Ionic mobility data for multicomponent electrolyte systems at low concentrations are scarce due to experimental difficulties and are actually restricted to aqueous solutions of alkali chlorides. Some new results are presented which have been obtained by using a radiotracer method valid even if one of the ionic species is present at very low concentrations (tracer ion). The following electrolyte systems (two electrolytes with a common ion in a solvent) have been investigated at a 0.5N total ionic strength: NaNO3–AgNO3, KNO3–AgNO3, LiNO3–AgNO3 either in pure water or in water-rich (acetonitrile or dimethylsulfoxide) mixed solvents. Since ionic conductivity data processing by an extended law generalized to mixtures, such as that proposed by Quint and Viallard, has proved to be delicate to handle, our experimental results have been compared with the qualitative predictions of the classical Onsager-Fuoss limiting law. The main conclusion of this work is to give clear experimental evidence of the inability of any continuum theory to predict the ionic mobilities when solvent structural effect have to be taken into account. Consequently, the ionic behavior, particularly that of the Ag+ ion, has been interpreted in terms of preferential solvation and solvent microscopic structure. The trace mobility measurements reflect the maximum structural effect on the ionic transport properties. 相似文献
This work deals with uncertainty analysis of the thermal conductivity measurement using the transient hot wire method. The characterization is made from a sample of low-density, polyethylene BRALEN SA 200-22. The utilized experimental data are obtained from the test measurements performed on the air at room temperature. The sources of measurement errors are analyzed and the uncertainty of the measured value of the thermal conductivity is evaluated. The analysis shows that in the present case the uncertainty of the thermal conductivity measurement is about ±3.3% for 68% confidence level.This revised version was published online in November 2005 with corrections to the Cover Date. 相似文献
The heat transfer mechanisms in inorganic hollow micro-spheres filled polymer composites are analyzed in the present paper. This heat transfer includes mainly three mechanisms: (1) thermal conduction between solid and gas; (2) thermal radiation between the hollow micro-sphere surfaces; and (3) natural thermal convection of the gas in the micro-hollow spheres. A theoretical model of heat transfer in polymer/inorganic hollow micro-sphere composites is established based on the law of minimal thermal resistance and the equal law of the specific equivalent thermal conductivity, and a corresponding equation of effective thermal conductivity is derived. The effective thermal conductivity (keff) of hollow glass bead-filled polypropylene composites is estimated by using this equation, and is compared with the numerical simulations by means of a finite element method. The results show that the variation of the theoretical estimations of keff are similar to the numerical simulations at lower filler volume fraction (φf20%). Moreover, keff decreases linearly with increasing φf, and reduces somewhat with increase of filler size. 相似文献
Thick films of pure polyvinyl alcohol and polyvinyl alcohol doped with silver nitrate with different compositions have been
prepared by solution cast technique. The FT-IR spectrum confirms the complexation process. The conductivity of the pure polyvinyl
alcohol is of the order of 10−7 Sm−1 at 90 °C, and its value increases by two orders of magnitude when doped with 20 wt% of AgNO3. The activation energy, calculated from the Arrhenius plot for all compositions of the poly vinyl alcohol doped with silver
nitrate, is between 0.24 and 0.35 eV. The migration energy for the ion in polymer electrolyte has been calculated from the
modulus spectrum, and is in good agreement with the activation energy calculated from the Arrhenius plot. The modulus spectra
indicate the non-Debye nature of the material. 相似文献
There is currently a major issue with the calibration of conductivity meters used for high purity water: the lack of availability of a reference material or reference methods for low conductivity ranges (conductivity below 1 S cm–1 at 25.0 °C, resistivity >1 M cm at 25.0 °C). This paper describes the current status of conductivity measurements in high purity water. A new and improved approach, currently being investigated, should allow us to make the calibration of conductivity meters used for low conductivity ranges traceable to the SI.Milipore, Milli-Q and Elix are registered trademarks of Millipore Corporation. 相似文献
In this paper, perovskite oxide SmCoO3 was prepared by the solid-state reaction method using Co2O3 and Sm2O3 as raw materials. The structure and properties of the samples were investigated by XRD, Raman spectral techniques, and DC
measurements and so on. The results of XRD and Raman spectra showed that the mixtures of Co2O3 and Sm2O3 can react to produce a single phase perovskite oxide SmCoO3 around 1353 K. The single-phase SmCoO3 changes from an insulator to a semi-conductor and transition occurs around 470 K. The thermal expansion coefficient (2.17
× 10−5 K−1) of the single-phase SmCoO3 is approximately equal to that of doped LaGaO3, but much bigger than that of SDC(Ce0.85Sm0.15O2) above 873 K. 相似文献
In this work, 4-diethanolaminomethyl styrene (DEAMSt) monomer was prepared by modification of 4-chloromethyl styrene with diethanolamine. The homopolymerization of styrene modificated was carried out by free radical polymerization method at 60?°C in presence of 1,4-dioxane and AIBN. The metal complexes were prepared by reaction of the homopolymer used as ligand P(DEAMSt)Ll and Ni(II), Co(II) metal ions in presence of ethanol and dilute NaOH at 65?°C for 48?h in pH 6.
The structure of modificated monomer, homopolymer used as ligand and polymer-metal complexes were characterized by (FT-IR), 1H-NMR, 13C-NMR, Raman spectroscopy tecniques, elemental analysis, SEM, XRD and magnetic measurements. Their geometric structures according to magnetic measurements of Co(II) and Ni(II) complexes were estimated that have a tetrahedral structure. P(DEAMSt)Ll polymer has a transition state between amorphous and crystalline, whereas metal complexes (Co(II) and Ni(II) are with a large crystal structure. The molecular weight of P(DEAMSt)L1 homopolymer was determined by gel permeation chromatography (GPC). The glass transition temperature (Tg) of homopolymer was measured by differantial scanning calorimeter (DSC). The thermal behaviors of both ligand and polymer-metal complexes were investigated by thermogravimetric analysis (TGA) and (DTA). The results obtained were compared with each other. Then, the dielectrical measurements (dielectric constant, dielectric loss and conductivity) of the ligand and polymer-metal complexes were investigated as a function of temperature and frequency. The activation energies (Ea) of the ligand and metal complexes were determined from the conductivity measurements. 相似文献
The change in semiconductive properties of β-apo-8′-carotenal, astacene and methyl bixin on adsorption of various vapours
on the crystallite surfaces has been studied at a constant sample temperature. The adsorption of vapours enhances the semiconductivity
of the polyenes appreciably. This enhancement depends on the chemical nature and also on the pressure of the adsorbed vapour.
The adsorption and desorption kinetics follow the modified Roginsky-Zeldovich relation. A two stage desorption process, the
first stage of which gives a Lennard-Jones potential energy curve and is followed by a rate-determining transition over a
potential energy barrier to the second stage of adsorption forming weakly bound complexes between the vapour molecules and
the polyene crystallites, can explain satisfactorily the experimentally observed kinetic data. 相似文献
The sphene-type solid electrolyte with high ionic conductivity has been designed for solid-state lithium metal battery. However, the practical applications of solid electrolytes are still suffered by the low relative density and long sintering time of tens of hours with large energy consumption. Here, we introduced the spark plasma sintering technology for fabricating the sphene-type Li1.125Ta0.875Zr0.125SiO5 solid electrolyte. The dense electrolyte pellet with high relative density of ca. 97.4% and ionic conductivity of ca. 1.44×10-5 S/cm at 30℃ can be obtained by spark plasma sintering process within the extremely short time of only ca. 0.1 h. Also the solid electrolyte provides stable electrochemical window of ca. 6.0 V(vs. Li+/Li) and high electrochemical interface stability toward Li metal anode. With the enhanced interfacial contacts between electrodes and electrolyte pellet by the in-situ formed polymer electrolyte, the solid-state lithium metal battery with LiFePO4 cathode can deliver the initial discharge capacity of ca. 154 mA·h/g at 0.1 C and the reversible capacity of ca. 132 mA·h/g after 70 cycles with high Coulombic efficiency of 99.5% at 55℃. Therefore, this study demonstrates a rapid and energy efficient sintering strategy for fabricating the solid electrolyte with dense structure and high ionic conductivity that can be practically applied in solid-state lithium metal batteries with high energy densities and safeties. 相似文献