Spectral shifts and spectral switches in diffraction of ultrashort pulsed beams passing through a circular aperture

Based on the Fourier transform method, a simple closed-form expression for the on-axis power spectrum of ultrashort Gaussian pulsed beams in diffraction at a circular aperture is derived, which permits us to study spectral changes both analytically and numerically. It is shown that for diffracted pulsed beams there exist spectral red and blue shifts, spectral narrowing, and spectral switches in the near field. The aperture diffraction plays an important role in spectral switching, but both the truncation parameter and bandwidth (or equally, Fourier transform limited pulse duration) affect the behavior of spectral switches.     

Dynamic control of photonic bandgap mediated by vacuum-induced coherence

We theoretically examine the storage and retrieval of a light pulse in a medium comprised of four-level atoms of the V − Λ-type. The two intermediate levels are probed by a weak field and vacuum-induced coherence effects lead the system to transparency. The temporal variation of the intermediate levels' splitting is used as an external parameter which allows the transfer of the impinging field to a combination of spin coherences. An auxiliary and far-detuned control field in a standing-wave configuration is used to induce a variable photonic bandgap by cross-phase modulation. It is shown that dynamic control of such a bandgap can be used to coherently manipulate the previously stored probe pulse. We use a general scheme to take into account multiwave mixing effects and solve the combined Maxwell-Bloch equations for the relevant coherences. It is shown that the system acts as an all-optical router.     

Blumlein双极脉冲形成线

为了提高超宽带系统的辐射因子,对超宽带脉冲整形技术进行了深入研究,介绍了采用Blumlein线产生双极脉冲的高功率双极脉冲产生技术。对采用Blumlein线产生双极脉冲的原理进行了讨论,通过数值模拟分析了影响双极脉冲形成的主要因素。设计了一套Blumlein高功率双极脉冲形成线,在800 kV脉冲源上开展了高压实验研究,分析了开关及形成线长度对形双极脉冲的影响。在输入单极脉冲电压为652.0 kV、脉宽为2.1 ns的情况下,Blumlein双极脉冲形成线可以产生负峰电压为571.9 kV、正峰电压为550.4 kV、半周期为740 ps的双极脉冲,峰-峰值电压是入射脉冲峰值电压的1.72倍,辐射因子为4.54 MV。     

体结构GaAs光导开关实验研究

为解决光导开关耐受场强的提高问题,研制了2种体结构光导开关,并进行了实验研究。两种开关均由半绝缘GaAs材料制成,一种尺寸为10.0 mm×10.0 mm×0.6 mm,电极位于10.0 mm×10.0 mm面上相对位置,电极直径6 mm;另一种尺寸为15.0 mm×15.0 mm×3.0 mm,8 mm直径电极位于15.0 mm×15.0 mm面上相对位置。测试了第1种开关在不同半高宽脉冲加载电压下的击穿电压,结果表明其最大耐受电压达7.6 kV,击穿电场127 kV/cm。对第2种结构测试了开关在直流加载条件下的暗态伏安特性并进行了触发实验,结果表明在15 kV工作电压下,其放电最大电流超过3.5 kA。     

高温环境中光触发开关的设计

 针对在高温环境中测试仪器的供电方式问题,利用光敏二极管响应时间短并对光灵敏的优点,将其作为供电电源的开关,吸收高温辐射源发出的红外光信号,通过光电转换,使电源导通,达到开关的效果。文中阐述了这种光控的供电方式的理论依据和实现方式,排除了日光等因素的干扰,并对该方法进行了验证。通过试验证明,该方法操作简单,实用性强,很适用于一些不适合人为操作的场合。     

EchSGB远距离照明条件下的焦开关

推导了复变量双曲余弦平方-高斯光束(EchSGB)被无光阑透镜聚焦后的轴上光强分布公式,在此基础上通过数值计算和分析发现,EchSGB只有在远距离照明条件下才存在焦开关现象.焦点跃变位置随光束参数和对应高斯光束的菲涅尔数不同而变化,得到了EchSGB在平顶情形下产生焦开关的相对入射距离为11.13,表明在远距离照明和无光阑透镜精密调焦时,对于EchSGB要考虑焦开关现象的影响.     

开关结构对a-SiTFT-LCD光学特性的影响

分析非晶硅薄膜晶体管在a-SiTFT-LCD中的开关特性，讨论这种开关结构中的主要功能膜材料尺寸与性能参量、光刻制备工艺，存储电容以及栅脉冲延迟效应等对a-SiTFT-LCD的通断电流比，信号响应与保持特性，图像亮度与对比度等光学特性的影响。     

AWG and EDFA based optical packet switch using feedback shared loop buffer memory

Optical packet switching provides high speed, data rate/format transparency, efficient use of bandwidth and flexibility. The major problem in the implementation of “all-optical” switching is contention which occurs when two or more packets arrive at the same time for the same destination. To resolve the contention, we have proposed an optical packet switch architecture based on WDM loop buffer memory in the feedback configuration. In that architecture, the contending packets are stored in a loop buffer module, and routed in the free time slots. The buffering duration in the recirculating loop is limited by a circulation limit. The analysis was been done to obtain the maximum number of allowed circulations. This paper proposes improved version of that optical packet switch architecture, to increase the number of maximum allowed circulations. The modification is done either by adding an extra erbium doped fiber amplifier (EDFA) in the original switch or by replacing the core space switch with arrayed waveguide grating (AWG). The performance analysis has been done by the simulations.     

PTS装置工作模式及波形调节

为了对即将建成的PTS装置的实验能力进行分析,对装置的工作模式及波形调节能力进行了分析。装置具有三种工作模式:短脉冲模式、长脉冲模式和波形调节模式。在不同的工作模式下,装置可以进行不同负载的实验研究。在基本工作模式下,在15 nH负载上输出前沿90 ns、幅值8~10 MA脉冲电流。通过电路模拟,对装置在三种工作模式下预计的负载电流输出进行了分析,短脉冲模式下装置负载电流的上升时间约90 ns,长脉冲模式时约200 ns,波形调节模式时可以达到400 ns。模拟结果表明,通过调节激光触发气体开关的触发方式和脉冲输出开关及装置其他参数,PTS装置可以输出脉冲前沿100~400 ns、波形形状在一定范围可调的强电流脉冲。     

一种微型光开关的设计与仿真分析

介绍了一种新型的聚酰亚胺(PI)悬臂梁式电磁驱动微机电系统(MEMS)光开关,并对其总体结构进行了设计与仿真分析.运用有限元分析的方法,设计了永磁体的最佳尺寸并优化了悬臂梁的结构;分析了聚酰亚胺悬臂梁的扭转力、电磁力与挠度的关系.当输入电流为75 mA时,聚酰亚胺悬臂梁达到平衡时的挠度约为1.02 mm,能够满足器件转换光路的要求.