Facets for the cut cone I

We study facets of the cut coneC _n , i.e., the cone of dimension 1/2n(n – 1) generated by the cuts of the complete graph onn vertices. Actually, the study of the facets of the cut cone is equivalent in some sense to the study of the facets of the cut polytope. We present several operations on facets and, in particular, a lifting procedure for constructing facets ofC _n+1 from given facets of the lower dimensional coneC _n . After reviewing hypermetric valid inequalities, we describe the new class of cycle inequalities and prove the facet property for several subclasses. The new class of parachute facets is developed and other known facets and valid inequalities are presented.     

Analytical chemistry and the cone penetrometer: In situ chemical characterization of the subsurface

The development of novel microanalytical techniques forin situ chemical characterization of the terrestrial subsurface environment has grown significantly over the last decade, particularly those instruments that are interfaced to the cone penetrometer. Cone penetrometer testing (CPT) has emerged as an effective means to introduce samplers and probes forin situ analysis of contaminants in soil and groundwater matrices. A variety ofin situ chemical samplers for CPT have been developed that can be driven into the subsurface to collect soil gas, groundwater, or soil samples at depth, thus providing a means of determining the vertical and horizontal extent of contamination. Cone penetrometer testing is also being explored as a means to deliverin situ subsurface sensor probes, including probes based on laser-induced fluorescence, Raman, and infrared spectroscopies for organics; on laser-induced breakdown and X-ray fluorescence spectroscopies for heavy metals; and on passive gamma-ray spectroscopy for radionuclides. The range of analytical technologies used in CPT for the determination of organic and inorganic species in the subsurface is described.     

Banach空间半线性发展方程的周期解

把上、下解方法引入到有序Ｂａｎａｃｈ空间中的半线性发展方程周期解问题，利用正算子半群特征与单调迭代程序，获得了最大周期解与最小周期解的存在性．所得的结果概括和推广了常微分方程与偏微分方程中的有关结论     

高温超导电缆终端预制式应力锥的设计与分析

高温超导电缆终端是高温超导电缆系统的重要组成部分。借鉴常规电缆终端预制式应力锥的设计理论,结合高温超导带材的特殊工作特性,选用耐低温的绝缘材料,对高温超导电缆终端预制式应力锥进行设计。运用有限元分析软件ANSYS对设计的高温超导电缆终端预制式应力锥进行建模和仿真计算,得到终端处的电场和电位分布,并将仿真结果和理论计算结果进行对比分析,验证设计的可行性,为进一步的研究奠定了基础。     

Conformational properties of propargyloxy-calix[4]arene tricarboxamides: NMR and DFT studies on the O-through-the-annulus rotation

The size limit of substituents allowing O-through-the-annulus rotation of substituted calix[4]arenes was further extended to the propargyloxy group in 24-propargyloxy-25,26,27-tris(N,N-dimethylcarbamoylmethoxy)-p-tert-butylcalix[4]arene by demonstrating its free but slow motion affording equilibrium between the partial cone and 1,2-alternate conformers. The effect of solvent and upper rim substituents R¹ on the conformational inversion was investigated by means of ¹H NMR. The rotational isomerisation of the parent (R¹ = H) analogue could not unambiguously be detected. The experimental results were supported by comprehensive density functional theory studies.     

Contingent derivatives and regularization for noncoercive inverse problems

Abstract

We study the inverse problem of parameter identification in noncoercive variational problems that commonly appear in applied models. We examine the differentiability of the set-valued parameter-to-solution map using the first-order and the second-order contingent derivatives. We explore the inverse problem using the output least-squares and the modified output least-squares objectives. By regularizing the noncoercive variational problem, we obtain a single-valued regularized parameter-to-solution map and investigate its smoothness and boundedness. We also consider optimization problems using the output least-squares and the modified output least-squares objectives for the regularized variational problem. We give a complete convergence analysis showing that for the output least-squares and the modified output least-squares, the regularized minimization problems approximate the original optimization problems suitably. We also provide the first-order and the second-order adjoint method for the computation of the first-order and the second-order derivatives of the output least-squares objective. We provide discrete formulas for the gradient and the Hessian calculation and present numerical results.     

Study on properties of flame‐retardant cyanate esters modified with DOPO and triazine compounds

Ternary flame‐retardant modified cyanate ester blends (CEPG and CEPA) are formed by combining triazine compounds (TGIC or TAIC) and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide with cyanate ester resin. The curing behaviors, thermal and mechanical properties, and the flame‐retardant properties are investigated. The results show that the CEPG and CEPA blends result in lower curing temperatures and glass transition temperatures than those of neat CE. Both of CEPG and CEPA blends significantly improve the flame‐retardant properties of CE resins, and UL‐94V‐0 rate is achieved for CEPG‐1.0 and CEPA‐0.5. The dielectric constant and loss of CEPA blends are lower than those of CEPG blend with the same phosphors content, and both of them are lower than those of neat CE. Therefore, the ternary flame‐retardant modified cyanate ester blends provide 2 ways for composites of producing printed circuit board with high flame‐retardant property and low dielectric constant and loss.     

Density functional study of α-graphyne derivatives: Energetic stability,atomic and electronic structure

The energetic stability, atomic and electronic structures of α-graphyne and its derivatives (α-GYs) with extended carbon chains were investigated by density functional (DF) calculations in this work. The studied α-GYs consist of hexagon carbon rings sharing their edges with carbon atoms N=1–10. The structure and energy analyses show that α-GYs with even-numbered carbon chains have alternating single and triple C–C bonds (polyyne), energetically more stable than those with odd-numbered carbon chains possessing continuous double C–C bonds (polycumulene). The calculated electronic structures indicate that α-GYs can be either metallic (odd N) or semiconductive (even N) depending on the parity of number of atoms on hexagon edges despite the edge length. The semiconducting α-graphyne derivatives are found to possess Dirac cones (DC) with small direct band gaps 2–40 meV and large electron velocities 0.554×10⁶–0.671×10⁶ m/s, 70–80% of that of graphene. Our DF studies suggest that introducing sp carbon atoms into the hexagon edges of graphene opens up an avenue to switch between metallic and DC electronic structures via tuning the parity of the number of hexagon edge atoms.     

A review of mobility metrics for next generation vehicle mobility models

In the United States, the NATO Reference Mobility Model (NRMM) has been used for evaluating military ground vehicle mobility and the Vehicle Cone Index (VCI) has been selected as a mobility metric. VCI represents the minimum soil strength required for a vehicle to consistently make a specific number of passes, usually one or fifty passes. In the United Kingdom, the Mean Maximum Pressure (MMP) has been adopted as a metric for assessing military vehicle cross-country mobility. MMP is the mean value of the maxima occurring under all the wheel stations of a vehicle. Both VCI and MMP are empirically based. This paper presents a review of the basis upon which VCI and MMP were developed, as well as their applications to evaluating vehicle mobility in practice. With the progress in terramechanics and in modelling and simulation techniques in recent years, there is a growing desire to develop physics-based mobility metrics for next generation vehicle mobility models. Based on the review, criteria for selecting physics-based mobility metrics are proposed. Following these criteria, metrics for characterizing military vehicle traction limits and traversability on a given operating area are recommended.