“功能涂料”课程的教学改革:打造趣味性、互动性和挑战性的课堂*

本着培养涂料行业精英人才的宗旨,针对涂料行业对人才需求的特点,结合多年教学经验,从教材的选择、教学内容设置、教学方法改进以及考核方法改革等4个方面探索了“功能涂料”课程的教学方法改革与课程实践。通过自编教材,精心设置授课内容,将科研成果、前沿知识、生活场景、新闻事件与书本知识相结合,提高课堂的趣味性;通过讨论法和交换式互动上课来加强课堂的互动性;通过过程性评价提高课程的学业挑战度。通过教学改革,本课程的选课率和出勤率得到了大幅提高,学生对涂料的兴趣明显增加,毕业后选择进入涂料领域工作的学生也越来越多。     

大口径反射镜高反射膜研究进展

大口径反射镜是大型反射式光学系统中关键的光学元件,在工作波段的反射率直接决定了光学系统的性能。随着地基、天基观测设备的发展,对大口径反射镜高反射膜提出了更宽的工作波段、更高的反射率、更好的环境适应性等要求。针对这些挑战,各种新的膜系结构、新的镀制方法、新的膜层材料纷纷出现,满足了大口径反射镜高反射膜的各种需求。本文对近些年国内外的大口径反射镜高反射膜研究进展予以综述,并预测大口径反射镜高反膜制备的技术趋势将由铝反射膜向银反射膜、由热蒸发向磁控溅射发展。     

Synergic Enhancement of High-density Polyethylene through Ultrahigh Molecular Weight Polyethylene and Multi-flow Vibration Injection Molding: A Facile Fabrication with Potential Industrial Prospects

General-purpose plastics with high strength and toughness have been in great demand for structural engineering applications. To achieve the reinforcement and broaden the application scope of high-density polyethylene(HDPE), multi-flow vibration injection molding(MFVIM) and ultrahigh molecular weight polyethylene(UHMWPE) are synergistically employed in this work. Herein, the MFVIM has better shear layer control ability and higher fabrication advantage for complex parts than other analogous novel injection molding technologies reported.The reinforcing effect of various filling times and UHMWPE contents as well as the corresponding microstructure evolution are investigated.When 5 wt% UHMWPE is added, MFVIM process with six flow times thickens the shear layer to the whole thickness. The tensile strength and modulus increase to 2.14 and 1.39 times, respectively, compared to neat HDPE on the premise of remaining 70% impact strength. Structural characterizations indicate that the enhancement is attributed to the improvement of shish-kebab content and lamellae compactness, as well as related to the corresponding size distributions of undissolved UHMWPE particles. This novel injection molding technology with great industrial prospects provides a facile and effective strategy to broaden the engineering applications of HDPE materials. Besides, excessive UHMWPE may impair the synergistic enhancement effect, which is also reasonably explained.     

极性晶体膜中强耦合激子的性质

在强耦合极化子模型基础上,采用Lee-Low-Pines(LLP)变分法研究了极性晶体膜中激子与表面光学(SO)声子强耦合、与体纵光学(LO)声子弱耦合体系的性质.讨论了极性晶体膜中激子的诱生势与膜厚度和温度的变化关系.结果表明:激子的诱生势不仅与电子-空穴间距离有关,而且与极性晶体膜厚度有关,同时温度对激子诱生势的影响十分显著.     

Controlling the infrared optical properties of rf-sputtered NiO films for applications of infrared window

In this paper, we will focus on an IR transmittance enhancement technique from the window material point of view by using metal oxides, especially nickel oxide (NiO). At first, anti-reflection (AR) coatings were modeled by using the optical properties of NiO films. The transmittance of the model was predicted using Swanepoel’s model and verified with NiO film prepared by rf magnetron sputtering. Also, post-deposition annealing was performed and was found to change the optical properties of the NiO film. Therefore, we analyzed the annealing effect on the IR optical properties of the NiO film. Furthermore, we confirmed the durability of the NiO film and verified the possibility of this material being used in infrared optics.     

Aharonov–Bohm effect in non-uniform crater-like quantum dot with double rim

We study electron energies in a double concentric quantum ring with anisotropy in the rims heights in the presence of the external magnetic field applied along the symmetry axis. To this end, we consider a model in which the thickness grows linearly from the axis up to the inner rim with a slope different from one between the inner and the outer rims. The anisotropy in the rims heights originated by the presence in the structure of various valleys we simulate by periodic dependence of the slope on the radial direction. We show that the wave functions of the electron confined in such structure can be found analytically if the slopes in all radial directions are the same, and by using a simple exact diagonalization procedure otherwise. The behavior of the electron energies as functions of the magnetic field, rings radii and rims heights, as well as the number of the valleys and their depths is consistently described with our formalism. The entanglement of the states with different radial and orbital quantum numbers, the period and the amplitude of the Aharonov–Bohm oscillations are very sensible to any variations of the rims heights.     

Nano-composite LiMnPO4 as new insertion electrode for electrochemical supercapacitors

Nano-composite olivine LiMnPO₄ (nC-LMP) was found to exhibit facile pseudo-capacitive characteristics in aqueous as well as non-aqueous electrolytes. We demonstrated employing nC-LMP as positive electrode in hybrid electrochemical capacitors namely Li-Ion hybrid capacitors (LIC). Adapting a simple CVD technique, nano-crystallites of LiMnPO₄ were coated with carbon monolayers of ∼2 nm thick to circumvent its poor intrinsic electronic conductivity. The novelty is that the single crystallites were intimately covered with carbon ring and networked to the neighboring crystallites via the continuous carbon wire-like connectivity as revealed from HRTEM analysis. Single electrode faradic capacitance of 3025 Fg⁻¹ (versus standard calomel reference electrode) was deduced for carbon coated LMP, the highest reported hitherto in Li⁺ aqueous electrolytes. Employing nC-LMP as working electrode versus an activated carbon (AC), we obtained a high specific energy of 28.8 Wh kg⁻¹ with appreciable stability in aqueous electrolytes whereas in nonaqueous electrolyte there is an obvious increase in energy density (35 Wh kg⁻¹) due to wider potential window. That is, a full cell version of LIC, AC|Li⁺|LMP, was fabricated and demonstrated its facile cycling characteristics via removal/insertion of Li⁺ within nC-LMP (positive electrode) and the electrosorption of Li⁺ into mesoporous carbon (AC) (negative electrode). Such cells ensured a typical battery-like charging and EDLC-like discharging characteristics of LIC type electrochemical capacitors (ECs) which are desired to enhance safety and energy densities.     

Electrical and optical properties of Si-doped indium tin oxides as transparent electrode and anti-reflection coating for solar cells

We have studied the electrical and optical properties of Si-doped indium tin oxides (ITSOs) as transparent electrodes and anti-reflection coatings for Si-based solar cells. The ITSO thin films were obtained by co-sputtering of ITO and SiO₂ targets under target power control. The resistivity of the ITSO thin films deposited at 0.625 in terms of power ratio (ITO/SiO₂) were 391 Ωcm. In this condition, the ITSO thin films showed very high resistivity compared to sputted pure ITO thin films (1.08 × 10⁻³ Ωcm). However, refractive index of ITSO thin films deposited at the same condition at 500 nm is somewhat lowered to 1.97 compared to ITO thin films (2.06). The fabricated graded refractive index AR coatings using ITO, ITSO, and SiO₂ thin films kept over 80% of transmittance regardless of their thickness varing from 97 nm to 1196 nm because of their low extinction coefficient. As the AR coating with graded refractive indices using ITO, ITSO, and SiO₂ layers was applied to general silicon-based solar cell, the current level increased nearly twice more than that of bare silicon solar cell without AR coating.     

无机硅酸盐涂料的研制及应用

以硅酸盐溶液为主要原料,利用少量自制的含偶联功能基团的有机硅聚合物乳液与硅酸盐进行杂化反应,同时与填料等有效的结合制备了无机硅酸盐涂料,并对涂料的性能进行研究。结果表明：制备的无机硅酸盐涂层具有优异的贮存稳定性、柔韧性、防水性、耐污性、阻燃性以及耐霉菌性等,满足建筑内外墙涂料的相关标准要求。     

用于高性能涂料的无定型聚芳醚腈酮共聚物的制备及性能

通过亲核缩聚反应由酚酞、4,4′-二氟二苯酮和2,6′-二氯苯腈制备了一系列不同腈基含量的无定型聚芳醚腈酮共聚物。通过FT-IR、1 H-NMR、13 C-NMR、DSC、TGA等表征了聚合物的结构与性能。研究表明:随着腈基含量的提高,聚合物的玻璃化转变温度升高,在马口铁板上的附着力逐渐提高;该聚合物在有机溶剂中具有良好的可溶性和成膜性,聚合物涂层具有优异的综合性能。