光纤-氮系统的受激拉曼散射

在实验上,对三种不同长度的石英光纤进行了高温高压扩氮制成了光纤氮拉曼增益介质,给出了测试SRS光谱的实验装置、光谱及传输模式照片.在理论上和实验上讨论了阈值条件和谱线宽度与抽运光功率之间的关系,实验结果和理论计算基本符合.同时,在实验上还观测到微弱的氮分子和石英分子间的耦合模式. 关键词： 光纤-氮系统 受激拉曼散射 传输模式 阈值条件     

Modelling effects of subgrid-scale mixture fraction variance in LES of a piloted diffusion flame

A posteriori analysis of the statistics of two large-eddy simulation (LES) solutions describing a piloted methane–air (Sandia D) flame is performed on a series of grids with progressively increased resolution reaching about 10.5 million cells. Chemical compositions, density and temperature fields are modelled with a steady flamelet approach and parametrised by the mixture fraction. The difference between the LES solutions arises from a different numerical treatment of the subgrid scale (SGS) mixture fraction variance – an important quantity of interest in non-premixed combustion modelling. In the first case (model I), the variance transport equation is solved directly, while in the second (model II), an equation for the square of the mixture fraction is solved, and the variance is computed from its definition. The comparison of the LES solutions is based on the convergence properties of their statistics with respect to the turbulence resolution length scale. The dependence of the LES statistics is analysed for velocity and the mixture fraction fields, and tested for convergence. For the most part, the statistics converge for the finest grids, but the variance of the mixture fraction shows some residual grid dependence in the high-gradient regions of the jet near field. The SGS variance given by model I exhibits realisability everywhere, whereas in regions of the flame model II is non-realisable, predicting negative variances. Furthermore, the LES statistics of model I exhibit superior convergence behaviour.     

Investigation of conditional source-term estimation applied to a non-premixed turbulent flame

A turbulent combustion model, Conditional Source-term Estimation (CSE) is applied to a non-premixed turbulent jet methane flame. The conditional chemical source terms are determined on the basis of first order closure and the conditional averaged species concentrations are obtained by inverting an integral equation. The Tikhonov method is implemented for regularisation. Detailed chemistry is tabulated using the trajectory generated low-dimensional manifold method. Radiation due to the gaseous species is included. Reynolds Averaged Navier–Stokes calculations are performed using two different turbulence models. The objectives of the paper are (i) assessment of the impact of the main numerical parameters in CSE and (ii) comparison of the CSE numerical predictions with available experimental data and results from previous simulations for the selected flame. The number of CSE domains and the number of points in each CSE domain are shown to have a significant impact on the results if not selected appropriately. The present CSE calculations always converge to unique and stable predictions. The corrected k–ε model yields mixture fraction profiles in good agreement with the experimental data values for axial locations in the first half of the flame. Farther downstream, the RNG k–ε model performs better. Overall, the current predictions for the mixture fraction are in good agreement with the experimental data. The predicted temperatures using CSE and the k–ε turbulence model with a modified value of C_ε1 = 1.47 are found to be in very good agreement with the experimental data. Further, the current CSE results are of comparable quality with previous simulations using the flamelet model and conditional moment closure. Future work may include further investigation on optimal determination of the regularisation parameter and alternative regularisation techniques, soot modelling within the CSE formulation, and improved formulation of radiation.     

基于包层模谐振的三包层石英特种光纤温度传感特性研究

提出了一种基于包层模谐振的光纤温度传感器. 它是通过将三包层石英特种光纤(TCQSF)两端分别与普通单模光纤(SMF)电弧熔接构成的SMF-TCQSF-SMF结构. 根据耦合模理论, 首先将TCQSF等效为三个同轴波导, 按各波导模场的分布特点标量计算其传输模式的色散曲线, 并深入研究其耦合长度与传输谱线之间的关系; 其次根据光纤的热光效应及热膨胀效应, 分析计算该传感器的温度灵敏度; 最后选取耦合长度为一个拍长时的传感器进行温度传感实验. 实验结果表明, 在35-95 ℃的温度变化范围内, 其温度灵敏度为73.74 pm/℃, 与理论计算结果一致. 因此, 该传感器具有结构简单、制备容易、灵敏度高、包层模激发可控等优点, 可用于工业生产、生物医学等温度传感领域.     

透明导电薄膜ITO对浅面浮雕VCSEL的影响

对于顶面出光的浅面浮雕VCSEL结构,有源区的电流密度分布的不均性制约着单模稳定性的提高。为此,提出了一种新型结构:氧化铟锡透明导电薄膜(ITO)浅面浮雕VCSEL。该结构不仅能够增大高阶模式的阈值增益,还能够提高基模的增益,实现基模对高阶模式的稳定抑制。研究了ITO的厚度对阈值增益的影响及ITO对VCSEL有源区电流密度分布的影响。研究结果表明:在ITO的厚度为半波长的整数倍时,基模对高阶模式的限制作用最强;ITO通过改善VCSEL有源区的电流密度分布,达到了增大基模的增益和降低高阶模式增益的目的,同时还降低了串联电阻和外电压。     

经验模态分解与样本熵在并网型光伏逆变器故障诊断中的应用

摘要：针对光伏并网逆变器电路中故障信号的非线性、非平稳特点,提出一种基于经验模态分解(EMD)和样本熵(SampEn)的故障诊断方法。首先,利用经验模态分解对逆变器的三相输出电压进行分解,得到有限个本征模式分量(IMF),从中选取包含故障主要信息的前几个本征模式分量提取故障信息。然后,计算本征模式分量的样本熵,从而得到用于故障诊断的特征向量;最后,将逆变器开路故障进行分类和编码,将故障特征向量输入BP神经网络进行模式识别,从而达到故障诊断的目的。在Matlab环境下对光伏并网逆变器的故障诊断进行了实验,实验结果证明了文中方法能实现对光伏并网逆变器的故障诊断,且与小波包变换相比,该方法具有诊断效率高和准确度高等特点。     

Black phosphorus saturable absorber for ultrafast mode‐locked pulse laser via evanescent field interaction

Black phosphorus, or BP, has found a lot of applications in recent years including photonics. The most recent studies have shown that the material has an excellent optical nonlinearity useful in many areas, one of which is in saturable absorption for passive mode‐locking. A direct interaction scheme for mode‐locking, however, has a potential to optically cause permanent damage to the already delicate material. Evanescent field interaction scheme has already been proven to be a useful method to prevent such danger for other 2‐dimensional nanomaterials. In this report, we have utilized the evanescent field interaction to demonstrate that the optical nonlinear characteristics of BP is sufficiently strong to use in such an indirect interaction method. The successful demonstration of the passive mode‐locking operation has generated pulses with the pulse duration, repetition rate, and time bandwidth product of 2.18 ps, 15.59 MHz, and 0.336, respectively.     

Emergence of the sub‐THz central peak at phase transitions in artificial BaTiO3/(Ba,Sr)TiO3 superlattices

A prominent central peak in the sub‐THz frequency range was observed in the Raman spectra of BaTiO₃/(Ba,Sr)TiO₃ (BT/BST) superlattice grown on (001)MgO substrate. Both soft and central mode show an anomaly around 200 K and 280 K, which can be correlated with orthorhombic to monoclinic phase transition of BST and BT, respectively. The observed temperature dependence of the central mode enabled us to explain rather broad temperature dependence of the dielectric permittivity previously observed in BT/BST superlattices. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)