圆柱型正交各向异性圆形薄板的非线性非对称弯曲问题（Ⅱ）

本文利用“正则摄动法”［２］研究文献［１］中由“两变量法”［３］所得到的关于Ｗｎｍ，和的递推方程和递推边界条件的求解问题。求得了本问题的一致有效渐近解，最后作为实例，我们利用“混合摄动法”［４］研究了轴对称线性弯曲问题，并将所得结果与文献［５］中给出的精确解相比较，两者基本上是一致的。     

双折射双频激光器偏振特性的分析

用激光原理和晶体光学原理分析了腔内加旋光晶体的激光器输出光的偏振特性，实验和分析表明，激光器输出两束不同频率的垂直线偏振光，激光器两端输出光的偏振面有一夹角ａ，且此夹角与晶轴和传光方向的夹角θ有关。理论计算结果在双折射双频激光器的实验结果符合很好。     

微通道板增益疲劳机理研究

微通道板的增益疲劳是微通道板的主要问题之一，本文分析了微通道板的表面结构模型，同通道板活性表面上碱金属的逸出和碳的增加是导致微通道板的增益疲劳的主要原因，另外，探讨碱金属逸出的机理和碳污染的来源，介绍延长微通道板工作寿命的有效方法。     

An extended continuous Newton method

This paper describes a numerical realization of an extended continuous Newton method defined by Diener. It traces a connected set of locally one-dimensional trajectories which contains all critical points of a smooth functionf: ⁿ . The results show that the method is effectively applicable.The authors would like to thank L. C. W. Dixon for pointing out some errors in the original version of this paper and for several suggestions of improvements.     

Markovian network processes: Congestion-dependent routing and processing

A Markovian network process describes the movement of discrete units among a set of nodes that process the units. There is considerable knowledge of such networks, often called queueing networks, in which the nodes operate independently and the routes of the units are independent. The focus of this study, in contrast, is on networks with dependent nodes and routings. Examples of dependencies are parallel processing across several nodes, blocking of transitions because of capacity constraints on nodes, alternate routing of units to avoid congestion, and accelerating or decelerating the processing rate at a node depending on downstream congestion. We introduce a general network process representing the numbers of units at the nodes and derive its equilibrium distribution. This distribution takes the form of a product of functions of vectors in which the arguments of the functions satisfy an interchangeability property. This new type of distribution may apply to other multi-variate processes as well. A basic idea in our approach is a linking of certain micro-level balance properties of the network routing to the processing rates at the nodes. The link is via routing-balance partitions of nodes that are inherent in any network. A byproduct of this approach is a general characterization of blocking of transitions without the restriction that the process is reversible, which had been a standard assumption. We also give necessary and sufficient conditions under which a unit moving in the network sees a time average for the unmoved units (called the MUSTA property). Finally, we discuss when certain flows between nodes in an open network are Poisson processes.This research was sponsored in part by Air Force Office of Scientific Research contract 84-0367.     

Industrial multi-stage continuous filtration process: influence of operating parameters

This paper presents a theoretical study of the effects of operating parameters on the behaviour of an industrial crossflow filtration unit. A continuous three stage unit and its application to yeast cell harvesting are considered. A model of standard industrial processing is developed, and the influence of dead volumes, start-up procedure, crossflow and permeation velocities and maximum transmembrane pressure are investigated. Concentration factors are discussed with respect to the effects due to dead volumes.     

Indirect automatic atomic absorption determination of sulphate based on its precipitation with barium

A continuous precipitation flame atomization atomic absorption spectrometric method for the indirect determination of sulphate is proposed. By using a reversed flow-injection configuration for precipitation as barium sulphate, this anion was determined in the range 10–150 g/ml, with a relative standard deviation of 2.6%. The sensitivity was increased by a factor of seven by using a nitrous oxide-acetylene flame to measure barium.     

Reaction Engineering Aspects of α-l,4-D-Glucan Phosphorylase Catalysis

Some important process properties of α-l,4-D-ghican phosphorylases isolated from the bacteriumCorynebacterium callunae and potato tubers (Solatium tuberosum) were compared. Apart from minor differences in their stability and specificity (represented by the maximum degree of maltodextrin conversion) and a 10-fold higher affinity of the plant phosphorylase for maltodextrin (K _M of 1.3 g/L at 300 mM of orthophosphate), the performances of both enzymes in a continuous ultrafiltration membrane reactor were almost identical. Product synthesis was carried out over a time course of 300–400 h in the presence or absence of auxiliary pullulanase (increasing the accessibility of the glucan substrate for phosphorolytic attack up to 15–20%). The effect of varied dilution rate and reaction temperature on the resulting productivities was quantitated, and a maximum operational temperature of 40°C was identified.     

Deposition of Oral Bacteria and Polystyrene Particles to Quartz and Dental Enamel in a Parallel Plate and Stagnation Point Flow Chamber

The aim of this paper is to determine to what extent (i) deposition of oral bacteria and polystyrene particles, (ii) onto quartz and dental enamel with and without a salivary conditioning film, (iii) in a parallel plate (PP) and stagnation point (SP) flow chamber and at common Peclet numbers are comparable. All three bacterial strains showed different adhesion behaviors, and even Streptococcus mitis BMS, possessing a similar cell surface hydrophobicity as polystyrene particles, did not mimic polystyrene particles in its adhesion behavior, possibly as a result of the more negative ζ potentials of the polystyrene particles. The stationary endpoint adhesion of all strains, including polystyrene particles, was lower in the presence of a salivary conditioning film, while also desorption probabilities under flow were higher in the presence of a conditioning film than in its absence. Deposition onto quartz and enamel surfaces was different, but without a consistent trend valid for all strains and polystyrene particles. It is concluded that differences in experimental results exist, and the process of bacterial deposition to enamel surfaces cannot be modeled by using polystyrene particles and quartz collector surfaces.     

Optimum gas chromatographic conditions in wall-coated capillary columns. Extended and simplified forms of the Golay-equation

Band broadening in capillary columns is satisfactorily described by the Golay-equation extended to situations of appreciable pressure drop by Giddings. In practice, however, several simplifications are often made. The effect of these simplifications on the calculated values of the minimum plate height and optimum carrier gas velocity are treated systematically.