Combining 2D synchrosqueezed wave packet transform with optimization for crystal image analysis

We develop a variational optimization method for crystal analysis in atomic resolution images, which uses information from a 2D synchrosqueezed transform (SST) as input. The synchrosqueezed transform is applied to extract initial information from atomic crystal images: crystal defects, rotations and the gradient of elastic deformation. The deformation gradient estimate is then improved outside the identified defect region via a variational approach, to obtain more robust results agreeing better with the physical constraints. The variational model is optimized by a nonlinear projected conjugate gradient method. Both examples of images from computer simulations and imaging experiments are analyzed, with results demonstrating the effectiveness of the proposed method.     

The resonant secondary emission of the F center in alkali halides

The secondary radiation after resonant excitation of F center and its linear polarization P correlated to the polarization of resonant light have been measured for five alkali halides at low temperatures. In KC1, the spectrum of P over the whole Stokes region is divided into three successive regions, the depolarization range at the one-phonon Raman scattering, the near plateau range, and the depolarization range down to vanishing. The former two have common relevance to resonant energy and symmetries of coupled phonons. These relevances are interpreted adopting a configuration coordinate model for 2s- and 2p-like excited states.     

Local defect structures and EPR studies on (FeO6)9− and (FeO4)5− clusters in YGG: Fe3+ system

The octahedral (FeO₆)^9? and tetrahedral (FeO₄)^5? clusters in yttrium gallium garnet (YGG): Fe³⁺ system are investigated based on the 252 × 252 complete energy matrices for d⁵ configuration ions in trigonal and tetragonal ligand fields, moreover, the EPR and optical spectra are made unified calculation. The results indicate that the defect structures around Fe³⁺ centres display expansion effects at different temperatures 4.2 and 295 K, and which are close to those in YIG garnet, respectively. Simultaneously, the defect structure parameters for Fe³⁺ centres in YGG are determined, and the relationship between the defect structure and the temperature has been discussed.     

Effects of the primary recoil spectrum on long-range migration of defects

Abstract

For quantitative predictions and comparisons of microstructures that evolve during exposure to different radiation environments at elevated temperature one needs to develop methods that go beyond those based on the number of displacements per atom. The number of freely migrating defects that contribute to the microstructural development is far less than the total number of defects produced, as has been recognized for some time from measurements of radiation-induced segregation and of radiation-enhanced diffusion. Defect production in various neutron and ion irradiation environments is discussed in light of this fact. A method to calculate the fraction of freely migrating defects from the cluster size distribution of defects produced in cascades is suggested. The results are in good agreement with available data.     

无机固体材料中的忆阻效应

缺陷调控是固体化学中的基本问题,也是决定材料性能的核心要素。基于缺陷调控的忆阻效应将给未来电子信息领域带来全新的变革。本文综述了无机固体材料中忆阻效应的研究进展,主要总结了忆阻效应的产生机制和忆阻材料的类型,结合原子级p-n结的相关工作,提出深入明确电场下缺陷迁移机制将是从无机固体化学角度研究忆阻效应的重要方向。     

纳米孔缺陷导致单层黑磷电荷局域极大抑制非辐射电子-空穴复合的时域模拟

通常认为缺陷加速黑磷的非辐射电子-空穴复合,阻碍器件性能的持续提高。实验打破了这一认识。采用含时密度泛函理论结合非绝热分子动力学,我们发现P-P伸缩振动驱动非辐射电子-空穴复合,使纳米孔修饰的单层黑磷的激发态寿命比完美体系延长了约5.5倍。这主要归因于三个因素。一,纳米孔结构不但没有在禁带中引入深能级缺陷,而且由于价带顶下移使带隙增加了0.22 eV。二,除了带隙增加,纳米孔减小了电子和空穴波函数重叠,并抑制了原子核热运动,从而使非绝热耦合降低至完美体系的约1/2。三,退相干时间比完美体系延长了1.5倍。前两个因素战胜了第三个因素,使纳米孔结构激发态寿命延长至2.74 ns,而其在完美体系中约为480 ps。我们的研究表明可以制造合理数量和形貌的缺陷,如纳米孔,降低黑磷非辐射电子-空穴复合,提高光电器件效率。这一研究对于理解和调控黑磷和其它二维材料的激发态性质有重要意义。     

Surface domain potential difference-mediated efficient charge separation on a defective ZnIn2S4 microsphere photocatalyst

Low-efficiency charge separation in metal sulfides is a major obstacle to realizing high photocatalytic performance. Herein, we propose the concept of a similar surface domain potential difference between adjacent microdomains with and without surface S vacancies on ZnIn₂S₄ to mediate charge separation. Defective ZnIn₂S₄ microspheres (DZISNPs) are prepared through a solvothermal method combined with a low-temperature hydrogenation surface engineering strategy. The as-prepared DZISNPs with a narrowed bandgap of 2.38 eV possess a large specific surface area of 178.5 m² g^?1, a pore size of 6.89 nm, and a pore volume of 0.36 cm³ g^?1, which further improves the visible light absorption. The resultant DZISNPs exhibit excellent visible light activity (2.15 mmol h^?1 g^?1), which is ～two-fold higher than that of the original DZISNP. The experimental results and DFT calculations reveal that the enhanced property can be a result of the surface S vacancy-induced surface domain potential difference, promoting the spatial separation of electrons and holes. Furthermore, the long-term stability of the DZISNPs indicates that the formation of surface S vacancies can inhibit the photocorrosion of ZnIn₂S₄. This strategy provides new insights for fabricating highly efficient and stable sulfide photocatalysts.     

Defect Engineering and Anisotropic Modulation of Ionic Transport in Perovskite Solid Electrolyte LixLa(1−x)/3NbO3

Solid electrolytes, such as perovskite Li_3xLa_2/1−xTiO₃, Li_xLa_(1−x)/3NbO₃ and garnet Li₇La₃Zr₂O₁₂ ceramic oxides, have attracted extensive attention in lithium-ion battery research due to their good chemical stability and the improvability of their ionic conductivity with great potential in solid electrolyte battery applications. These solid oxides eliminate safety issues and cycling instability, which are common challenges in the current commercial lithium-ion batteries based on organic liquid electrolytes. However, in practical applications, structural disorders such as point defects and grain boundaries play a dominating role in the ionic transport of these solid electrolytes, where defect engineering to tailor or improve the ionic conductive property is still seldom reported. Here, we demonstrate a defect engineering approach to alter the ionic conductive channels in Li_xLa_(1−x)/3NbO₃ (x = 0.1~0.13) electrolytes based on the rearrangements of La sites through a quenching process. The changes in the occupancy and interstitial defects of La ions lead to anisotropic modulation of ionic conductivity with the increase in quenching temperatures. Our trial in this work on the defect engineering of quenched electrolytes will offer opportunities to optimize ionic conductivity and benefit the solid electrolyte battery applications.     

一维相位缺陷量子行走的共振传输

从分立时间量子行走理论出发, 分别在包含两个格点相位缺陷和一段格点相位缺陷(方相位势)的一维格点线上研究量子行走的静态共振传输. 利用系统独特的色散关系和边界点上的能量守恒条件, 获得量子行走通过缺陷区域的透射率, 讨论了相位缺陷的强度和宽度不同时透射率随入射动量的变化行为. 在相位缺陷强度π/2两侧, 透射率表现出不同的共振特性, 并给出了强缺陷强度下共振峰和缺陷宽度的关系.