二氧化碳多相催化加氢的新进展

就近年来关于ＣＯ２活化、几个重要的ＣＯ２多相催化加氢反应及廉价氢的供给的研究进展进行综述。参考文献３４篇。     

一种用于空气中二氧化碳现场测定的新方法

一种用于空气中二氧化碳现场测定的新方法于爱民，杨广德，王锐，金钦汉（吉林大学化学系，长春１３００２３）关键词微波诱导等离子体，离子化检测器，气相色谱仪，二氧化碳二氧化碳在植物生长代谢及其生态平衡过程中起着重要作用，现场测定二氧化碳是目前农业、环境科学...     

SiO_2负载钼催化剂的合成及其催化乙烯二聚、同系化和歧化的反应性能

从单核及双核二甲胺钼络合物出发,制备了SiO_2负载的钼催化剂。程序升温分解实验(TPDE)及红外测试表明,双核钼络合物与SiO_2作用生成双钼中心物种,此物种可催化乙烯的二聚反应。280℃活化后此双钼中心物种变成单钼中心物种,单钼物种只催化乙烯的同系化及歧化反应。     

A New Efficient Synthesis of p-Nitrocalix[4]arene

A new efficient synthesis of p-nitrocalix[4]arene from calix[4]arene by using nitrogen dioxide is described.The compound is an useful intermediates for the introduction of other functional groups to obtain N containing substituted calix[4]arene.The reaction mechanism is briefly discussed.     

Electrokinetic and contact angle measurements of grafted carbon fibers

 The grafting method that has successfully been applied to methacrylic acid and liquid crystalline monomers was expanded to prepare amphoteric carbon fiber surfaces using 2-(N,N-dimethylamino)ethyl methacrylate as monomer. The obtained carbon fiber surfaces were characterized by contact angle and ζ-potential measurements. The expected basic behavior was not observed, instead an amphoteric character of the modified carbon fiber surface was found. The fiber surfaces display a basic character in the acidic pH-range, while they are acidic in the alkaline part of the pH-scale. An important influence is derived from the amount of initiator used to graft the monomers onto the fibers. The smaller the initiator concen-tration used during polymerization, the larger the amount of amino functionalities introduced to the carbon fiber surface. The wetting behavior versus water depends on the overall conformation of the immobilized polymer. During immersion into water the polymer acts hydrophobic, while during emersion, a hydrophilic character is observed, probably derived from conformational changes and swelling during the contact angle measure-ments in water. Received: 9 June 1998 Accepted: 13 August 1998     

Adsorption, diffusion and desorption of chlorine on and from rutile TiO2{110}: a theoretical investigation.

The adsorption, diffusion and desorption of chlorine on and from stoichiometric, reduced and partially reduced (defective) rutile TiO2{110} are investigated using ab initio density functional theory (DFT) calculations. Theoretical results are compared with experimental investigations, and microkinetic simulations based on DFT values are then used to verify the diffusion mechanisms assumed in the experimental investigations.     

流动注射化学发光法测定自来水中二氧化氯

在pH12．5的NaOH—KCl缓冲介质中，ClO2直接氧化Luminol能产生很强的化学发光，而且发光强度在一定的范围内与ClO2的浓度呈线性关系，据此建立了流动注射化学发光测定ClO2的新方法。探讨了最佳的发光条件，测定ClO2的线性范围为0．5—200μg／L，检出限为0．3μg／L。本法简便、怏速、灵敏，选择性和重复性较好，应用于自来水中剩余ClO2的测定，结果满意。     

阴极支撑型固体氧化物燃料电池的制备与测试

采用固相反应法合成A缺位的(La_0.8Sr_0.2)_0.95MnO₃(LSM95)作为阴极材料,Zr_0.9Sc_0.1SO_1.95(SSZ)商业粉体作为电解质材料,溶胶-凝胶法合成的La_0.8Sr_0.2Cr_0.5Mn_0.5O₃-(LSCrM)作为阳极电催化材料,利用流延、共烧结及浸渍法得到结构为LSCrM-CeO₂|SSZ|3YSZ-LSM95的阴极支撑型固体氧化物燃料电池,分别在氢气气氛和甲烷气氛中进行电化学性能测试. 结果表明,浸渍0.11 g·cm ^-2 CeO₂的LSCrM-CeO₂|SSZ|3YSZ-LSM95单电池在以CH₄为燃料时,600、650、700、750和800 ^oC下的功率密度分别为1.68、4.70、12.40、28.08和54.78 mW·cm ^-2,表现出一定的电化学性能和较好的稳定性.     

碳纳米管的共价修饰

碳纳米管(carbon nanotubes, CNTs)的溶解性和分散性较差是目前制约其广泛应用及在一些有特殊要求的领域(如生物技术)应用的主要原因之一. 对CNTs进行共价修饰是改善其溶解性和分散性的有效方法之一. 目前CNTs的共价修饰主要通过两类反应来实现: 羧基的衍生反应和直接加成反应. 介绍了基于这两种反应的几种共价修饰方法, 比较了各种修饰方法的优缺点及其对CNTs的溶解性和分散性的改善效果.     

Ru/Mn-Ce/TiO2催化剂催化湿式氧化丁二酸的反应活性和动力学研究

在二氧化钛载体中通过掺杂Ru，Mn，Ce制备了一系列用于催化湿式氧化的催化剂，利用XRD，TEM，BET等手段对催化剂进行了表征．在反应温度T=210～270℃，氧分压Po2=2．1MPa条件下，在间歇式高压反应釜中对丁二酸进行了降解实验．催化剂在反应中有很高的催化活性．催化剂在30min内对丁二酸降解的COD去除率为54．4～98．3％．Ru及Mn，Ce的氧化物对催化活性都有促进作用．建立了丁二酸催化湿式氧化的一级分段动力学模型．基于COD的一段及二段反应的活化能分别为43．74kJ／mol和54．28kJ／mol．