Solid state NMR characterization of formation of poly(ϵ‐caprolactone)/maghnite nanocomposites by in situ polymerization

Results of multinuclear MAS NMR spectroscopy are reported for poly (ε‐caprolactone)/maghnite nanocomposite formation, with ε‐caprolactone in situ polymerized in the presence of maghnite, a proton exchanged montmorillonite clay. Exfoliated and intercalated materials with different maghnite loading in the range 3–15 wt % were investigated. ¹H NMR evidences Brønsted acid hydroxyl groups in the silicate layers and shows that their broad signal at 7.6 ppm present in the parent clay disappears in the nanocomposite material. ²⁷Al MAS NMR results show that beside the hexacoordinated aluminum signal, two additional peaks corresponding to two different tetrahedral Al sites are present in the clay framework. The NMR signal intensity of only one of them was found to be affected in the nanocomposites compared with the parent maghnite, suggesting that these specific aluminum sites are the reactive ones at the initial stages of the polymerization. However almost no changes occurred in the ²⁹Si NMR spectra, confirming that the polymer grafting, as indicated earlier by atomic force microscopy, took place on the aluminum tetracoordinated sites rather than on the silicon sites. A mechanism of maghnite surface catalyzed polymerization of ε‐caprolactone was proposed, involving Brønsted and Lewis acid sites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3060–3068, 2007     

Simultaneous imaging of the structure and fluorescence of a supramolecular nanostructure formed by the coupling of π‐conjugated polymer chains in the intermolecular interaction

We fabricated a micrometer‐long supramolecular chain in which π‐conjugated polyrotaxane was coupled. A new experimental setup was designed and constructed, and the simultaneous direct imaging of the structure and fluorescent function was achieved. Furthermore, we identified the formation of a polymer intertwined network and observed novel fluorescence due to a long‐range interaction via this intertwined network over a distance of 5 μm or more without quenching over 15 min in the near field. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 801–809, 2006     

微型硅谐振式力传感器的振动分析

介绍了谐振式力传感器的工作原理，并从理论上和实验上对中科院合肥智能所研制的第一代微型硅谐振梁（３×０．４×０．０４５ｍｍ＾３）式测力传感器进行了全面的振动分析，所得结构为其进一步优化设计提供了科学根据，文中使用的实验分析方法，为其它微小物体的动态和识别提供了一条有效途径。     

Adsorption of water molecules in slit pores

We report molecular dynamics (MD) simulations on the adsorption of water in attractive and repulsive slit pores, where the slit and a bulk region are in contact with each other. Water structure, surface force and adsorption behavior are investigated as a function of the overall density in the bulk region. The gas–liquid transition in both types of pores occurs at similar densities of the bulk region.     

A case study in conformation design: learning by doing

Efforts are described to design simple, fully flexible but conformationally preorganised omega-hydroxy-nonanoic acids that could serve as the conformation controlling unit in analogues of the potent protein-kinase C activator aplysiatoxin. Such analogues are macrodilactones incorporating the designed omega-hydroxy-nonanoic acid and 3,4-dihydroxy-pentanoic acid, which contains the pharmacophoric groups. The design process (replacement of CH(2) groups by an oxygen atom, annelation of a six-membered ring and placement of alkyl substituents) of the omega-hydroxy-nonanoic acids was monitored by force-field calculations. In the end of this process simple analogues of aplysiatoxin are proposed in which the proper disposition of the pharmacophoric groups is secured by a conformationally flexible but preorganised template structure as part of the macrodilactone ring.     

Comparative characterisation by atomic force microscopy and ellipsometry of soft and solid thin films

Ellipsometry and atomic force microscopy (AFM) were used to study the film thickness and the surface roughness of both ‘soft’ and solid thin films. ‘Soft’ polymer thin films of polystyrene and poly(styrene–ethylene/butylene–styrene) block copolymer were prepared by spin‐coating onto planar silicon wafers. Ellipsometric parameters were fitted by the Cauchy approach using a two‐layer model with planar boundaries between the layers. The smooth surfaces of the prepared polymer films were confirmed by AFM. There is good agreement between AFM and ellipsometry in the 80–130 nm thickness range. Semiconductor surfaces (Si) obtained by anisotropic chemical etching were investigated as an example of a randomly rough surface. To define roughness parameters by ellipsometry, the top rough layers were treated as thin films according to the Bruggeman effective medium approximation (BEMA). Surface roughness values measured by AFM and ellipsometry show the same tendency of increasing roughness with increased etching time, although AFM results depend on the used window size. The combined use of both methods appears to offer the most comprehensive route to quantitative surface roughness characterisation of solid films. Copyright © 2007 John Wiley & Sons, Ltd.     

Interfacial Adhesion between Fatty Acid Collectors and Hydrophilic Surfaces: Implications for Low-Rank Coal Flotation

Fatty acids, which are enriched in vegetable oil, have attracted much attention in low-rank coal flotation because of their unique chemical structure. In this study, density functional theory calculations, molecular dynamics simulations, and atomic force microscopy were employed to investigate the adsorption structure and forces between collectors and hydrophilic surfaces. The results show that fatty acids can be easily adsorbed onto surfaces through hydrogen bonds, and can cover the oxygen sites. The existence of hydration film on hydrophilic surfaces prevented nonpolar molecules from being able to adsorb, while polar fatty acids could adsorb and expel water molecules. The adhesion force between the RCOOH-terminated probe and the surface appeared in the retraction process, which differed significantly from that of the RCH₃-terminated probe, indicating that polar fatty acids are more suitable as flotation collectors for low-rank coal than nonpolar hydrocarbon oil. The simulation and AFM test revealed the mechanisms of polar fatty acids, and can provide guidance for low-rank coal flotation applications.     

Folding Free Energy Determination of an RNA Three-Way Junction Using Fluctuation Theorems

Nonequilibrium work relations and fluctuation theorems permit us to extract equilibrium information from nonequilibrium measurements. They find application in single-molecule pulling experiments where molecular free energies can be determined from irreversible work measurements by using unidirectional (e.g., Jarzynski’s equality) and bidirectional (e.g., Crooks fluctuation theorem and Bennet’s acceptance ratio (BAR)) methods. However, irreversibility and the finite number of pulls limit their applicability: the higher the dissipation, the larger the number of pulls necessary to estimate ΔG within a few kBT. Here, we revisit pulling experiments on an RNA three-way junction (3WJ) that exhibits significant dissipation and work-distribution long tails upon mechanical unfolding. While bidirectional methods are more predictive, unidirectional methods are strongly biased. We also consider a cyclic protocol that combines the forward and reverse work values to increase the statistics of the measurements. For a fixed total experimental time, faster pulling rates permit us to efficiently sample rare events and reduce the bias, compensating for the increased dissipation. This analysis provides a more stringent test of the fluctuation theorem in the large irreversibility regime.     

非稳态油膜力作用下偏角不对中碰摩转子系统振动特性分析

建立了非稳态油膜力、碰摩力作用下,偏角不对中轴系的横向振动模型,将Jeffcott转子模型推广至约束条件下的轴系振动模型,通过引入转子间的位移约束,由Lagrange方程导出了不对中轴系系统的振动方程.仿真研究表明:由于不对中的存在,轴系横向振动是强非线性、非定常、同时含有自激励、参数激励和外激励的三自由度振动系统;由于从动轴与主动轴的不对中,导致了转轴间的运动约束,使轴系横向振动系统比Jeffcott转子动力学模型所描述的振动系统少了一个自由度.随着偏角不对中量、转轴质量比的变化,系统出现周期、概周期、混沌运动特征.不对中轴系处于概周期运动时,呈现出自激振动特征.其结果可为旋转机械故障诊断、轴系对中及设备的安全运行提供更为准确的理论参考.