Mathematics learning support and engagement in first year engineering

This paper considers the effects of both free optional mathematics learning support and engagement on the mathematics performance in a foundation mathematics subject of a cohort of engineering students entering university with poor mathematical skills. New engineering students were directed to either a foundation or standard mathematics subject based on the results of a placement test. For students in the foundation subject, it was found that high levels of learning support were associated with greater improvement over the semester. Some form of learning support was used by 57.9% of the students, a reasonably high proportion of the cohort. Some factors for this high level of use of learning support are considered. One possible factor, the placement test, appears to have had a positive effect. Engagement in the subject activities as measured by tutorial attendance and learning management system use was found to have a positive association with final mark. Students who utilized a high level of learning support were more likely to be more engaged with the subject, making it impossible to draw conclusions about improvements being solely due to the use of learning support.     

弓张式超磁致伸缩材料换能器的设计与分析

为了提高超磁致伸缩换能器的作动行程,以获得足够大的发音强度,并使之满足发音装置体积小、装配零件少的要求,结合超磁致伸缩材料（GMM）的优良特性,提出一种基于三角放大原理的弓张式GMM换能器。该换能器以GMM棒作为驱动元件,通过固定弓张结构的一端,将双向输出转变为单向输出,同时利用柔性铰链结构,进一步增大换能器的位移输出。通过分析换能器的工作原理,计算得到其理论放大倍数为2.73,与所建立的有限元仿真模型计算得到的放大倍数2.8相近。制作了试验样机并搭建了相应的试验系统,得到在1 kHz范围内换能器最大输出位移为15.5 m,与仿真结果14.058 m相近。提出的弓张结构实现了换能器的位移放大,相应的分析方法也较好地反映了换能器的输出特性。     

低速气流三参数动态测量软件初探

本文采用虚拟仪器概念和技术,构建了三孔探针动态测量系统。该系统集成了高速数据采集、储存及现代数据处理模块,通过该系统可动态显示低马赫数下压气机内部流场的总压、静压、速度矢量等物理参数的变化趋势,并可对动态信号进行时域显示和频域分析。系统还具备自动标定、零漂消除及线性度拟合的功能,实现了流场动态测试技术在线处理与测试同步进行的目的。     

Optical Measurement of φ750 mm Telescope System

为了探测更高轨道的空间目标,研制了一台通光口径为φ750 mm的望远镜.该望远镜为主焦点光学系统,由一片二次非球面反射元件和四片透射元件组成,具有大视场(4°),大相对孔径(1∶1.32)和宽光谱(500～800 nm)的特点.本文以该望远镜的研制为基础,介绍了其光学系统各个元件的单独检测和系统装调完成后的整体检测方法和过程.采用样板法对系统中的球面透射元件进行了单独检测,采用透射无像差补偿器法对二次非球面反射镜进行了单独检测,采用反射无像差补偿器法对组合起来的透射校正镜组进行了检测,并且对系统装调对准之后的光学系统进行室内平行光管和室外对星观测两种方法进行检测,测量结果均满足设计要求,其中球面透镜的面形误差小于0.1个光圈,反射元件和透射元件非球面表面的面形误差均优于λ/30(λ=632.8 nm),透射校正镜组的波像差优于λ/30(λ=632.8nm).光学系统整体检测结果表明,室内和室外检测结果一致,其像面的80％能量集中度直径在4°的全视场范围内均小于2个像元,达到了设计的成像要求.     

���ڸ�ά���ݵĸ���Hotelling'sT-square ����

The paper is concerned with the two-sample meantesting problem in high-dimension settings. We propose a composite Hotelling'sT-square test, establish its asymptotical normality and study its local power.The finite-sample priority of the proposed test over existing high-dimensionaltests is shown by simulations and illustrated by a real data-set analysis.     

不同线宽结构杂散光Kirk模型分析

采用Kirk测量法的杂散光模型研究了杂散光在不同线宽结构上杂散光的光强变化,通过图像对比度分析了杂散光对不同线宽结构的影响。基于Matlab软件仿真分析表明:线宽一定时,线条越稀疏,图像对比度越低,杂散光对成像图形分辨力的影响越大;线条线间比一定时,线宽尺寸越小,图像对比度越低,杂散光对成像图形分辨力的影响也越大。所以杂散光对线宽较小并且线条稀疏空间结构所成的图形造成的影响较大。光刻; Kirk测量法; 杂散光; 点扩散函数; 图像对比度     

Preparation of novel antimicrobial-modified starch and its adsorption on cellulose fibers: Part I. Optimization of synthetic conditions and antimicrobial activities

Antimicrobial-modified starch was synthesized by covalently bonding guanidine polymer (PHGH) with potato starch via coupling reaction. Orthogonal tests were applied to optimize the reaction conditions. The coupling efficiency could reach 90.21% at the optimal conditions: temperature, 70 °C; time, 2 h; PHGH/starch, 120 wt.%; GDE/starch, 8 wt.%; pH, 11. PHGH modified starches exhibited high antimicrobial activities against both E. coli and S. aureus. Shaking flask method was more suitable for current non-released modified starches than diffusion method to evaluate the antimicrobial activities. In the presence of 1.0 wt.% PHGH in wood fibers, the growth inhibition reached almost 100%. The AFM results also demonstrated that the antimicrobial mechanism of PHGH was to destroy the membrane of the cells.     

基于相关分析的LED路灯光强分布测试步距角优化研究

优化LED路灯光强分布测试系统的测试步距角可以较大程度地提高LED路灯测试的效率。选择不同的测试步距角对LED路灯的光强分布进行测试,将1°测试步距角所测得的路灯光强分布视为真值,采用相关分析的方法研究在较大步距角下所测得的路灯光强分布与真值之间的近似程度。研究结果显示,当相关系数要求在98%左右时,可以选择15°测试步距角对LED路灯的光强分布进行测试,相对于真值测试,在此步距下LED路灯的测试时间减少了98%以上,极大地提高了测试效率。     

基于离子液体的超级电容在3 V及65 oC老化条件下的铝碳界面效应

相比于传统乙腈电解液体系的超级电容器,离子液体基超级电容器具有工作窗口电压高,能量密度大,不可燃等优点,适用于碳中和时代清洁但不稳定电力领域的大规模储能。然而,目前的工作主要集中在对纽扣型离子液体-超级电容器的研究上,有关软包式离子液体-超级电容器的长循环寿命评测的报道较少。构建可靠的超级电容器用于长时间测试或在高温下开展加速老化测试,应考虑集流体/电极界面的良好接触,以最小化电荷转移电阻。本文以包覆不同碳层的泡沫铝为集流体,研究了超级电容器新系统中的碳-铝界面效应。通过环氧树脂薄膜碳化得到的均匀无定形碳层,相比通过PVDF粘附石墨烯碳层,赋予了铝相和碳相更强的相互作用。此外,为了充分挖掘大离子尺寸的离子液体电解液的潜力,本文采用介孔碳电极实现离子在介孔间的快速扩散。因此,本工作首次制备了由介孔碳电极、离子液体电解液和覆碳三维泡沫铝集流体组成的新结构软包式超级电容器。以自制的容量为37 F的不同软包式超级电容器件,通过3 V、65 ^oC、500 h加速老化试验,研究了其时间依赖性的电化学性能,包括CV测试、恒流充放电测试、电容值、接触电阻、电化学阻抗谱等。相比石墨烯包覆的泡沫铝基器件,无定形碳层包覆的泡沫铝基器件表现出更高的电容保持率。此外,我们还对ESR进行了等效电路拟合,并深入分析了接触电阻、电荷转移电阻、韦伯电阻,研究了C-Al界面对高能量密度超级电容器的高性能和稳定性的影响。500小时老化测试前后的极片表征证实了上述结果。高温、高压条件使粘附石墨烯碳层的泡沫铝界面结构不可靠。而泡沫铝表面原位包覆的碳层在老化过程中表现出较强的相互作用和稳定的结构。这些坚实的数据为面向高能量密度、高功率密度和长循环寿命,进一步优化高窗口电压超级电容器提供了充足的信息。