern is directly related to spherical aberration. We estimate qualitatively the degree of asphericity, comparing the phase gradients in different sections of the sphere. Here, we report on the experimental setup to test the asphericity, the results with different vectorial shearing (magnitude and direction). Finally, we perform a comparison with the theoretical predictions.     

The effect of the location of stage-I fatigue crack across the persistent slip band on its growth rate – A 3D dislocation dynamics study

Abstract

A 3D dislocation dynamics study to ascertain the probable path of stage-I fatigue crack propagation across the persistent slip band (PSB) in austenitic stainless steel is presented. Cyclic plasticity and the resulting crack tip slip displacement (CTSD) are evaluated for cracks of varying length introduced at PSB-center and at two PSB-matrix interfaces. CTSD attains high value at either of the two interfaces irrespective of the proximity of crack front to the grain boundary. Further, a difference in microcrack propagation rate is also observed among the two interfaces. The present results assert microcrack propagation preferrentially along one of the two PSB-matrix interfaces rather than at the PSB-center. A pre-existing PSB dislocation structure localises the cyclic slip for crack lengths up to approximately half of the grain depth for an applied strain range of 2 × 10^?4.     

Analysis of an interfacial crack in a piezoelectric bi-material via the extended Green’s functions and displacement discontinuity method

Based on the extended Stroh formalism, we first derive the extended Green’s functions for an extended dislocation and displacement discontinuity located at the interface of a piezoelectric bi-material. These include Green’s functions of the extended dislocation, displacement discontinuities within a finite interval and the concentrated displacement discontinuities, all on the interface. The Green’s functions are then applied to obtain the integro-differential equation governing the interfacial crack. To eliminate the oscillating singularities associated with the delta function in the Green’s functions, we represent the delta function in terms of the Gaussian distribution function. In so doing, the integro-differential equation is reduced to a standard integral equation for the interfacial crack problem in piezoelectric bi-material with the extended displacement discontinuities being the unknowns. A simple numerical approach is also proposed to solve the integral equation for the displacement discontinuities, along with the asymptotic expressions of the extended intensity factors and J-integral in terms of the discontinuities near the crack tip. In numerical examples, the effect of the Gaussian parameter on the numerical results is discussed, and the influence of different extended loadings on the interfacial crack behaviors is further investigated.     

一维六方准晶压电材料中幂函数型曲线裂纹的反平面问题

依据一维六方准晶压电材料反平面问题的基本方程,利用复变函数方法,通过引入适当的保角映射,研究了一维六方准晶压电材料中幂函数型曲线裂纹的反平面问题,并利用Cauchy积分理论,得到电不可通和电可通边界条件下的应力场和位移场的复表示以及裂纹尖端场强度因子的解析表达式.