Effect of structural variation within cationic azo-surfactant upon photoresponsive function in aqueous solution

The cationic azo-surfactants possessing different spacers and tail alkyl chain lengths have been synthesized by azocoupling ofp-alkylaniline orop-ethoxyaniline with phenol, followed by alkylation and quaternalization with dibromoalkane and trimethylamine, respectively. These surfactants showed a good solubility in water. A reversibletrans-cis isomerization of the azosurfactants by photoirradiation was assessed by UV-Vis absorption spectra. Due to a difference in HLB between thetrans- andcis-surfactants, the observed critical micelle concentration (CMC) values and the electric conductivity of the surfactant solution at above the CMC were significantly affected by the photoinducedtrans-cis isomerization. The azo-surfactants bearing moderate alkyl chain lengths such as surfactants 6 (R₂=C₂H₄, R₃=C₄H₉) and 9 (R₂=C₄H₈, R₃=C₂H₅) were found to be effective to achieve large CMC changes (3.6 mmol/L for 6 and 5.9 mmol/L for 9) by UV-light irradiation. The replacement of the tail chain species also affected the photoresponsive function. The surfactant 12, possessingp-ethoxy group as the tail chain, was found to form a stable micelle aggregation as compared with the structurally related surfactant 10 having ethyl unit as its tail group, but it exhibited a large CMC change (5.3 mmol/L) by UV-light irradiation.     

木质装饰板材贫氧条件下燃烧和热解特性研究

本文利用热重差热分析仪,在各种不同的氧气浓度下对落叶松、红木和红松样品进行实验。通过对TG、DTG和DTA曲线的分析,样品干燥基要经历两个失重过程,第一个失重过程主要是纤维素和半纤维素的热解,第二个失重过程主要是木质素的炭化分解和燃烧。在各氧气浓度条件下,热解失重的第一个阶段TG和DTG曲线差异很小;在各样品失重的第二个阶段,随着氧气浓度的增加,TG和DTG曲线左移,反应结束的温度明显降低。氧气能使木质素的炭化物氧化并进而可能使其着火燃烧,从而使反应进程加快。当氧气浓度大于6.32%时,各样品DTA曲线上均有两个明显放热峰,并且随着氧气浓度的增加,DTA曲线放热峰越尖锐,放热峰面积越大,说明氧气浓度越大,在两阶段失重过程中更多的挥发分物质和固体炭化物参与燃烧。     

小间隙高放大多丝室及其放电机制

对以强猝灭气体工作的小间隙多丝室及其放电机制进行了研究,实验表明,因为工作在饱和模式区,这种室同时具有很高的气体放大和相当快的时间特性.文中探讨了放电机制,雪崩中空间电荷效应以及电离光子的产生和作用是重要的因素,而其中后一因素又受到强猝灭气体的抑制.     

Stability analysis of abnormal multiplication of plankton using parameter identification technique

This paper presents the mathematical approach for the abnormal multiplication of plankton. An abnormal multiplication can be expressed as an unstable problem and the stability of the system is investigated by introducing eigenvalues of a mathematical equation. The stability of the system can be judged by an eigenvalue based on the Lyapunov's stability theory. In this paper, the Arnoldi‐QR method is used to obtain eigenvalues and eigenvectors of the system. The mode superposition method is employed to create spatial distribution needed to analyse the stability. To obtain the objective eigenvalue, the parameter identification technique is employed. The finite element method is used for the discretization in space. Lake Kasumigaura, which is located in Ibaraki Prefecture in Japan, is selected and actual data in 1975, 1976, 1991 and 2000 are used in order to investigate the stability of the specified lake in Japan. Copyright © 2004 John Wiley & Sons, Ltd.     

Calorimetric study of methane interaction with supported Pd catalysts

As supported palladium oxide catalysts present the best performances in methane combustion in lean conditions, microcalorimetric studies of the interaction between methane and palladium oxide or metallic palladium supported on Al₂O₃, ZrO₂ and BN have been performed at 673 K. At this temperature methane reduced the palladium oxide, and the heat of reduction of palladium oxide was shown to depend on the dispersion and on the support. The lowest heats of reduction corresponded to the highest rates of methane combustion. Moreover methane reforming occurred on metallic palladium, producing hydrogen, and again methane decomposition was shown to depend on the support. This revised version was published online in July 2006 with corrections to the Cover Date.     

燃煤过程痕量元素动力学机理的研究进展

由于痕量元素在煤中的含量低微、检测困难,加之其原子量一般较大,可能的反应途径多,使得相关的反应机理研究难度极大。本文结合作者的研究成果,介绍了煤燃烧过程中痕量元素化学反应动力学的国内外研究进展,包括痕量元素化学动力学机理的建立;相关的典型实验、计算模拟及其实验验证、动力学机理模型的简化;痕量元素反应动力学机理的完善和发展,包括采用简单碰撞理论、活化络合物理论(亦称过渡态理论,或绝对反应速率理论)对痕量元素化学反应动力学机理的修正;最后指出煤燃烧过程中痕量元素动力学研究的若干方向是: (1)痕量元素反应动力学模型数据库的建立;(2)煤燃烧过程中,主量元素和次量元素的动力学机理的完善; (3)各痕量元素之间动力学研究的开展; (4)实际燃烧过程中痕量元素动力学行为的研究。     

Geodesic Acoustic Mode in Toroidally Axisymmetric Plasmas with Non-Circular Cross Sections

The geodesic acoustic mode （GAM）, first predicted by Winsor, Johnson and Dawson in an attempt to explain some experimentally observed low frequency oscillations in stellarators, is a special electrostatic fluid mode with low mode number and coupled with the so-called geodesic curvature of a toroidally confined plasma. The recent on this mode are due to the close relevance of the stabi- lization of drift turbulence by both the zonal flow and the GAM. Previously, the GAM was illustrated in very simple geometries,     

Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003     

正方分布的4×4单模光纤熔锥耦合器耦合特性分析

本文以线性耦合波方程为基础,采用散射矩阵的方法讨论了具有正方分布的4×4单模光纤熔锥形耦合器的耦合特性,并与实验作了比较,得到了比较一致的结果。     

强流RFQ的稳定性设计研究

对强流RFQ耦合间隙的确定、二极模稳定杆的设计进行了详细的研究和讨论.利用现有的RFQ冷模,进行了本征模频率的测量、场分布的调试和测量、二极模稳定杆的试验.并通过与模拟结果的比较,验证了模拟程序在RFQ腔体设计中的可靠性.同时,对影响RFQ稳定性设计的物理进行了有益的探讨.