二(β-羟亚胺)二氯化钛配合物的合成及催化乙烯聚合

报道了3个β-羟亚胺配体(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂CH(Ph)OH(1a), (2,6-^emPr₂C₆H₃)N＝C·(Ph)CH₂C(Ph)₂OH(1b)和(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂C(C₁₂H₈)OH(1c)及其二(β-羟亚胺)二氯化钛配合物[(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂CH(Ph)O]₂TiCl₂(2a), [(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂C(Ph)₂O]₂·TiCl₂(2b)和[(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂C(C₁₂H₈)O]₂TiCl₂(2c)的合成, 并对其结构进行了表征. 在助催化剂甲基铝氧烷(MAO)作用下, 以化合物2b为主催化剂, 研究了Al/Ti摩尔比、 反应时间、 温度和聚合压力等对乙烯聚合的影响, 发现该催化体系在较宽的反应条件下均可得到很高分子量的聚乙烯, 熔点均在140℃左右. 以化合物2a~2c为主催化剂对乙烯进行催化聚合, 发现在β碳位上取代基的立体位阻对催化剂活性有很大影响. 当化合物2b上引入2个苯基取代基时, 催化剂显示出最佳催化活性.     

低热-高压法制备PLGA多孔支架及其体外降解研究

采用低热-高压法制备了聚(dl-丙交酯／乙交酯)75／25(PLGA75／25)组织工程多孔支架。该方法避免了使用有机溶剂，支架的孔隙率在90％以上，孔径大小分布均匀。多孔支架经过酒精处理后，支架表面产生许多微小的凹陷；用藻酸钙改性处理后，支架形态保持良好。两种处理都使支架的压缩强度有所增大，亲水性增强。虽然孔隙率高的支架降解速率稍慢，但其体外降解规律基本一致：特性粘数争力学强度衰减快，而质量损失较慢，降解6周后，支架的质量损失仅为3％左右；体外降解3周后，支架的形态保持良好，可望在细胞移植争组织修复的早期发挥支撑作用。     

Triclabendazole: An Intriguing Case of Co‐existence of Conformational and Tautomeric Polymorphism

The crystal polymorphism of the anthelmintic drug, triclabendazole ( TCB ), is described. Two anhydrates (Forms I and II), three solvates, and an amorphous form have been previously mentioned. This study reports the crystal structures of Forms I ( 1 ) and II ( 2 ). These structures illustrate the uncommon phenomenon of tautomeric polymorphism. TCB exists as two tautomers A and B. Form I (Z′=2) is composed of two molecules of tautomer A while Form II (Z′=1) contains a 1:1 mixture of A and B. The polymorphs are also characterized by using other solid‐state techniques (differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), PXRD, FT‐IR, and NMR spectroscopy). Form I is the higher melting form (m.p.: 177 °C, ΔH_f=≈105±4 J g^?1) and is the more stable form at room temperature. Form II is the lower melting polymorph (m.p.: 166 °C, ΔH_f=≈86±3 J g^?1) and shows high kinetic stability on storage in comparison to the amorphous form but it transforms readily into Form I in a solution‐mediated process. Crystal structure analysis of co‐crystals 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 further confirms the existence of tautomeric polymorphism in TCB . In 3 and 11 , tautomer A is present whereas in 4 , 5 , 6 , 7 , 8 , 9 , 10 the TCB molecule exists wholly as tautomer B. The DFT calculations suggest that the optimized tautomers A and B have nearly the same energies. Single point energy calculations reveal that tautomer A (in Form I) exists in two low‐energy conformations, whereas in Form II both tautomers A and B exist in an unfavorable high‐energy conformation, stabilized by a five‐point dimer synthon. The structural and thermodynamic features of 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 are discussed in detail. Triclabendazole is an intriguing case in which tautomeric and conformational variations co‐exist in the polymorphs.     

Dependence of dielectric,ferroelectric, and piezoelectric properties on crystalline properties of p(VDF‐co‐TrFE) copolymers

Thermal processing at various temperatures has been used to fabricate poly(vinylidene fluoride‐co‐trifluoroethylene) [P(VDF‐co‐TrFE)] films with varied crystalline properties in an attempt to improve their piezoelectric properties. Although the dielectric constant of the films annealed at higher temperature is smaller than that of cooled and quenched ones, it has been shown that the annealed films possess larger crystallinity and stacked lamellar crystal grain size. The ferroelectric domains deriving from crystal region in all the samples are effectively improved by hot polarization. As a result, the remnant polarizations (P_r) and coercive electric field (E_c) of the corresponding films are improved at a low frequency due to the response of dipoles in crystal phase, and the largest piezoelectric constant in the longitudinal thickness mode (d₃₃=?25 pC/N) is obtained in an annealed copolymer film. The results illustrate improving the crystal structure of P(VDF‐co‐TrFE) is an effective way to realize high electromechanical properties, which provides broadly applied scenery for this kind of copolymer in piezoelectric components. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis and characterization of poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)‐grafted‐poly(acrylonitrile) via single electron transfer–living radical polymerization process

Preparation of functional fluoromaterials through chemical modification of traditional fluoropolymers has been recognized as an economic and convenient strategy to expand the application areas of fluoropolymers. Poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)‐grafted‐polyacrylonitrile (P(VDF‐co‐CTFE)‐g‐PAN) has been successfully synthesized via single electron transfer–living radical polymerization (SET–LRP) process initiated with macroinitiator P(VDF‐co‐CTFE) in the presence of trace amount of Cu(0)/tris(2(dimethylamino)ethyl)amine (Me₆‐TREN) in dimethyl sulfoxide (DMSO) at ambient temperature. The typical side reactions happened on P(VDF‐co‐CTFE) induced by the nitrogen‐containing solvents and high reaction temperature in atom transfer radical polymerization process could be avoided in SET–LRP process by using the mild reaction conditions. Well‐controlled polymerization features were observed under varied reaction conditions including the different reaction temperature, catalyst concentration, as well as monomer amount in feed. An induction period of 0.5–1.0 h in the polymerization procedure was observed at low temperature, which may be attributed to the Cu₂O from the surface of the Cu(0) powder. When Cu(0) catalyst is activated, the introduction period is eliminated. The polymerization rates were decelerated by adding excessive Me₆‐TREN for the formation of more stable CuCl₂/(Me₆‐TREN)₂. The structure of P(VDF‐co‐CTFE)‐g‐PAN was demonstrated by FTIR, NMR, DSC, and TGA. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Recent Insights Into the Biomedical Applications of Shape‐memory Polymers

Shape‐memory polymers (SMP) are versatile stimuli‐responsive materials that can switch, upon stimulation, from a temporary to a permanent shape. This advanced functionality makes SMP suitable and promising materials for diverse technological applications, including the fabrication of smart biomedical devices. In this paper, advances in the design of SMP are discussed, with emphasis on materials investigated for medical applications. Future directions necessary to bring SMP closer to their clinical application are also highlighted.

com/cms/attachment/ac5db351-c48d-4938-b1e2-262b13369529/mgra001.jpg" data-lg-src="https://wol-prod-cdn.literatumonline.com/cms/attachment/29bb2ec2-e61f-4465-aa78-22ad0f59c9ec/mgra001.jpg" alt="image" title="image">

     

Preparation of bow tie–type methacrylated poly(caprolactone‐co‐lactic acid) scaffolds: effect of collagen modification on cell growth

A branched methacrylated poly(caprolactone‐co‐lactic acid) and methacrylated poly(tetramethylene ether glycol) (PTMG‐IEM) resins were synthesized. ¹H‐NMR spectroscopy, attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR) spectroscopy, and gel permeation chromatography confirmed the chemical structures of copolymers. The photoinitiated polymerization of formulation composed of various amounts of methacrylated poly(caprolactone‐co‐lactic acid), PTMG‐IEM, poly(ethylene glycol) diacrylate, water, and photoinitiator were performed. The curing reactions were followed by photo‐DSC (Differential scanning calorimetry). Gel fraction was calculated from the insoluble part and found as ≥93%. Swelling and contact angles were measured, and all increased with the increasing amount of PTMG‐IEM in network formulations. In vitro degradation studies were performed at 37 °C in phosphate‐buffered saline (pH 7.4). Collagen‐modified polymers were also prepared and introduced as a bioactive moiety to modify the polymer to enhance cell affinity. To compare the cell adhesion affinity to the polymer with and without collagen, cell growth experiments were performed. The results showed that collagen improves the cell adhesion onto the polymer surface. With the increasing amount of collagen, cell viability increases 86% (ECV304, p < 0.05) and 83% (3 T3, p < 0.05). Copyright © 2011 John Wiley & Sons, Ltd.     

Melt modification of poly(styrene‐co‐maleic anhydride) with alcohols in the presence of 1,3‐oxazolines

Various copolyesteramides were prepared by melt compounding at 220 °C involving reaction of poly(styrene‐co‐maleic anhydride), SMA, with 6, 17, and 28 wt % maleic anhydride content, and 1‐dodecanol, C12OH, in the presence of 2‐undecyl‐1,3‐oxazoline, C11OXA. Copolymer architectures were examined by means of ¹H NMR, FTIR, DSC, and TGA using model compounds prepared via solution reactions. While conversion of anhydride with alcohol was poor due to the thermodynamically favored anhydride ring formation, very high conversions were achieved when stoichiometric amounts of C11OXA were added. According to spectroscopic studies esteramide groups resulted from reaction of oxazoline with carboxylic acid intermediate. In the absence of alcohol, C11OXA reacted with anhydride to produce esterimides. Effective attachment of flexible n‐alkyl side chains via simultaneous reaction of C12OH and C11OXA resulted in lower glass‐transition temperatures of copolyesteramides. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1222–1231, 2000     

Photoluminescent properties of poly(p‐phenylene vinylene thiophene‐co‐siloxane)

A new p‐phenylene–vinylene–thiophene‐based siloxane block copolymer has been synthesized. The copolymer consists of alternating rigid and flexible blocks. The rigid blocks are composed of phenylene–vinylene–thiophene‐based units, and the flexible blocks are derived from 1,3‐dialkyldisiloxane units. The former component acts as the chromophore, and allows fine tuning of band gap for blue‐light emission, while the latter imparts good solubility of the copolymer in organic solvents, and thus, should enhance processibility of the resulting copolymer. The thermal properties of the copolymer have been characterized by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The photoluminescence (PL) of the copolymer in solution and in cast film has been studied. The effects of concentration on the PL intensity of the new copolymer in polymer blends with poly(methyl methacrylate) (PMMA) and poly(vinyl carbazole) (PVK) have also been described. Efficient energy transfer from PVK to the new block copolymer in the blended film was observed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1450–1456, 2000     

Processing and morphological development of carbon black filled conducting blends using a binary host of poly(styrene co‐acrylonitrile) and poly(styrene)

The effects of host/filler interactions, processing, and morphological development of low percolation threshold (Φ_c) conducting blends were investigated. It was found that the value of Φ_c was dramatically reduced by the isolation of the carbon black (CB) conducting filler at the cocontinuous interface of a binary poly(styrene) (PS) and poly(styrene co‐acrylonitrile) (SAN) insulating host, resulting in a multiple percolation effect. Accumulation of the filler at the interface was possible due to the incompatibility of the CB filler with the PS phase and partial compatibility with the SAN phase. The best results were obtained by initially dispersing the CB in the PS phase during melt‐ blending, followed by the addition of the SAN phase. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3106–3119, 2000