连铸结晶器内部流场及熔渣卷入的数值模拟

针对连铸结晶器内部流场及熔渣卷入过程 ,提出了两方程k -ε湍流模型和充填法数值计算模型 ,并采用硅油 /水模拟体系代替熔渣 /钢液体系 ,进行了模拟试验和数值计算。对充气造成的浸入式水口水流脉动的影响进行分析。计算结果与试验结果符合良好 ,表明本文所采用的数值模拟方法是适用的     

Similarity Solutions for Thawing Processes with a Heat Flux Condition at the Fixed Boundary

Similarity solutions for a mathematical model for thawing in a saturated semi-infinite porous medium is considered when change of phase induces a density jump and a heat flux condition of the type is imposed on the fixed face x=0. Different cases depending on physical parameters are analysed and the explicit solution is obtained if and only if an inequality for the thermal coefficient q ₀ is verified. An improvement for the existence of a similarity solution for the same free boundary problem with a constant temperature on the fixed face x=0 is also obtained. Sommario. Vengono considerate soluzioni di similarità per un modello matematico di disgelo di un mezzo poroso saturo semi-infinito allorquando il cambiamento di fase induce un salto di densità ed una condizione di flusso di calore del tipo viene imposta sulla faccia fissa x=0. Si analizzano differenti casi dipendenti da parametri fisici e la soluzione esplicita viene ottenuta se e solo se risulta verificata una diseguaglianzo per il coefficiente termico q ₀. Si ottiene altresi un miglioramento della condizione di esistenza di una soluzione di similarità per lo stesso problema al contorno libero con temperatura costante sulla faccia fissa x=0.     

断裂过程区应力应变场的数学分析

本文将条状分离区看作是位错连续分布区域,利用复变函数理论及切比雪夫多项式级数展开提出了一种统一的数学分析的方法,用以对均匀材料裂纹前方分离过程区的非线性效应进行有效的,精确的解析分析。避免以前各种模型一般都需要借助于有限元法或其他离散方法才能得到数值解答的难点。本文利用这一新方法,对断裂过程区是内聚力模型,条状屈服区模型的裂纹问题,受约束金属薄膜的裂纹问题,进行了分析计算,并与已有的结果进行了比较,得到了满意的结果。     

作动器参数对结构性能的影响和调整受力状态的实施策略模拟

基于规划法研究了作动器各参数对自适应超静定桁架性能的影响。该规划法能够使结构工作状态更合理化。这一方法能够改善自适应结构的工作状态因而提高承载能力。以此为基础，研究了具有作动器的组合杆的有关参数诸如变形上限、刚度和承载力上限对于控制效果的影响。从而为作动器的合理选择提供了理论根据。对于调整作动器变形以控制结构强度的实施策略进行了模拟和分析。该策略包括3部分：1．模拟和分析了“加载、调控、卸载”重复循环直至调控的完成；2．不同作动器按比例同时放大变形直到调控实现；3．多次加载、调控同一次加载、调控结构的等价性。研究表明本文提出的使结构工作状态合理化的调控过程是安全、可靠和灵活的。     

全息干涉条纹图的计算机自动处理与识别

本文应用数字图象处理与识别技术在IBM-PC/AT微处理计算机图象处理系统上对复杂的全息干涉条纹图进行了自动分析,文中采用二维灰度值检测的方法获取条纹的准峰或谷值二值图形,然后通过细化得到条纹中心,提出了用记忆跟踪算法自动去除毛刺和噪声线段.在用光标进行人机对话标定零级条纹后,可自动识别出其它整数条纹级数.分数级条纹级数可在整数级条纹数据之间进行线性或非线性插值得到.最后给出了全息条纹图分析的实例.     

On-line measurements of the rheological properties of fermentation broth

The paper is concerned with measurements of rheological properties of fermentation broth. An on-line rheometer, Rheohelix-1, based on the application of a helical screw impeller rotating in a draught tube has been constructed. The instrument was used for measurements of the rheological parameters of fermentation broth of Aspergillus niger in a submerged fermentation process. The results of rheological and some standard measurements have been compared and proved the applicability of the instrument.Presented at the Golden Jubilee Conference of the British Society of Rheology and Third European Rheology Conference, Edinburgh, 3–7 September, 1990.     

Order and Pattern Formation in Psychotherapy

In an empirical analysis of the dynamics of psychotherapy processes, concepts and tools from self-organization theory are applied. Our focus is on pattern formation in the therapy system, i.e. the system constituted by the interaction dynamics of therapist and patient. The hypothesis of pattern formation explored is based on data sets of 28 psychotherapy courses (10 behavioral, 3 client-centered, 9 heuristic, 6 schema-oriented; 40 to 90 weekly sessions). Patients' and therapists' therapy session records are analyzed (33 variables addressing various aspects of the therapeutic relationship, of progress within and outside the therapy setting). Multivariate methods are implemented to test the key hypothesis of self-organization theory, namely the reduction of degrees of freedom of a system. Consistent with this hypothesis, a significant reduction of degrees of freedom is found when the initial and final sessions of the therapies are compared. Correspondingly, Landsberg order increased significantly in the course of therapies. Given these findings, the explorative question of how this self-organizing property relates to therapy outcome is investigated. We find a significant positive association with various outcome measures, such as: therapist's and client's evaluations of success (direct change measures), feelings of guilt, anxiety, social potence, depression (pre-post effect sizes), and others. These results suggest that order is related to therapy outcome. In our interpretation, order is a dynamical attribute of the therapeutic alliance to be considered as a promising therapy process variable.     

Adiabatic shear band localization of inelastic single crystals in symmetric double-slip process

Summary The main objective of the present paper is the development of a viscoplastic regularization procedure valid for an adiabatic dynamic process for multi-slips of single crystals. The next objective is to focus attention on the investigation of instability criteria, and particularly on shear band localization conditions.To achieve this aim, an analysis of acceleration waves is given, and advantage is taken of the notion of the instantaneous adiabatic acoustic tensor. If zero is an eigenvalue of the acoustic tensor, then the associated discontinuity does not propagate, and one speaks of a stationary discontinuity. This situation is referred to as the strain localization condition, and corresponds to a loss of hyperbolicity of the dynamical equations. It has been proved that for an, adiabatic process of rate-dependent (elastic-viscoplastic) crystal, the wave speed of discontinuity surface always remains real and different from zero. It means that for this case the initial-value problem is well-posed. However, for an adiabatic process of rate-independent(elastic-plastic) crystal, the wave speed of discontinuity surface can be equal zero. Then the necessary condition for a localized plastic deformation along the shear band to be formed is as follows: the determinant of the instantaneous adiabatic acoustic tensor is equal to zero. This condition for localization is equivalent to that obtained by using the standard bifurcation method. Based on this idea, the conditions for adiabatic shear band localization of plastic deformation have been investigated for single crystals. Particular attention has been focused on the discussion of the influence of thermal expansion, thermal plastic, softening and spatial covariance effects on shear band localization criteria for a planar model of an f.c.c. crystal undergoing symmetric primary-conjugate double slip. The results obtained have been compared with available experimental observations.Finally, it is noteworthy that the viscoplasticity regularization procedure can be used in the developing of an unconditionally stable numerical integration algorithm for simulation of adiabatic inelastic flow processes in ductile single crystals, cf. [21].The paper has been prepared within research programme sponsored by the Committee of Scientific Research under Grant 3 P404 031 07.     

Numerical path integration of a non-homogeneous Markov process

The numerical path integration method, based on Gauss-Legendre integration scheme, is applied to a Duffing oscillator subject to both sinusoidal and white noise excitations. The response of the system is a Markov process with one of the drift coefficients being periodic. It is a non-homogeneous Markov process that does not have a stationary probability distribution. When applying the numerical procedure, the values of transition probability density at the Gaussian-Legendre quadrature points need only be calculated for time steps of the first period of the sinusoidal excitation, and they can be saved for use in all subsequent periods. The numerical procedure is capable of capturing the evolution of the probability density from an initial distribution to one that is changing and rotating periodically in the phase space.     

单轴条件下砂岩三维破裂过程的CT观测

岩石破裂过程研究一直是岩石力学专家关注的重要问题。本文采用特制的三轴压力仪与医用西门子SOMATOM -plusCT扫描仪结合 ,对砂岩进行了室内单轴压缩试验。通过对砂岩的CT图像和密度损伤增量与应力关系曲线分析 ,结果显示 ,砂岩的破裂演化过程可分为初始损伤的压密、裂纹出现—扩展、裂纹归并—分岔、裂纹重分岔—扩展以及裂纹惯通—宏观破坏等五个阶段。在初始损伤的压密阶段 ,砂岩的密度损伤增量为正值 ,速率也为正 ;在裂纹出现—扩展阶段 ,砂岩出现局部密度损伤增量减小 ,并随应力增加而由正值转为负值 ,速率也由正变负 ;在裂纹归并—分岔阶段 ,砂岩的密度损伤增量全为负值 ,速率也变快 ;在裂纹重分岔—扩展阶段 ,砂岩的密度损伤增量继续变负 ,但速率变慢 ;在裂纹惯通—宏观破坏阶段 ,砂岩的密度损伤增量继续变负 ,速率变的更快。