羟丙基甲基纤维素作为水泥添加剂研究(四)

以萘磺酸甲醛缩合物为分散剂，水溶性羟丙基甲基纤维素衍生物为粘稠剂，研究了它们的混合物对混凝土材料的分散性与粘稠性及其它性能的影响，并探索了其作用机理。     

A Bregman-Split-Based Compressive Sensing Method for Dynamic Harmonic Estimation

In order to overcome the spectral interference of the conventional Fourier transform in the International Electrotechnical Commission framework, this paper introduces a Bregman-split-based compressive sensing (BSCS) method to estimate the Taylor–Fourier coefficients in a multi-frequency dynamic phasor model. Considering the DDC component estimation, this paper transforms the phasor problem into a compressive sensing model based on the regularity and sparsity of the dynamic harmonic signal distribution. It then derives an optimized hybrid regularization algorithm with the Bregman split method to reconstruct the dynamic phasor estimation. The accuracy of the model was verified by using the cross entropy to measure the distribution differences of values. Composite tests derived from the dynamic phasor test conditions were then used to verify the potentialities of the BSCS method. Simulation results show that the algorithm can alleviate the impact of dynamic signals on phasor estimation and significantly improve the estimation accuracy, which provides a theoretical basis for P-class phasor measurement units (PMUs).     

Influence of metal electrodes on c‐axis orientation of AlN thin films deposited by DC magnetron sputtering

Nanocrystalline aluminum nitride (AlN) thin films were deposited on two types of metallic seed layers on silicon substrates, (111) textured Pt and (110) Mo, by reactive DC magnetron sputtering at low temperature (200 °C). Both textured films of Pt and Mo promote nucleation, thereby improving the crystallinity and epitaxial growth condition for AlN thin films. The deposited films were examined by X‐ray diffraction, scanning electron microscopy and atomic force microscopy techniques. The results indicated that the preferred orientation of crystallites greatly depends upon the kinetic energy of the sputtered species (target power) and seed layers used. Furthermore, AlN thin films with c‐axis perpendicular to the substrate grew on both types of metal electrodes at all power levels larger than 100 W. By comparing the structural properties and compressive stresses at perfect c‐axis orientation conditions, it is evident that AlN films deposited on (110) oriented Mo substrates exhibited superior properties as compared with Pt/Ti seed layers. Furthermore, less values of compressive stresses (?3 GPa) as compared with Pt/Ti substrates (?7.08 GPa) make Mo preferentially better candidate to be employed in the field of suspended Micro/Nano ‐ electromechanical systems (MEMS/NEMS) for piezoelectric devices. Copyright © 2017 John Wiley & Sons, Ltd.     

激光快速烧结合成A(WO4)2(A=Zr2+,Hf2+)的特性研究

利用二氧化碳激光快速凝固技术合成了负热膨胀材料ZrW2O8和HfW2 O8,Raman光谱和X射线衍射分析表明激光烧结合成的ZrW2 O8为正交相,压应力的大小估计在0.4～0.5 GPa之间,激光烧结合成的HfW2 O8,主要为立方晶系,含有极少量的正交系,压应力的大小估计在0.6 GPa左右,这是由于样品在快速凝固的过程中受到了压应力造成的.由于压应力的影响,二氧化碳激光快速凝固技术更适合HfW2O8的制备和合成.     

Compressive advection and multi‐component methods for interface‐capturing

This paper develops methods for interface‐capturing in multiphase flows. The main novelties of these methods are as follows: (a) multi‐component modelling that embeds interface structures into the continuity equation; (b) a new family of triangle/tetrahedron finite elements, in particular, the P₁DG‐P₂(linear discontinuous between elements velocity and quadratic continuous pressure); (c) an interface‐capturing scheme based on compressive control volume advection methods and high‐order finite element interpolation methods; (d) a time stepping method that allows use of relatively large time step sizes; and (e) application of anisotropic mesh adaptivity to focus the numerical resolution around the interfaces and other areas of important dynamics. This modelling approach is applied to a series of pure advection problems with interfaces as well as to the simulation of the standard computational fluid dynamics benchmark test cases of a collapsing water column under gravitational forces (in two and three dimensions) and sloshing water in a tank. Two more test cases are undertaken in order to demonstrate the many‐material and compressibility modelling capabilities of the approach. Numerical simulations are performed on coarse unstructured meshes to demonstrate the potential of the methods described here to capture complex dynamics in multiphase flows. Copyright © 2015 John Wiley & Sons, Ltd.     

钢筋混凝土轴心受压构件的非线性稳定性

采用我国混凝土规范GB50010-2002规定的混凝土应力一应变关系,考虑混凝土强度、构件长细比及混凝土徐变,从构件的非线性理论出发对钢筋混凝土轴心受压构件的承载力进行了研究,给出了混凝土构件临界状态时的构件边缘应变和纵向弯曲系数的计算公式。研究表明,徐变对轴心受压构件的承载力有很大影响。当不考虑混凝土徐变时,按本文公...     

基于压缩感知的一维海面与二维舰船复合后向电磁散射快速算法研究

矩量法作为数值方法中积分方程方法的代表, 具有计算精度高、所用格林函数自动满足辐射条件、无须额外设置边界条件等优点. 但是在舰船目标与海面复合后向电磁散射仿真中, 传统矩量法需针对每个入射角反复求解矩阵方程组, 导致其在处理后向散射问题时计算量大, 耗时长, 仿真效率低下. 为解决上述问题, 本文提出了一种基于压缩感知技术的矩量法的改进算法. 该算法在求解复合后向散射问题时, 首先利用观测矩阵与传统矩量法中的电压矩阵相乘, 得到一组新的低维度的电压矩阵; 其次通过求解新电压矩阵下的矩阵方程组, 获得电流矩阵的观测值; 最后利用恢复算法(本文采用正交匹配追踪算法)重构出所需的原始入射源照射下的电流系数. 通过与传统矩量法的计算结果对比, 表明本文所提算法能够在保证计算精度的前提下, 明显减少计算时间, 提高计算效率.     

多孔脆性介质冲击波压缩破坏的细观机理和图像

本文采用一种具有良好定量性质的离散元模型研究了带孔洞的各向同性脆性介质在细观尺度上的压缩破坏特征. 通过对孤立孔洞、三种简单的孔洞排布方式和大量孔洞随机排布等几种情况的模拟, 认识到了剪切破坏和局域拉伸破坏是冲击波压缩下多孔介质的基本破坏模式; 孔洞之间的损伤贯通会促进孔洞在较低应力下发生塌缩, 但损伤区的应力松弛过程却会对一定范围内的介质起到损伤屏蔽作用; 不同区域中损伤促进和损伤屏蔽的综合效果是在多孔脆性介质中形成一种高损伤区与低损伤区间错排布的奇特损伤分布. 本文的研究结果为深入理解脆性材料冲击波压缩破坏的演化过程和机理提供了细观尺度上的初步物理图像.     

SiO2/炭泡沫和SiC/炭泡沫复合材料的制备及表征

对炭泡沫为支撑骨架的氧化硅气凝胶(SiO₂/炭泡沫)和碳化硅(SiC/炭泡沫)复合材料分别采用XRD、SEM、激光导热仪、万能力学试验机进行物相、微观结构、热学及力学性能方面的表征.结果表明:所制备的SiO₂/炭泡沫与原炭泡沫相比,具备更高的抗压强度(14.95 MPa)和更低的室温热导率(0.44 W·m^-1·K^-1).SiC/炭泡沫材料则保持了较高的抗压强度值(14.66 MPa),其在 1 200 ℃下具备极低的高温热导率(2.18W·m^-1·K^-1).热重分析表明,SiC/炭泡沫在氧化氛围中到610 ℃才发生质量的损失,而内部炭发生完全烧蚀的温度高达844 ℃,这表明该材料的抗氧化性能远好于纯的炭泡沫材料.     

Effect of a Nanoclay on the Mechanical,Thermal and Flame Retardant Properties of Rigid Polyurethane Foam

Water blown rigid polyurethane foams (PUF) with organoclay/organically modified nanoclay (ONC) were prepared and their properties such as density, mechanical, morphological, insulation, thermal and flame retardant properties were studied. In this investigation, the ONC content was varied from 1 to 10 parts per hundred of polyol (php) by weight. It was observed that the compressive strength of ONC filled PUF increased up to 3 php of ONC loading and then it decreased. Wide angle X-ray diffraction and transmission electron microscopy studies indicated the exfoliated dispersion of ONC in PUF. The thermal conductivity of ONC filled PUF decreases up to 5 php and then increases. The glass transition temperature (Tg) of PUF decreases on loading of ONC. The TGA analysis shows that there is slight increase in degradation temperature with increase in ONC loading. The flame retardant properties (LOI and flame spread rate) are improved slightly on addition (3 php) of ONC filled PUF.