The structure and electrochemical characteristics of La0.67Mg0.33 (Ni0.8Co0.1Mn0.1) x (x=2.5–5.0) multiphase alloys for nickel-metal hydride batteries

This paper presents results concerning structure and electrochemical characteristics of the La_0.67Mg_0.33 (Ni_0.8Co_0.1Mn_0.1) _x (x=2.5–5.0) alloy. It can be found from the result of the Rietveld analyses that the structures of the alloys change obviously with increasing x from 2.5 to 5.0. The main phase of the alloys with x=2.5–3.5 is LaMg₂Ni₉ phase with a PuNi₃-type rhombohedral structure, but the main phase of the alloys with x=4.0–5.0 is LaNi₅phase with a CaCu₅-type hexagonal structure. Furthermore, the phase ratio, lattice parameter and cell volume of the LaMg₂Ni₉phase and the LaNi₅ phase change with increasing x. The electrochemical studies show that the maximum discharge capacity increases from 214.7 mAh/g (x=2.5) to 391.1 mAh/g (x=3.5) and then decreases to 238.5 mAh/g (x=5.0). As the discharge current density is 1,200 mA/g, the high rate dischargeability (HRD) increases from 51.1% (x=2.5) to 83.7% (x=3.5) and then decreases to 71.6% (x=5.0). Moreover, the exchange current density (I ₀) of the alloy electrodes first increases and then decrease with increasing x from 2.5 to 5.0, which is consistent with the variation of the HRD. The cell volume reduces with increasing x in the alloys, which is detrimental to hydrogen diffusion and accordingly decreases the low-temperature dischargeability of the alloy electrodes.     

Inclusion of α-phenyl-N-p-methylphenyl Nitrone in β- Cyclodextrin: Formation of 1G : 1H and 1G : 2H Complexes and the Remarkably Fast 1,3-Dipolar Cycloaddition of the 1G : 2H Complex with Olefins in the Solid State

The nitrone is found to be included in the -cyclodextrin cavity in two different stoichiometries viz., 1G : 1H and 1G : 2H – the existence of which is proved by physical methods. The 1G : 2H complex of the nitrone serves as a good potent dipolarophile in the 1,3-dipolar cycloaddition reactions with olefins resulting in rate acceleration and regioselection.     

Spectrophotometric study of the complexation of iodine with 1,7-diaza-15-crown-5 in chloroform solution

The complex formation reaction between iodine and 1,7-diaza-15-crown-5 (DA15C5) has been studied spectrophotometrically in chloroform at 25°C. The resulting 1:2 (DA15C5:I₂) molecular complex was formulated as (DA15C5...;I⁺)I ₃ ^– . The spectrophotometric results, as well as the conductivity measurements, revealed that the gradual release of triiodide ion from its contact ion paired form in the molecular complex into the solution is the rate determining step of the reaction. The rate constant was calculated ask=(8.8±0.2)×10^–3 min^–1. The formation constant of the molecular complex was evaluated from the computer fitting of the absorbance-mole ratio data as logK _f=6.89±0.09.     

Thermogravimetry as a screening tool for the estimation of the vapor pressures of pure compounds

A simplified approach was developed to estimate the vapor pressure of pure compounds from experimental data obtained by isothermal thermogravimetric (TG) analysis. A numerical procedure was developed to estimate the Antoine parameters of the substance by the analysis of isothermal TG data. The results of the experimental validations carried out evidenced that at least a preliminary estimation of vapour pressures of pure substances by the analysis of TG data is possible. The limited time and the reduced amounts of sample required for the experimental runs make the technique attractive with respect to the conventional and more accurate techniques for vapor pressure assessment.     

Kinetic-catalytic determination of traces of iron by the oxidative coupling reaction of 3-methyl-2-benzothiazolinone hydrazone with N,N-dimethylaniline

A new kinetic-catalytic method by the initial rate procedure for the determination of nanogram level of iron(III) is developed, which is based on its catalytic effect on the oxidative coupling of 3-methyl-2-benzothiazolinone hydrazone (MBTH) with N,N-dimethylaniline (DMA) to form an indamine dye (λ_max=590 nm) in the presence of hydrogen peroxide. Iron(II) is also determined, being oxidized to iron(III) by hydrogen peroxide. Calibration graphs obtained by the initial rate method are linear in the range 1–1000 ng ml⁻¹ Fe and as low as 10⁻⁸ M Fe(II, III) can easily be determined. The relative standard deviations are 6.6, 2.5 and 1.5% for ten determinations of 1, 20 and 60 ng ml⁻¹ of Fe(III), respectively. The method is applicable to the determination of iron in natural waters without preconcentration and separation.     

Physical and chemical properties of a durably efficacious ammonium bicarbonate as a fertilizer and its yield-increasing mechanism

A new fertilizer of cocrystal type,known as durably efficacious ammonium bicarbonate (DEAB),has been developed by adding a certain amount of dicyandiamide (DCD) as an ammonia-stabilizing agent to ammonium bearbenate(AB)during the process of its production.As compared with AB,DEAB was found to have a reduction of direct volatilization loss by 53%,a fertilizer availability period prolonged from 35-45 to 90-110 d,and an increase in the rate of nitrogen in fertilizer being utilized by 5.9%-10.2%,and a saving of the amount of fertilizer to be ap-phed by 20%-30% for the same level of yield,or an increase of the crop yield by over 10% for the same level of ni-tregen fertilization;in addition,it was found to show usually a function of promoting the crop to early mature.It can be apptied as basal dressing all in one time to soil and thus also used as a labour-saving and crop yield-increasing fertil-izer for is non-mtertillage,plastics film covering and water-saving agriculture     

Halogenated arenes in the Duff reaction at high pressures

The reaction of fluorobenzene with urotropine in trifluoroacetic acid (TFAA) at high pressures and temperatures affords predominantly fluorobenzaldehydes andN-(fluorophenylmethyl)trifluoroacetamides. The yields of these products depend considerably on the reaction conditions. The rates of their formation have the maximum values at the momemt of the phase transition (PT) of TFAA. A new efficient cyclic (dynamic) regime is proposed for the synthesis at high pressures. The regime involves periodically occurring PT of the solvent. The change in the relative rate of product formation with the degree of fluorobenzene conversion is wave-like.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 319–323, February, 1995.     

钴(II)-联吡啶-α-氨基酸的热力学和动力学研究

关于联吡啶为第一配体的二元、三元配合物的热力学和动力学性质的研究,以铜（Ⅱ）作为中心离子最为多见,而以钴（Ⅱ）作为中心离子的报导较少．实验表明,过渡金属钻（Ⅱ）能与大多数的生物配体、大π共轭体系形成相当稳定的二元、三元配合物,是生物功能模拟的一个具有应用价值的中心离子·钴（Ⅱ）卟啉可以代替铁（Ⅱ）卟啉,模拟血红蛋白、肌红蛋白[1],在生物体内起到输送氧的作用．为了充分了解钴（Ⅱ）与生物配体的配伍能力、配位方式以及其配位过程的动态行为,为推动钴（Ⅱ）配合物及其生物功能的模拟研究,本文分别采用PH电位法…     

束-气条件下He(23S)与CH3Cl及CH3I的传能研究

在束-气条件下，通过检测产物的化学发光，研究了亚稳电子激发态He（23S）原子与CH3Cl、CH3I传能反应.采用参比反应的方法，测得了由上述反应产生的主要碎片CH（A2△）、CH（B2∑-）、CH（C2∑+）和H*形成速率常数．通过对测得的CH（A2△－X2∏r）和CH（B2∑-－X2∏r）色散谱进行计算机模拟，获得了初生态的CH（A2△，v＝0－2）和CH（B2∑-，v＝0态）的振动-转动布居，实验结果表明，CH（A2△，v＝0）态的转动布居是呈双Boltzman分布的，并且反应的可资用能大部分将转变成产物的平动能．根据实验结果和反应阈能的分析，本文对He（23S）与CH3Cl／CH3I传能反应机理进行了探讨。     

A quality systems approach for identifying and controlling sources of error with point of care testing devices

Historically, due to the size and nature of the instrumentation, highly skilled laboratory professionals performed clinical testing in centralized laboratories. Today’s clinicians demand realtime test data at the point of care. This has led to a new generation of compact, portable instruments permitting ”laboratory” testing to be performed at or near the patient’s bedside by nonlaboratory workers who are unfamiliar with testing practices. Poorly controlled testing processes leading to poor quality test results are an insidious problem facing point of care testing today. Manufacturers are addressing this issue through instrument design. Providers of clinical test results, regardless of location, working with manufacturers and regulators must create and manage complete test systems that eliminate or minimize sources of error. The National Committee for Clinical Laboratory Standards (NCCLS) in its EP18 guideline, ”Quality management for unit-use testing,” has developed a quality management system approach specifically for test devices used for point of care testing (POCT). Simply stated, EP18 utilizes a ”sources of error” matrix to identify and address potential errors that can impact the test result. The key is the quality systems approach where all stakeholders – professionals, manufacturers and regulators – collaboratively seek ways to manage errors and ensure quality. We illustrate the use of one quality systems approach, EP18, as a means to advance the quality of test results at point of care. Received: 26 June, 2002 Accepted: 17 July 2002 Presented at the European Conference on Quality in the Spotlight in Medical Laboratories, 7–9 October 2001, Antwerp, Belgium Abbreviations NCCLS National Committee for Clinical Laboratory Standards (formerly) · POCT point of care testing · QC quality control · HACCP hazard analysis critical control points · CLIA clinical laboratory improvement amendments (of 1988) Correspondence to S. S. Ehrmeyer