Preparation and Surface Properties of Fluorinated Acrylates Copolymers

Copolymerization of acrylates and styrene (St) with perfluorooctylacyloxyethyl methacrylate (FA) monomer, prepared from the reaction of perfluorooctanoic acid and hydroxymethyl methacrylate, was carried out by solution polymerization. The fluorinated acrylate and St copolymers (PFA) were examined by GPC, FT-IR, and ¹H NMR. The surface tension of the PFA solution in N-methyl pyrrolidone was tested by the drop volume method. The results showed that the surface tension of the PFA solution decreased in exponential decay with increase of the PFA concentration, and the surface tension of the solution also decreased with increased addition of the FA monomer in the copolymer at the same concentration. Meanwhile, the adsorption of the PFA macromolecules in the air–solution interface increased and enrichment of the fluorinated segments on the solution surface occurred. The studies of the surface free energy, polarity, fluorine content, and morphology of the PFA films illustrated that the surface free energy and polarity of the PFA films were decreased with the augment of the FA monomer in the copolymers, and that the fluorine content and the surface roughness were increased. The surface free energy of the PFA film was as small as 16.6 mN·m^?1. The surface properties of the PFA copolymers obtained by one shot feed during polymerization were superior to those obtained by continuing feed procedure. More fluorine segregation occurred and induced the formation of a fluorine-enriched surface if the PFA copolymer was postheated. The posttreatment was thus beneficial to the improvement of the surface properties of the PFA film.     

Relationship between Dispersive Surface Tension and Density and Molecular Weight of Solvents and Polymers

The surface and interfacial properties of polymers are important for their applications. Generally, the surface property is quantitatively characterized by the surface tension or surface tension component parameters, which are obtained with the contact angle technique. However, the contact angle technique has an inherent problem, contact angle hysteresis phenomenon, which will result in many incredible surface tension data. In order to find a simple and easy method to estimate the rationality of a surface tension result, the relationship between dispersive surface tension component and density and molecular weight is researched in this work. It is found that for 30 organic solvents, there is a good relationship between the dispersive surface tension r^d and the parameter . In addition, for 12 polymers, when the molecular weight is replaced with the molecular weight of the repeat unit, there is still the same relationship as for small liquids. However, because it is difficult to judge the accuracy of the published dispersive data of the polymers, the found experiential relationship needs further confirmation, requiring more reliable published data.     

Prediction of Structure and Energy of Trans-1,4-Polybutadiene Glassy Surface by Atomistic Simulations of Free-Standing Ultrathin Films

Atomistic modeling of amorphous trans-1,4-polybutadiene (TPBD), using molecular mechanics and molecular dynamics (MD) simulations, is performed to generate three-dimensionally periodic bulk and two-dimensionally periodic thin film condensed phases. The condensed structures are constructed using multiple polymer chains. Structural and energetic relaxations and sampling of properties are performed using MD in the canonical ensemble (NVT) by a procedure that relieves local high-energy spots and brings the system to realistic thermodynamic states. The calculated surface energy for TPBD, 30.72 erg/cm², is in excellent agreement with the reported experimental value of 31 erg/cm². The structure of the surface layers is probed in terms of the atomic mass density variations, bond-bond orientation function profiles, and the distribution of the dihedral angles about the rotatable backbone bonds. The thickness of the surface layer over which the density varies smoothly but rapidly is found to be approximately 15 Å. The level of agreement of the calculated surface energy with the experimental value is superior in comparison to previous investigations in the literature using the atomistic approach for flexible polymers.     

Metallic nanowires for subwavelength waveguiding and nanophotonic devices

Plasmonics is a rapidly developing field concerning light manipulation at the nanoscale with many potential applications, of which plasmonic circuits are promising for future information technology. Plasmonic waveguides are fundamental elements for constructing plasmonic integrated circuits. Among the proposed different plasmonic waveguides, metallic nanowires have drawn much attention due to the highly confined electromagnetic waves and relatively low propagation loss. Here we review the recent research progress in the waveguiding characteristics of metallic nanowires and nanowire-based nanophotonic devices. Plasmon modes of both cylindrical and pentagonal metallic nanowires with and without substrate are discussed. Typical methods for exciting and detecting the plasmons in metallic nanowires are briefly summarized. Because of the multimode characteristic, the plasmon propagation and emission in the nanowire have many unique properties, benefiting the design of plasmonic devices. A few nanowire-based devices are highlighted, including quarter-wave plate, Fabry-Prot resonator, router and logic gates.     

45°斜孔反射镜的简易加工

介绍４５°斜孔反射镜粗磨成形的简易加工方法以及所需的设备和工装。     

NOVEL FORMATION AND DECAY MECHANISMS OF NANOSTRUCTURES ON THE SURFACE

For decades the research on thin-film growth has attracted considerable attention as these kinds of materials have the potential for a new generation of device application. It is known that the nuclei at the initial stage of the islands are more stable than others and certain atoms are inert while others are active. In this paper, by using kinetic Monte Carlo simulations, we will show that, when a surfactant layer is used to mediate the growth, a counter-intuitive fractal-to-compact island shape transition can be induced by increasing deposition flux or decreasing growth temperature. Specifically, we introduce a reaction-limited aggregation (RLA) theory, where the physical process controlling the island shape transition is the shielding effect of adatoms stuck to the stable islands on the incoming adatoms. Moreover, the origin of a transition from triangular to hexagonal and then to inverted triangular as well as the decay characteristics of three-dimensional islands on the surface and relations of our unique predictions with recent experiments will be discussed. Furthermore, we will present a novel idea to make use of the condensation energy of adatoms to control the island evolution along a special direction.     

应用双面电极的PLZT横向电光调制器电场的精确解

使用保角变换方法导出了横向电光调制器中双面电极结构的电场和电容的解析表达式，给出了用于ＰＬＺＴ电光陶瓷介质中二次电光效应分析的电场分布的物理图像。通过计算对比表明，双面电极结构电极边级区域由于过剩双折射引起的强度调制非均匀性较单面电极有所改善。     

Monte Carlo simulations of catalytic CO oxidation on fractal surfaces of dimension between two and three

We present a method for generating fractal surfaces of dimension between two and three. By using the method, five fractal surfaces with dimension 2.262, 2.402, 2.524, 2.631, and 2.771 are created. For each of these surfaces, the reaction of carbon monoxide and oxygen is simulated by using a Monte Carlo method based on the ZGB model [Phys. Rev. Lett. 24 (1986) 2553]. The results show that the catalytic CO oxidation proceeds more efficiently on a surface with higher fractal dimension. It is also found that as the fractal dimension of the surface becomes higher, the first-order kinetic phase transition point (y₂) is shifted to a higher partial pressure of CO. This implies that poisoning of the catalyst surface due to CO segregation sets in at a higher CO partial pressure for surfaces with more complexity.     

Advanced Materials Processing by Adsorption Control

Precise control and knowledge of surface structures are essential inorder to meet the requirements of today's and future materials. One possiblegrowth technique capable of meeting the requirements is atomic layer epitaxy(ALE). ALE is based on sequentially applied saturated gas-solid reactions,which provide the means for adsorption controlled material deposition atatomic layer level. In this paper the potentiality of the use of porousmaterials in a detailed study of adsorption controlled growth is discussed.At the same time the study promotes the application of adsorption controlledmaterials processing for advanced catalysts manufacturing.     

Controlling Surface Interactions with Grafted Polymers

The interactions between surfaces modified with grafted polymers is studied theoretically. The aim of this work is to find polymer surface modifications that will result in localized attractive interactions between the surfaces. The practical motivation of the work is to find means to control the distance between bilayers and solid supports in supported membranes. Two theoretical approaches are used, the analytical treatment of Alexander and a molecular theory. It is found that grafting each end of the polymer to each surface results in an interaction with a well defined minimum. The location of the minima is found to be very close to the thickness of the polymer layer when the chains are grafted to only one of the surfaces. The predictions of the analytical theory are in excellent agreement with the molecular approach in this case. It is found that increasing the surface coverage increases the strength of the interaction. However, increasing the polymer chain length at fixed surface coverage results in a decrease of the free energy cost associated with separating the surfaces from their optimal distance. For the cases in which grafting to both surfaces is not possible, the molecular theory is used to study the effect of functionalizing segments of the chain to achieve an attractive well. It is found that by functionalizing the free end-groups of the polymers with segments attracted to the membrane, the range of the attractive interaction is significantly larger than the thickness of the unperturbed layer. Functionlizing the middle segments of the chains results in a shorter range attraction but of the same strength as in the end-functionalized layers. The optimal polymer modification is found to be such that the functionlized groups are attracted to the bare surface but are not attracted to the grafting surface. The relevance of the results to the design of experimental surface modifiers is discussed.