Metal Ion Guest Responsive Benzoxazine Dimers and Inclusion Phenomena of Cyclic Derivatives

This study was carried out with the aim to optimize the dissolution propertiesof diclofenac (DIC) – a non-steroidal anti-inflammatory drug sparingly solublein water – through association -with -cyclodextrin (CD). Theeffect of CD on the aqueous solubility of DIC was evaluated by thephase solubility method. The amount of DIC dissolved increased linearly withthe addition of CD according to an AL type plot and without precipitationof the complex. The apparent stability constant of the complex, calculated supposinga 1:1 stoichiometry, was 295 M^-1; this value was confirmed by circulardichroism analysis. DIC/CD interactions were also studied in water by¹H and ¹³C NMR spectroscopy. Equimolar DIC/CD solid systems were prepared by physical-mixing, kneading, co-evaporation andfreeze-drying, and their properties in the solid state studied by DifferentialScanning Calorimetry, X-ray powder diffractometry and Fourier-TransformInfrared analysis. For sake of comparison, the mixture of DIC and CDseparately lyophilized was investigated too. The results demonstrated that thefreeze-dried product had the highest degree of amorphization and they were inagreement with the existence of an inclusion complex in the solid state. Thedissolution profiles of the drug from each solid system were affected by its physico-chemical properties, the freeze-dried being the most rapidly dissolvingforms.     

The influence of the mercury and thallium atoms in organomercury and organothallium nitroxyl radicals on their reactivity

An increase is found in the reactivity of organomercury and organothallium nitroxyl mono- and biradicals of the imidazoline type in comparison with the analogous compounds without organometallic fragments. This is explained by the formation of coordination bonds NHg, NTl, and NOHg.Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 224–226, January, 1993.     

Theoretical study and rate constant calculation for the reactions of SH (SD) with Cl2, Br2, and BrCl

The mechanisms of the SH (SD) radicals with Cl2 (R1), Br2 (R2), and BrCl (R3) are investigated theoretically, and the rate constants are calculated using a dual-level direct dynamics method. The optimized geometries and frequencies of the stationary points are calculated at the MP2/6-311G(d,p) and MPW1K/6-311G(d,p) levels. Higher-level energies are obtained at the approximate QCISD(T)/6-311++G(3df, 2pd) level using the MP2 geometries as well as by the multicoefficient correlation method based on QCISD (MC-QCISD) using the MPW1K geometries. Complexes with energies less than those of the reactants or products are located at the entrance or the exit channels of these reactions, which indicate that the reactions may proceed via an indirect mechanism. The enthalpies of formation for the species XSH/XSD (X = Cl and Br) are evaluated using hydrogenation working reactions method. By canonical variational transition-state theory (CVT), the rate constants of SH and SD radicals with Cl2, Br2, and BrCl are calculated over a wide temperature range of 200-2000 K at the a-QCISD(T)/6-311++G(3df, 2pd)//MP2/6-311G(d, p) level. Good agreement between the calculated and experimental rate constants is obtained in the measured temperature range. Our calculations show that for SH (SD) + BrCl reaction bromine abstraction (R3a or R3a') leading to the formation of BrSH (BrSD) + Cl in a barrierless process dominants the reaction with the branching ratios for channels 3a and 3a' of 99% at 298 K, which is quite different from the experimental result of k3a'/k3' = 54 +/- 10%. Negative activation energies are found at the higher level for the SH + Br2 and SH + BrCl (Br-abstraction) reactions; as a result, the rate constants show a slightly negative temperature dependence, which is consistent with the determination in the literature. The kinetic isotope effects for the three reactions are "inverse". The values of kH/kD are 0.88, 0.91, and 0.69 at room temperature, respectively, and they increase as the temperature increases.     

Photophysical aspects of single-molecule detection by two-photon excitation with consideration of sequential pulsed illumination.

An important goal in single molecule fluorescence correlation spectroscopy is the theoretical simulation of the fluorescence signal stemming from individual molecules and its autocorrelation function. The simulation approaches developed up to now are based exclusively on continuous-wave (cw) illumination and consequently on cw-excitation. However, this approximation is no longer valid in the case of two-photon excitation, for which pulsed illumination is usually employed. We present a novel theoretical model for the simulation of the fluorescence signal of single molecules and its autocorrelation function with consideration of the time dependence of the excitation flux and thus of all illumination-dependent photoprocesses: two-photon excitation, induced emission and photobleaching. Further important characteristics of our approach are the consideration of the dependence of the photobleaching rate on illumination and the low intersystem-crossing rates of the studied coumarins. Moreover, using our approach, we can predict quantitatively the effect of the laser pulse width on the fluorescence signal of a molecule, that is, the contributions of the photobleaching and saturation effects, and thus we can calculate the optimal laser pulse width. The theoretical autocorrelation functions were fitted to the experimental data, and we could ascertain a good agreement between the resulting and the expected parameters. The most important parameter is the photobleaching constant sigma, the cross section of the transition Sn<--S1, which characterises the photostability of the molecules independent of the experimental conditions. Its value is 1.7 x 10(-23) cm2 for coumarin 153 and 5 x 10(-23) cm2 for coumarin 314.     

Advanced kinetic tools for the evaluation of decomposition reactions

Summary An advanced kinetic study on the thermal behaviour of pyrotechnic ignition mixtures has been carried out by differential scanning calorimetry using different B/KNO3 mixtures (50:50, 30:70, 20:80) as a model reaction. The experimental conditions applied (isochoric conditions/closed crucibles and isobaric conditions/open crucibles) as well as the composition of the mixtures noticeably influences the relative thermal stabilities of the energetic materials. The kinetic study focused on the prediction of the thermal stability of the different mixtures both in extended temperature ranges and under temperature conditions at which ordinary investigation would be very difficult. Using advanced numerical tools [1], thermal ageing and influence of the complex thermal environment on the heat accumulation conditions were computed. This can be done for any surrounding temperature profile such as isothermal, non-isothermal, stepwise, modulated, shock, adiabatic conditions and additionally for temperature profiles reflecting real atmospheric temperature changes (yearly temperature profiles of different climates with daily minimal and maximal fluctuations). Applications of accurate decomposition kinetics enabled the determination of the time to maximum rate under adiabatic conditions (TMR_ad) with a precision given by the confidence interval of the predictions. This analysis can then be applied for the examination of the effects of the surrounding temperature for safe storage or transportation conditions (e.g. determination of the safe transport or storage temperatures).     

Structure formation in heavy metal oxyhydrates at low rates of gel formation

Oxyhydrate gels have a hydrophilic surface, due to which they undergo destruction and secondary polymerization in aqueous media. Prolonged storage in aqueous solution gives rise to regions with selfsimilar helical ordering in gels. Structuring of this kind is also observed when synthesis is conducted under conditions that provide low gelation rates. Electromagnetic UV and visible radiation is another means to change the gel structure; it makes the oligomer species pass into the excited state, due to which one of the directions of structuring becomes dominant. This work summarizes the results of computer simulation of gel agglomerates. For oxyhydrate systems, helical ordering was found to be one of the local energy minima. The units of a macrohelix can lie at various angles relative to one another, and they can change, after absorption of energy, the helix pitch and the order of elements in the helix.     

Surface transient effects in ultralow‐energy Cs+ sputtering of Si

This study examines the dependence of the sputter rate and the transient width (z_tr) as a function of Cs⁺ primary ion energy (impact energy (E_p) = 320 eV, 500 eV and 1 keV) and incident angles between 0 and 70° . The instrument used was the ATOMIKA 4500 SIMS depth profiler and the sample was Si with ten delta layers of Si_0.7 Ge_0.3. We observed the narrowest transient widths of between 1.4 and 2.0 nm apparent depth. This was achieved at incident angles (θ) of 30–50° . An extended transient effect was observed when profiled at θ > 50° . Below this incident angle, the transient width is less than twice the penetration depth (z_tr < 2R_norm). At minimum z_tr, z_tr ≈ R_norm. The detection sensitivity is best achieved at θ ≈ 30° for all energies investigated. The sputter rate is lowest at normal incidence, rising gradually to a maximum at θ ≈ 50–60° . This is similar to that observed with ultralow‐energy O₂⁺ primary ion beams. 1 At ultralow energies, reducing E_p does not have a significant effect in reducing z_tr. We conclude that for E_p < 1 keV, the optimum condition to achieve minimum z_tr while maintaining good sensitivity and high sputter rate is at θ ≈ 30° . Copyright © 2007 John Wiley & Sons, Ltd.     

主动冷却点阵夹层防热结构温度响应计算模型北大核心CSCD

针对点阵夹层结构主动热防护问题,建立了夹层结构面板和芯体导热与冷却剂对流耦合的非稳态传热理论模型,利用有限体积法离散控制方程并在MATLAB中进行了迭代求解.模型首次考虑了面板与夹芯杆之间的收缩热阻,并利用分离变量法得到了收缩热阻的近似解析解.基于单胞模型和周期性边界条件,模拟得到了模型所需的表面对流传热系数h_(b)和h_(fin).最后,选取多单胞计算工况进行数值模拟和理论模型对比,并讨论了收缩热阻对模型预测精度的影响.结果表明:理论模型能够准确预测夹层结构及内部流体的温度变化,理论与仿真之间的最大误差不超过1%;随着外加热流密度不断增大,忽略收缩热阻使得计算结果造成的误差不断增大;与数值模拟相比,理论模型可显著地减少计算时间并节省计算资源,尤其适用于非均匀、非稳态复杂热载荷下点阵夹层结构的温度响应计算.     

非全局Lipschitz条件下跳适应向后Euler方法的强收敛性分析

本文研究跳适应向后Euler方法求解跳扩散随机微分方程在非全局Lipschitz条件下的强收敛性.通过克服方程非全局Lipschitz系数给收敛性分析带来的主要困难,我们成功地建立了跳适应后向Euler方法的强收敛性结果并得到相应的收敛率.最后,我们通过数值试验对前文所得理论结果做进一步的验证.