Development of picosecond time‐resolved X‐ray absorption spectroscopy by high‐repetition‐rate laser pump/X‐ray probe at Beijing Synchrotron Radiation Facility

A new setup and commissioning of transient X‐ray absorption spectroscopy are described, based on the high‐repetition‐rate laser pump/X‐ray probe method, at the 1W2B wiggler beamline at the Beijing Synchrotron Radiation Facility. A high‐repetition‐rate and high‐power laser is incorporated into the setup with in‐house‐built avalanche photodiodes as detectors. A simple acquisition scheme was applied to obtain laser‐on and laser‐off signals simultaneously. The capability of picosecond transient X‐ray absorption spectroscopy measurement was demonstrated for a photo‐induced spin‐crossover iron complex in 6 mM solution with 155 kHz repetition rate.     

涡轮叶栅前缘槽缝气膜冷却的数值模拟

应用FINE/TURBO软件包,求解三维雷诺平均N-S方程,对叶片前缘有两列冷却槽缝的气膜冷却流场进行了数值模拟,获得了不同吹风比下叶片表面静压分布与极限流线.在计算结果与实验数据良好符合的基础上,详细分析了槽缝冷却三维定常流场结构与槽缝附近的流动细节.研究结果表明,槽缝冷却对前缘压力分布影响较大,且在压力面引起较大的分离流动,不利于冷却.     

债券价值对市场利率变化的敏感度

有关长期债券的价值对市场利率变化的敏感度高于短期债券的价值对市场利率变化的敏感度,本文给出了它成立的条件及它不成立的条件.     

均匀设计在研究C/Cu复合材料耐磨损设计准则中的应用

本文用均匀设计安排 Ｃ／ Ｃｕ 复合材料的磨损试验,用逐步回归方法建立了可靠度与载荷ｐ、速度ｖ 的回归方程,它有助于对 Ｃ／ Ｃｕ 复合材料磨损性能设计准则进行研究     

CH3COSbCl6催化四氢呋喃聚合的研究

ＣＨ_３ＣＯＳｂＣｌ_６催化四氢呋喃聚合的研究栗方星，王红军，马克勤（南开大学化学系，天津，３０００７１）关键词聚四氢呋喃，乙酰基六氯锑酸盐，表观聚合反应速率常数，五氯化锑ＴＨＦ聚合为平衡聚合反应应［１，２］，文献报道［３，４］Ｅｔ３ＯＢＦ４、Ｅｔ３Ｏ...     

Production of carbon soot with a high content of C60 and C70 fullerenes by electric arc

The effect of the parameters of the electric arc (helium pressure, current and voltage, clearance between electrodes) and of the peculiarities of the setup design (arrangement of electrodes, distance between the arc and the cooling surface, temperature of the soot condensation surface) on the yield of fullerenes has been studied. Conditions for producing soot with a C₆₀ and C₇₀ content up to 43% (toluene extract) have been found.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 805–809, May, 1994.The authors are grateful to N. G. Spitsyna and A. V. Dubovitskii for the determination of the content of C₆₀ and C₇₀ fullerenes in the extract.The work was financially supported by the Russian Foundation for Basic Research (Project 93-03-18705).     

Anisotropic compressive behavior of rigid PVC foam at strain rates up to 200 s−1

The elevated strain rate compressive response of closed-cell polyvinyl chloride (PVC) foam at various densities is investigated. Two loading directions, (i.e., parallel and perpendicular to foam rise direction) were considered to investigate structural anisotropy. The elevated strain rates tests (up to 200 s⁻¹) were performed using a customized drop tower device. Engineering stress/strain behavior, energy dissipation, and maximum stress capacity were obtained for each density and compared against each other. Except for the lowest density of 45 kg/m³, strain rate effects were clearly observed through increased compressive strength and plateau stress when loading in the foam rise direction. The strain rate effect is more evident at higher densities. However, no significant strain rate effect was observed when loading perpendicular to the foam rise direction. Scanning electron microscopy (SEM) analysis showed that plastic hinges are the primary deformation mechanism for PVC foam cells. An analytical model has been calibrated using the experimental results and successfully predicted the mechanical response of the foam. Shape anisotropy has been measured employing the SEM images. The analytical approach was also able to predict the foam's anisotropic mechanical response.     

Fractionation of HDPE on quench cooling

In a previous paper we discussed co-crystallization in a LDPE/HDPE blend using TREF and DSC. As part of that study it was observed that pure HDPE showed an unexpected fractionation behavior when quench crystallized in TREF. The overall peak broadened and two peaks appeared instead of the previously observed single peak for slow cooled HDPE.The development of two peaks was observed for all commercial HDPEs investigated, independent of their melting indices and densities. TREF and GPC were used in an attempt to evaluate the origin of the two HDPE components.The authors appreciate support from CAPES-BRAZIL (C.A.F.). Additional thanks go to Dr. G. W. Knight in Dow Chemical Company for kindly providing the polymer samples and performing the GPC analysis.     

Environmental Effect of Macrocyclic Molecules on the Oxidation of Triethylamine by Ferricyanide Ion in Aqueous Solution

The effect of 18-crown-6 and kryptofix (2,2,1) on the oxidation of triethylamine byaqueous ferricyanide ion has been studied at pH 4, 7, and 9.The macrocycle retarded the normal oxidation process at all pH values,the effect depending on the macrocyclic ligand concentration Kryptofix (2,2,1) had a greater effect than 18-crown-6 at all pHvalues in this study. For 18-crown-6, retardation decreases in the order pH 9 > 4 > 7 while forkryptofix it follows the order pH 9 > 7 > 4.