乙醇-环己烷体系中NaI活度系数的测定与计算

由于非水溶剂的应用日趋广泛,促使物理化学工作者对于溶剂和溶液性质进行研究,同时开展了有关物理化学数据的测定和积累工作,以利于指导实践[1]。目前文献报道含水混合溶剂中的电解质活度系数较多,但非水混合溶剂中电解质活度系数报道较少。电解质浓溶液活度系数的计算方法目前应用较广的是Pitzer半经验算法[2]。Pitzer的算法中具体物系的β(0)、β(1)等系数需从实测活度系数数据拟合求得。孙仁义等通过测定汽液平衡盐效应的方法研究了盐在混合溶剂中的活度系数[3-4]。最近孙仁义等[5]提出了双液比固定条件下含盐体系汽液平衡数据热力学一…     

气溶胶前向散射大气能见度测量系统传递系数的标定及校准方法

分析了气溶胶的前向角散射特性,利用标准的大气透射仪标定前向散射大气能见度测量系统的传递系数。当系统结构发生变化时,传递系数也随之改变,为保证系统测量的准确性和简化系统传递系数的标定过程,提出了一种利用标准漫透射板校准系统传递系数的方法。该方法使用了两块具有相同透射系数的漫透射板,使气溶胶粒子团在前向半球上产生漫散射,此时探测器的测量值即为包含了仪器常数的定值。当系统结构改变时,这个测量值相对于原测量值的变化率作为比例系数代入系统传递系数的计算,实现校准。     

约束最小二乘估计的优良性

对于线性模型y=Xθ ε,ε服从椭球等高单峰分布,未知参数θ满足不等式约束a′θ≥0,证明了在参数估计优良性的集中概率准则下,θ的约束最小二乘估计θ~*优于最小二乘估计θ.     

ANALYTICAL SOLUTIONS TO STRESS CONCENTRATION PROBLEM IN PLATES CONTAINING RECTANGULAR HOLE UNDER BIAXIAL TENSIONS

The stress concentration problem in structures with a circular or elliptic hole can be investigated by analytical methods. For the problem with a rectangular hole, only approximate results are derived. This paper deduces the analytical solutions to the stress concentration problem in plates with a rectangular hole under biaxial tensions. By using the U-transformation technique and the finite element method, the analytical displacement solutions of the finite element equations are derived in the series form. Therefore, the stress concentration can then be discussed easily and conveniently. For plate problem the bilinear rectangular element with four nodes is taken as an example to demonstrate the applicability of the proposed method. The stress concentration factors for various ratios of height to width of the hole are obtained.     

用于检测水环境中银离子浓度的荧光适体传感器研究

银凭借其独特的性能,在医疗材料、摄影、电子、成像等行业中应用广泛.然而,银离子被列为最具毒性的重金属离子之一,会对环境以及人类的生命健康造成严重威胁.为了灵敏、特异性的检测水环境中的银离子浓度,利用纳米金的优良光学猝灭性以及双链核酸适体捕获银离子能力更强的优点,结合荧光能量共振转移原理,提出一种用于检测水环境中银离子浓...     

基于气体浓度定量的嗅觉刺激器优化设计

现有的基于磁共振测量的嗅觉刺激器,通过调节嗅剂液体浓度的方法可以实现不同浓度的嗅觉刺激,但随着实验进行,受到嗅剂挥发以及实验环境（温度、湿度、气流量）变化的影响,很难确保输送至鼻腔的嗅剂气体浓度的稳定性,进而影响实验结果的准确性．本研究对本实验室前期开发的嗅觉刺激装置进行改进,实现了气体浓度精确定量．改进后的嗅觉刺激器主要分为三个部分：控制系统、反馈系统和气路系统．控制系统主要实现气路系统的送气控制和嗅剂气体浓度调节;反馈系统则负责对气体浓度进行测量;气路系统则在原有基础上添加活性炭装置,降低无关因素干扰．装置改进之后,不同气路切换时间为75.2 ms,比原装置减少了1 s,有效提高刺激精度．实验结果显示,气体浓度调节前,300 s内乙醇、吡啶、乙酸戊酯嗅剂气体浓度分别下降6.7%、71.4%、79.2%,嗅剂气体浓度短时间内发生较大改变．加入气体浓度调节功能后,当气体浓度下降至目标浓度的90%时,可通过调节气泵电压改变嗅剂气流与空气气流比例,从而调节嗅剂气体浓度至目标值,其中吡啶、乙酸戊酯用时13 s．     

电极界面浓差极化对锂金属沉积的影响

锂金属作为下一代高能量密度电池的理想负极材料受到研究人员广泛关注。然而,锂枝晶生长引起的安全隐患和循环寿命短等问题严重影响了锂金属电池的实用化进程。本文以电化学现象和理论为依据,从浓差极化角度详细分析锂金属电沉积过程中枝晶生长、死锂形成和全电池失效机制,并对目前研究较多的多孔宿主电极中的浓差极化及枝晶抑制进行分析,提出锂金属界面浓差电池现象。本文得到的结论为研究人员更深入地探究锂金属保护策略提供了理论依据。     

修正的分子连接性指数mL用于氯代苯、醇、酯的QSAR/QSRR研究

在分子拓扑理论的基础上，提出了1个改进的连接性指数气^mL并用气研究了氯代苯、醇、酯的正辛醇-水分配系数及气相色谱保留指数，^mL不仅对这些有机化合物有良好的结构选择性，而且与其正辛醇-水分配系数、气相色谱保留指数有良好的相关性；由方程得出的预测值与实验测定值之间能较好地吻合。     

Fabrication of Alginate-Based O/W Nanoemulsions for Transdermal Drug Delivery of Lidocaine: Influence of the Oil Phase and Surfactant

Transdermal drug delivery of lidocaine is a good choice for local anesthetic delivery. Microemulsions have shown great effectiveness for the transdermal transport of lidocaine. Oil-in-water nanoemulsions are particularly suitable for encapsulation of lipophilic molecules because of their ability to form stable and transparent delivery systems with good skin permeation. However, fabrication of nanoemulsions containing lidocaine to provide an extended local anesthetic effect is challenging. Hence, the aim of this study was to address this issue by employing alginate-based o/w nanocarriers using nanoemulsion template that is prepared by combined approaches of ultrasound and phase inversion temperature (PIT). In this study, the influence of system composition such as oil type, oil and surfactant concentration on the particle size, in vitro release and skin permeation of lidocaine nanoemulsions was investigated. Structural characterization of lidocaine nanoemulsions as a function of water dilution was done using DSC. Nanoemulsions with small droplet diameters (d < 150 nm) were obtained as demonstrated by dynamic light scattering (DLS) and cryo-TEM. These nanoemulsions were also able to release 90% of their content within 24-h through PDMS and pig skin and able to the drug release over a 48-h. This extended-release profile is highly favorable in transdermal drug delivery and shows the great potential of this nanoemulsion as delivery system.     

The Influence of Dopant Concentration on Optical-Electrical Features of Quantum Dot-Sensitized Solar Cell

In this study, TiO₂/CdS/Cd_xCu_1−xSe, TiO₂/CdS/Cd_xMn_1−xSe, and TiO₂/CdS/Cd_xAg_2−2xSe thin films were synthesized by chemical bath deposition for the fabrication of photoanode in quantum-dot-sensitized solar cells. As a result, the structural properties of the thin films have been studied by X-ray diffraction, which confirmed the zinc Blende structure in the samples. The optical films were researched by their experimental absorption spectra with different doping concentrations. Those results were combined with the Tauc correlation to estimate the absorption density, the band gap energy, valence band and conduction band positions, steepness parameter, and electron–phonon interaction. Furthermore, the electrical features, electrochemical impedance spectrum and photocurrent density curves were carried out. The result was used to explain the enhancing performance efficiency.