脉冲高功率离子二极管的动力学模拟

基于等离子体的爆炸发射模型,利用自洽的2.5维的胞中粒子（PIC）模拟程序MAGIC模拟了平板型磁绝缘离子二极管中电子和质子的动力学特性。给出了电压为300kV,外加磁场为2倍临界磁场情况下的二极管特性,阴阳极间隙中带电粒子的空间和相空间分布,以及净电荷密度分布和电场分布,结果表明,引出束流密度比单离子Child-Langmuir公式计算的结果大5倍;外加磁场导致在阴极附近形成虚阴极。空间电荷使得阴阳极间隙中电场扰动和增强。     

激光触发多级多通道开关研究

研究了200kV激光触发多级多通道开关的运行机理,该开关在直流电压下以四倍频Nd:YAG激光器为触发源进行的实验结果表明：开关触发延迟时间及其抖动随开关电压、激光能量和充气压力上升呈指数下降趋势,对混合气体则随气体密度上升而上升。随透镜焦距的增大延迟时间及其抖动呈上升趋势。该开关实现了多通道放电。     

离子通道电子束回旋脉塞的等离子体波效应

研究了离子通道回旋电子束脉塞（ICECM）中的等离子体波非线性效应。利用流体理论与自洽非线性理论方法对ICECM中等离子体波效应的微观机理进行了分析。研究发现,等离子体波加强了电子束的纵向群聚,束-波互作用的能量交换效率及系统增益得到明显提高。数值模拟计算表明,对于中等等离子体密度、1.5kA电流和1MV加速电压的电子束,系统能够获得的脉冲功率和频率分别为200MW和280GHz的毫米波束。     

电子束泵浦氩中高能电子分布的理论计算

改进了文献中报导的Boltzmann基本方程。与Boltzmann基本方程相比,改进后的Boltzmann方程更全面地描述了电子与基态氩原子碰撞的物理过程,并能计算出整个能量区间的电子分布。利用Boltzmann基本方程和改进的Boltzmann方程,对电子束泵浦氩中能量大于氩原子第一激发态能量(11.56eV)的高能电子分布函数进行了理论计算。计算中,选取了电子碰撞氩的微分电离截面和激发截面的解析表达式。对计算所得的稳态电子分布函数以及达到稳态分布所需的特征时间进行了分析和讨论。     

电子束、离子辅助和离子束溅射三种工艺对光学薄膜性能的影响

运用电子束、离子辅助和离子束溅射三种镀膜工艺分别制备光学薄膜,包括单层氧化物薄膜和增透膜,然后采取一系列测试手段,如Zygo轮廓仪、原子力显微镜、表面热透镜技术和X射线衍射等技术,来分析和研究不同的工艺对这些薄膜性能的不同影响,以判断合理的沉积工艺。     

Dislocation density crystalline plasticity modeling of lath martensitic microstructures in steel alloys

A three-dimensional multiple-slip dislocation density-based crystalline formulation, specialized finite-element formulations and Voronoi tessellations adapted to martensitic orientations were used to investigate large strain inelastic deformation modes and dislocation density evolution in martensitic microstructures. The formulation is based on accounting for variant morphologies and orientations, retained austenite and initial dislocation densities that are uniquely inherent to martensitic microstructures. The effects of parent austenite orientation and retained austenite were also investigated for heterogeneous fcc/bcc crystalline structures. Furthermore, the formulation was used to investigate microstructures mapped directly from SEM/EBSD images of martensitic steel alloys. The analysis indicates that variant morphology and orientations have a direct effect on dislocation density accumulation and inelastic localization in martensitic microstructures, and that lath directions, orientations and arrangements are critical characteristics of high strength martensitic deformation and behavior.     

新型热作模具钢CH95的高温力学和抗磨性能研究

对比研究了CH95钢与H11钢的高温力学及抗磨性能,分析了2种模具钢的组成和微结构对其高温力学性能和抗磨性能的影响,采用透射电子显微镜观察分析了CH95钢试样中碳化物的形貌．结果表明：CH95钢与H11钢相比具有优异的高温力学性能;其优异的高温力学性能和抗磨性能归因于其特定的微观结构;CH95钢中细小且呈弥散分布的MC、M2C强化相的含量较高,使得其在高温下仍可保持优良的力学性能和抗磨性能;稀土可加速CH95钢表面致密氧化物层的形成,提高其强度、韧性、耐磨性和抗剥离能力;而经离子氮化处理后形成的细小且呈弥散分布的合金氮化物亦可起弥散强化作用,从而使得CH95钢在高温高载荷下的抗磨性能明显优于H11钢．     

On the two methods of kinetic theory of ECRM

The kinetic theory based on the expansion of local field in the guiding center coordinate system, presented by paper[1]–[3], has successfully developed into a theoretical system. The mathematical background and physical explanation of setting up the guiding center coordinate system is expounded in the paper. By using the methods of the guiding center and waveguide coordinate systems respectively, the same dispersion equations for interaction of an axially symmetrical single momentum electron beam with TE_mn field in the circular waveguide are rigorously derived. A number of mistakes in paper[4] are indicated as well.     

Analogue of Aharonov-Bohm effect in spin gauge theory

We predict the possibility of observing analogue of the Aharonov-Bohm effect due to long range interaction between spins originating in the framework of spin gauge theory developed earlier. The effect is predicted for both electrons (fermions) and photons. Appropriate experimental set-ups are suggested.     

非相干空间孤子的自陷行为

用相干密度法研究了一维非相干光束在饱和对数型光折变介质中的自陷行为,发现在传输过程中孤子的形态可具有稳态和周期性振荡的特点,具体取决于入射光束的初始宽度、相干特性和材料的非线性响应;研究了构成非相干光束的相干组份的传播行为,发现各相干组份的强度和光束宽度沿纵向发生周期性变化,峰值位置沿横向发生周期性变化.另外,利用横向相干宽度研究了非相干光束在各种传输状态下相干特性的变化,从而进一步解释了非相干光束在不同传播状态下的演化特性.