2′,4′-BNA/LNA with 9-(2-Aminoethoxy)-1,3-diaza-2-oxophenoxazine Efficiently Forms Duplexes and Has Enhanced Enzymatic Resistance**

Artificial nucleic acids are widely used in various technologies, such as nucleic acid therapeutics and DNA nanotechnologies requiring excellent duplex-forming abilities and enhanced nuclease resistance. 2′-O,4′-C-Methylene-bridged nucleic acid/locked nucleic acid (2′,4′-BNA/LNA) with 1,3-diaza-2-oxophenoxazine (BNAP ( B^H )) was previously reported. Herein, a novel B^H analogue, 2′,4′-BNA/LNA with 9-(2-aminoethoxy)-1,3-diaza-2-oxophenoxazine (G-clamp), named BNAP-AEO ( B^AEO ), was designed. The B^AEO nucleoside was successfully synthesized and incorporated into oligodeoxynucleotides (ODNs). ODNs containing B^AEO possessed up to 10⁴-, 152-, and 11-fold higher binding affinities for complementary (c) RNA than those of ODNs containing 2′-deoxycytidine ( C ), 2′,4′-BNA/LNA with 5-methylcytosine ( L ), or 2′-deoxyribonucleoside with G-clamp ( P^AEO ), respectively. Moreover, duplexes formed by ODN bearing B^AEO with cDNA and cRNA were thermally stable, even under molecular crowding conditions induced by the addition of polyethylene glycol. Furthermore, ODN bearing B^AEO was more resistant to 3′-exonuclease than ODNs with phosphorothioate linkages.     

避雷器电阻片测试系统设计

采用工业PC机与可编程控制器、示波器、直流仪等设备设计了避雷器电阻片测试系统,阐述了本系统的控制流程及逻辑关系,用图形化编程语言编写了上位机软件,完成了避雷器电阻片在 U_1mA及0.75U_1mA下的漏电流等参数的测试,并对电阻片测试过程中的电压峰值、电流峰值进行采集存储,还存储了电阻片在整个测试过程中的能量,方便以后对测试过程中损坏的阀片进行能量、电流峰值、电压峰值方面的分析,对系统进行了初步的试验,结果表明该系统运行效果良好,实现了避雷器电阻片出厂前的测试,提高了测试效率。     

Density functional study of α-graphyne derivatives: Energetic stability,atomic and electronic structure

The energetic stability, atomic and electronic structures of α-graphyne and its derivatives (α-GYs) with extended carbon chains were investigated by density functional (DF) calculations in this work. The studied α-GYs consist of hexagon carbon rings sharing their edges with carbon atoms N=1–10. The structure and energy analyses show that α-GYs with even-numbered carbon chains have alternating single and triple C–C bonds (polyyne), energetically more stable than those with odd-numbered carbon chains possessing continuous double C–C bonds (polycumulene). The calculated electronic structures indicate that α-GYs can be either metallic (odd N) or semiconductive (even N) depending on the parity of number of atoms on hexagon edges despite the edge length. The semiconducting α-graphyne derivatives are found to possess Dirac cones (DC) with small direct band gaps 2–40 meV and large electron velocities 0.554×10⁶–0.671×10⁶ m/s, 70–80% of that of graphene. Our DF studies suggest that introducing sp carbon atoms into the hexagon edges of graphene opens up an avenue to switch between metallic and DC electronic structures via tuning the parity of the number of hexagon edge atoms.     

Analytical and empirical studies on the characteristic resistances of no-insulation GdBCO racetrack pancake coil under various operating currents

This paper presents the effects of the Lorentz force on the electrical behaviors of the no-insulation (NI) GdBCO racetrack pancake (RP) coil without turn-to-turn insulation by performing charging/discharging and sudden-discharging tests. The simulation results of the 2-dimensional finite element method showed that the Lorentz forces were generated towards the center of the winding pack consisting of 60-turn GdBCO CCs, which could enhanced the turn-to-turn contact within the RP coil. The charging/discharging test results indicated that the characteristic resistance (R_c) of the NI RP coil decreased with increasing operating current, which was caused by an increase of the Lorentz force. Further, the results of the sudden-discharging tests exhibited that the Lorentz force was dissipated instantly during the sudden-discharge of the coil, since the operating current immediately decreased to zero. Overall, this study clearly demonstrated that the Lorentz force induced by the operating current exerts the electrical behaviors of an NI RP coil.     

Electrode metal penetration of amorphous indium gallium zinc oxide semiconductor thin film transistors

Penetration effects of various electrode materials, namely Al, Au, and Cu, on the physical and electrical characteristics of amorphous oxide semiconductor thin film transistors (TFTs) were investigated. Amorphous indium gallium zinc oxide (a-IGZO) TFTs were fabricated with conventional staggered bottom gate structures on a p-type Si substrate. X-ray photoemission spectroscopy (XPS) analysis under the electrode deposition area revealed variations in the oxygen bonding states and material compositions of the a-IGZO layer. Field-emission scanning electron microscopy (FE-SEM) with the line scan of energy dispersive spectroscopy (EDS) showed lateral penetration by the electrode metal. To compare the electrical characteristics of the tested TFTs, the initial current–voltage (I–V) transfer characteristics were examined. In addition, the tested TFTs fabricated using various electrode materials were tested under bias stress to verify the correlations between variations in TFT characteristics and both the metal work function and penetration-induced oxygen vacancies in the channel around the contact area.     

车用塑料耐刮擦测试方法概述

耐刮擦测试是汽车内外饰塑料零件质量控制的一项重要指标。介绍了耐刮擦测试原理,刮擦头、负载、样品与刮擦头相对运动状态等是决定测试方法的关键技术要素,评价塑料耐刮擦性的方法分为目视法及仪器测量法。综述了五指刮擦法、硬度试验笔刮擦法、网格刮擦法、摩擦色牢度刮擦法及其他刮擦法测试方法,分析和总结了不同测试方法的特点和应用范围。     

无机硅酸盐涂料的研制及应用

以硅酸盐溶液为主要原料,利用少量自制的含偶联功能基团的有机硅聚合物乳液与硅酸盐进行杂化反应,同时与填料等有效的结合制备了无机硅酸盐涂料,并对涂料的性能进行研究。结果表明：制备的无机硅酸盐涂层具有优异的贮存稳定性、柔韧性、防水性、耐污性、阻燃性以及耐霉菌性等,满足建筑内外墙涂料的相关标准要求。     

Investigation of a Photochromic Diarylethene with Electron-acceptor Attached

In this contribution, an electron acceptor attached diarylethene derivative was synthesized and fully characterized. The photochromic behavior was investigated in THF. Under exposure of UV and visible light cycles, the solution color can be switched between colorless and yellow smoothly. Fatigue resistance measurements could be repeated 50 times with an acceptable degradation. Due to the electron acceptor attached to the framework of diarylethene, the photo- and thermal-stability were enhanced both. A full-photo mode switch can be established based on the well-defined states by external excitation. The molecular structures of ring-open and ring-closed form were optimized by Dmol³. The distance between photocyclizing atoms in aptiparallel conformation meets the requirement for photochromic reaction. And the calculated absorption wavelengths were also in agreement with the experimental values.     

Qualitative spectroscopic characterization of the matrix–silane coupling agent interface across metal fibre reinforced ion exchange resin composite membranes

The characterization of novel metal reinforced electro-dialysis ion exchange membranes, for water desalination, by attenuated total reflectance Fourier transform infrared spectroscopy mapping is presented in this paper. The surface of the porous stainless steel fibre meshes was treated in order to enhance the amount of surface oxide groups and increase the material hydrophilicity. Then, the metal membranes were functionalized through a sol–gel reaction with silane coupling agents to enhance the affinity with the ion exchange resins and avoid premature metal oxidation due to redox reactions at the metal–polymer interface. Polished cross sections of the composite membranes embedded into an epoxy resin revealed interfaces between metallic frameworks and the silane layer at the interface with the ion exchange material. The morphology of the metal–polymer interface was investigated with scanning electron microscopy and Fourier transform infrared micro-spectroscopy. Fourier transform infrared mapping of the interfaces was performed using the attenuated total reflectance mode on the polished cross-sections at the Australian Synchrotron. The nature of the interface between the metal framework and the ion exchange resin was shown to be homogeneous and the coating thickness was found to be around 1 μm determined by Fourier transform infrared micro-spectroscopy mapping. The impact of the coating on the properties of the membranes and their potential for water desalination by electro-dialysis are also discussed.