WS2 超细粉体的固相法合成

WS2 超细粉体的固相法合成;WS2;固相反应;过硫系数;高能球磨;粒度     

芳基汞化合物的性质研究——Ⅶ.邻位取代苯基氯化汞的质子分解反应

本文研究了邻位取代苯基氯化汞o-XC_6H_4HgCl(X=CH_3、H、Cl、Br、COOC_2H_5、NO_2)与HCl(NaI)在85％对氧陆圜水溶液中的质子分解反应,证明反应按S_El历程进行。视取代基不同,反应速度次序如下:CH_3>H>Cl>COOC_2H_5～Br>NO_2。从化学反应与紫外光谱的研究以及理论计算结果表明,p或π电子的邻位取代基对水原子有分子内配位,它对反应速度有重要影响。测定了15种p-、m-、o-取代苯基氯化汞在80％对氧陆圜水溶液中在40.0℃的质子分解反应的速度常数k_1,表明给电性取代基加速反应,吸电性取代基使反应减慢,这可以看作是反应中心在芳环上的芳基汞化合物的S_E1反应所具有的一个特点。     

Synthesis and structure of anhydrodimers of salicylaldehydes

Anhydrodimers have been synthesized by reactions of salicylaldehyde and 3,5-di-tert-butylsalicylaldehyde with SOCl₂ or PCl₅. A mechanism of condensation has been proposed, and the molecular structure of dibenzo-2,6,9-trioxabicyclo[3.3.1]nona-3,7-diene has been determined by X-ray structural analysis.Deceased.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1549–1551, August, 1995.The work was supported by the Russian Foundation for Basic Research (Project No. 94-03-08653).     

核磁共振法测定高聚物的结构—核磁共振二维谱

介绍了核磁共振(NMR)波谱,尤其是核磁共振二维谱(2D NMR)在最近几年内的进展。内容包括怎样用NMR测定高聚物的序列分布、共聚物结构、聚合物的混溶性、聚合物液晶的取向度、分子量、短链度和长链支化度、凝聚态高聚物的多相结构等。     

Ni-SDC固体氧化物燃料电池阳极的合成和性质

采用柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法制备氧化镍（NiO）粉末和Ce0.8Sm0.2O1.9（SDC）粉末，并将NiO与SDC按不同质量比和不同制备工艺制备了固体氧化物燃料电池（SOFC）的阳极前身。再用自组装的还原装置将其在820℃经2．5h还原后，采用四端子法测量其电导率值。分析了阳极片电导率与阳极片微结构、Ni的质量百分数、混合研磨时间及烧结温度之间的关系。结果显示，阳极片的电导率强烈依赖于镍含量和制备工艺。     

Synthesis and Structure of Ag_3PSe_4

The title compound Ag3PSe4 was synthesized by the reaction of Ag powder,P2Se5 and Se in a molar ratio of 1:1:1 at 500℃ and structurally characterized by X-ray crystallography.The crystal belongs to orthorhombic,space group Pmn21 with cell parameters:a=7.689(4),b=6.660(3),c=6.379(4)A,V=326.7(3)A^3,Z=2,Dc=6.816g/cm^3,Mr=670.42,F(000)=584,μ=31.302mm^-1,R=0.0606,wR=0.1289 and S=1.012,The 3-D structure can be regarded as constructed from the stacking of puckered Ag-P-Se honeycomb-like sheets along the c direction,in which the Ag,P and Se atoms are bonded to each other to form a chair-like six-membered ring,and the rings then build the sheets by sharing edges.     

Influence of thermal and thermo-mechanical treatment

Two lipids with similar melting ranges but of different composition were analyzed using differential scanning calorimetry and X-ray diffraction. The lipids were processed via extrusion or were tempered at different temperatures; they were analyzed directly after extrusion and after storage at 40°C. Precirol ATO 5® showed high sensitivity to storage time and varied temperature exposure. Extrusion showed only marginal influences on the solid state. Melting peaks were narrower and shifted to higher temperatures in comparison to the untreated powder. Dynasan 114® was more robust, changes in the solid state could only be shown for samples treated above the melting range. Thus, Dynasan 114® is more appropriate for solid lipid extrusion of pharmaceutical products.     

壳聚糖固体聚合物电池用膜

壳聚糖是甲壳素脱乙酰基的产物，具有良好的成膜性、生物相容性、环保以及价格低廉等特点。作为一种碱性高分子膜材料，近年来已成为聚电解质研究领域中的研究热点。本文综述了壳聚糖固体聚合物电池用膜的研究现状，其改性工艺主要包括共混、化学改性、质子酸掺杂、无机盐掺杂等方法，比较了各种工艺处理后壳聚糖固体聚合物电解质膜的性能差异，并就壳聚糖固体聚合物电解质膜中离子传导机理中有待解决的问题进行探讨，并提出了进一步改进壳聚糖固体聚合物电解质膜性能的研究思路。     

Recyclable,non-leaching antimicrobial magnetic nanoparticles

Recyclable antimicrobial magnetic nanoparticles, Fe₃O₄@P(St-co-AcQAC), were prepared through surfactantfree seeded emulsion polymerization involving a polymerizable, hydrophobic quaternary ammonium compound (QAC). These antimicrobial magnetic nanoparticles demonstrated excellent antimicrobial activities against both Grampositive and Gram-negative bacteria, and can be reused for multiple times.     

偏最小二乘法分光光度同时测定复方扑热息痛片中各组分含量

本文介绍了偏最小二乘法(PLS)用于多组分分光光度分析的基本原理和算法.研究了复方扑热患痛片中扑热息痛、阿司匹林和咖啡因的PLS测定方法,各组分的平均回收率分别为99.88±0.33％、99.99±0.14％和99.92±1.24％(置信度95％).