ZSM-5/Y复合分子筛在烃类催化裂化催化剂中的应用研究

以大庆减压蜡油为原料，考察了水热脱铝ZSM-5/Y复合分子筛的催化裂化性能，并与经同样条件水热脱铝的ZSM-5和Y型沸石的机械混合分子筛进行了对比研究。结果表明，与机械混合样品相比，复合分子筛具有较大的柴油产率和气体产率，汽油产率降低。从复合分子筛结构和ZSM-5的择形催化两方面分析了复合分子筛和机械混合分子筛裂化性能差别的原因。复合分子筛的聚集体结构不利于大分子进入分子筛结构中进行裂化，有利于汽油组分的裂化。气体数据分析支持了复合分子筛的结构特点。     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

Preparation of Saccharide-Silica Composites by a Sol-Gel Method and the Application for Optical Resolution of Metal Chelate Compounds

A novel organic-inorganic composite was prepared by a sol-gel process using hydrolysis and condensation of tetraethoxysilane (TEOS) reacted with a saccharide. During the process, ethoxy groups of the TEOS were replaced with hydroxyl groups of the saccharide and, consequently, saccharide molecules were combined with silica through their hydroxyl groups. Samples obtained under different reaction conditions were used for optical resolution of a metal chelate compound. The resolution ability of the composites was affected by the amount of water added for hydrolysis and of the saccharide. In particular, the amount of water drastically influenced the optical resolution performance. Composites obtained at the lower H2O/TEOS ratio gave the metal chelate compound a higher optical rotation. Three types of composites with the same composition were prepared by kneading, impregnation and by the sol-gel method, and were compared. The sol-gel composite showed the best optical resolution ability. It was concluded that the optical resolution ability was closely related to dispersibility of saccharide in the silica matrix.     

反应性复合乳液的合成、表征及其交联反应

利用种子半连续乳液聚合方法合成了核层或壳层带有环氧基以及壳层带有羧基的3种不同核/壳结构的乳胶粒子,通过物理共混带环氧基和羧基的乳胶粒子,得到了两种反应性复合乳液.利用透射电镜和激光动态光散射对乳胶粒子进行了表征,其粒径分布较窄,粒径分布的多分散系数为0.062,平均粒径约76 nm,乳胶粒子具有明显的核/壳结构.通过胶膜的凝胶率和膨胀率的测定和红外光谱分析对反应性复合乳液中乳胶粒子的扩散及交联反应进行了研究,并探讨了不同核壳结构复合乳液对涂膜机械性能的影响.研究表明,当反应性复合乳液中的环氧基和羧基分别分布在乳胶粒子的核层和壳层时,有利于聚合物分子链的充分扩散和化学交联反应的进行,从而提高涂膜的物理化学性能,当甲基丙烯酸缩水甘油酯(GMA)含量为10 wt%时,涂膜的拉伸强度达20.3 MPa.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

微量元素锌在治疗Bell麻痹中的作用

为探讨急性早期应用补锌和综合疗法治疗Bell麻痹 ,将 1 5 8例Bell麻痹患者 ,随机分成两组 :(1 )补锌组 (补锌 +综合疗法 ) ;(2 )对照组 (单纯综合疗法 )。对其进行了观察对比治疗 ,同时检测了所有患者治疗前后自身对照发锌值 ,还对所有患者进行了定位诊断、面神经电反应测试、并对面肌功能进行评分。结果表明 ,对定位诊断其病变在D段、面肌功能评分在 1 1分以下、面神经无电反应患者 ,即使给予早期综合治疗 ,效果仍较差 ,而早期给予补锌加综合治疗效果优于对照组 ,其它段内患者治疗次数和治愈天数也均优于对照组。可见微量元素锌在发挥免疫应答、免疫调控中的重要作用     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

Effective electromagnetic and chiral parameters of chiral composite material

The effective parameters of chiral composite are studied using a simple model, that is, randomly oriented non-interacting wire helices embedded in a nonchiral host medium. It is found that both the effective permittivity and permeability are independent on the handedness of the chiral objects while the effective chirality admittance is dependent. It is also found that when the ratio of the radius of the chiral helix to its pitch is about 0.23, maximum chirality admittance is achieved. The effective parameters of equichiral sample are also discussed.     

Efficiency of composite vs. conically shaped chromatographic columns

The theory of composite chromatographic columns has been re-examined and general equations relating their efficiency to those of individual columns were derived. The derivations were based on elementary principles without reference to the principle of variance additivity. Derived also, were general equations for the efficiency of columns with continuously varying diameters, HETP and other properties from which formulae for special cases of practical interest were deduced. An example comparing the efficiencies of two columns, one conical and the other composite was given. The calculations show clearly that the conical column is superior in efficiency for the same total length and total retention volume.     

Optimisation of the chlorthalidone chiral separation by capillary electrochromatography using an achiral stationary phase and cyclodextrin in the mobile phase

The separation of chlorthalidone enantiomers in capillary electrochromatography on an achiral stationary phase when adding a chiral selector, hydroxypropyl-β-cyclodextrin, to the mobile phase, was optimised. The goal was to investigate the feasibility of modelling retention times and resolution when during the optimisation procedure regular replacement of columns is required due to their fragility. Therefore, it is essential that the packing procedure delivers reproducible columns. The optimisation of an existing chlorthalidone separation was chosen as case study. The influence of two factors, chiral selector concentration and organic modifier content, on the responses was modelled. The experiments performed prior to modelling were defined by a central composite design. Results on different columns, obtained under identical experimental conditions, were found comparable and thus modelling was possible in situations where several columns were required to complete a design. A second-order polynomial model was built for both responses. Optimal separations were also predicted using Derringer’s desirability functions. The optimum was found at 33 mM cyclodextrin and 16% (v/v) acetonitrile on two types of columns (with different packing times) leading to a strong reduction in analysis time for an equally good separation compared to the initial conditions. Measured and predicted responses were found comparable, indicating that acceptable models were obtained.