Continuous reaction system to investigate the dispersion polymerization of vinyl monomers in supercritical carbon dioxide

A laboratory‐scale continuous reaction system using a stirred tank reactor was assembled in our laboratory to study the dispersion polymerization of vinyl monomers in supercritical carbon dioxide (scCO₂). The apparatus was equipped with a suitable downstream separation section to collect solid particles entrained in the effluent stream from the reactor, whose monomer concentration could be measured online with a gas chromatograph. The dispersion polymerization of methyl methacrylate in scCO₂ was selected as a model process to be investigated in the apparatus. The experiments were performed at 65 °C and 25 MPa with 2,2′‐azobisisobutyronitrile as the initiator and a reactive polysiloxane macromonomer as a surfactant to investigate the effect of the mean residence time of the reaction mixture on the monomer conversion, polymerization rate, polymer molecular weight, and particle size distribution. The results were compared with those obtained in batch polymerizations carried out under similar operative conditions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4122–4135, 2006     

Measurement and prediction of solubilities and diffusion coefficients of carbon dioxide in starch–water mixtures at elevated pressures

The solubility and diffusion coefficient of carbon dioxide in intermediate‐moisture starch–water mixtures were determined both experimentally and theoretically at elevated pressures up to 16 MPa at 50 °C. A high‐pressure decay sorption system was assembled to measure the equilibrium CO₂ mass uptake by the starch–water system. The experimentally measured solubilities accounted for the estimated swollen volume by Sanchez–Lacombe equation of state (S‐L EOS) were found to increase almost linearly with pressure, yielding 4.0 g CO₂/g starch–water system at 16 MPa. Moreover, CO₂ solubilities above 5 MPa displayed a solubility increase, which was not contributed by the water fraction in the starch–water mixture. The solubilities, however, showed no dependence on the degree of gelatinization (DG) of starch. The diffusion coefficient of CO₂ was found to increase with concentration of dissolved CO₂, which is pressure‐dependent, and decrease with increasing DG in the range of 50–100%. A free‐volume‐based diffusion model proposed by Areerat was employed to predict the CO₂ diffusivity in terms of pressure, temperature, and the concentration of dissolved CO₂. S‐L EOS was once more used to determine the specific free volume of the mixture system. The predicted diffusion coefficients showed to correlate well with the measured values for all starch–water mixtures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 607–621, 2006     

Characterization and electrical properties of polypyrrole/multiwalled carbon nanotube composites synthesized by in situ chemical oxidative polymerization

This study describes the preparation of polypyrrole (PPy)/multiwalled carbon nanotube (MWNT) composites by in situ chemical oxidative polymerization. Various ratios of MWNTs, which served as hard templates, were first dispersed in aqueous solutions with the surfactant cetyltrimethylammonium bromide to form micelle/MWNT templates and overcome the difficulty of MWNTs dispersing into insoluble solutions of pyrrole monomer, and PPy was then synthesized via in situ chemical oxidative polymerization on the surface of the templates. Raman spectroscopy, Fourier transform infrared (FTIR), field‐emission scanning electron microscopy (FESEM), and high‐resolution transmission electron microscopy (HRTEM) were used to characterize the structure and morphology of the fabricated composites. Structural analysis using FESEM and HRTEM showed that the PPy/MWNT composites were core (MWNT)–shell (PPy) tubular structures. Raman and FTIR spectra of the composites were almost identical to those of PPy, supporting the idea that MWNTs served as the core in the formation of a coaxial nanostructure for the composites. The conductivities of these PPy/MWNT composites were about 150% higher than those of PPy without MWNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1413–1418, 2006     

Gas transport through homogeneous and asymmetric polyethersulfone membranes

Both homogeneous and asymmetric polyethersulfone (PES) membranes were prepared by solvent casting. The sorption and permeation behavior of CO₂, O₂, and N₂ using these two kinds of cast PES membranes and commercially available homogeneous PES film was investigated to extract the pressure dependence of gas permeability and the permselectivity for CO₂ relative to N₂, and to confirm the validity of the working assumption that a skin layer in an asymmetric membrane can be essentially replaced by a thick homogeneous dense membrane. The pressure dependence of the mean permeability coefficient to CO₂ in homogeneous membranes obeys the dual-mode mobility model. The ideal separation factor for CO₂ relative to N₂ at an upstream pressure of 0.5 MPa attains ca. 40, while the permeability to CO₂ is about 2.7 Barrer at the same upstream pressure. The same separation factor in asymmetric membranes amounts to 35. The diffusion behavior for the skin layer in an asymmetric membrane with a thin skin layer can be simulated approximately by that in a homogeneous dense membrane. © 1993 John Wiley & Sons, Inc.     

STUDIES ON THE PREPARATION OF ZINC-CONTAINING ACTIVATED CARBON FIBERS AND THEIR ANTIBACTERIAL ACTIVITY

1. INTRODUCTION Microbial pollution will bring about various problems in industry and other vital fields, such as causing decomposing of materials, harming people抯 health. In order to reduce these problems, new antibacterial materials have been demanded. Recently, much attention has been paid to inorganic materials including zinc oxide [1~4]. These inorganic antibacterial materials are now substituting for organic materials to avoid releasing noxious organic molecules harmful to humans;…     

后交联型St-DVB大孔吸附树脂对低级醇类的吸附性能研究

分别在静态和动态条件下研究了Friedel—Crafs后交联型聚苯乙烯-二乙烯基苯(St-DVB)大孔吸附树脂对水溶液中多种低级一元醇的吸附性能，测定静态吸附等温线和动态吸附曲线，并分别按照Langmuir和Freundlich模型进行拟合．结果显示，树脂对水中低浓度低级一元醇的吸附过程属于放热的物理吸附过程，树脂吸附能力随着一元醇碳原子数的增加，即分子内疏水基团质量的增加而增加；树脂对直链醇的吸附能力稍强于同分异构的支链醇．     

Carbon anode materials from polysiloxanes for lithium ion batteries

Three kinds of silicon-containing disordered carbons have been prepared by pyrolysis of polysiloxanes with different amounts of phenyl side groups. X-ray powder diffraction, X-ray photoelectron spectroscopy and electrochemical capacity measurements were performed to study their behaviors. Graphite crystallites, micropores, and silicon species affect their electrochemical performances. All of them present high reversible capacities, >372 mAh/g. Since the graphite crystallites are very small, they contribute very little to reversible capacity. The number of micropores produced by gas emission during the heat-treatment process decides whether they exhibit reversible capacity. Si mainly exists in the form C–Si–O and influences the irreversible capacity. There is no evident capacity fading in the first ten cycles, indicating promising properties for these disordered carbons.     

XPS C 1s binding energies for fluorocarbon–hydrocarbon microblock copolymers

Fluorocarbon–hydrocarbon microblock copolymers –(CF₂)_n–(CH₂)_m– (n = 4, 6, 8; m = 6, 8, 10) were synthesized. Binding energies of the C 1s and F 1s peaks of these copolymers were measured using x‐ray photoelectron spectroscopy. The binding energy of the C 1s peaks of the carbon atoms of the hydrocarbon segments was set at 285.0 eV as the binding energy reference. Unexpectedly, the binding energy of the C 1s peak corresponding to the CF₂ group of the microblock copolymers was determined to be ～291.4 eV, which is ～0.8 eV lower than that of the CF₂ group of tetrafluoroethylene. Copyright © 2003 John Wiley & Sons, Ltd.     

Phosphaalkynes—Syntheses,Reactions, Coordination Behavior [New Synthetic Methods (73)]

Organophosphorus compounds have been applied in two ways in chemical synthesis. They can either be used as a reagent in a step of the synthesis (for example, in the Wittig reaction) or they can be incorporated directly into the target molecule. This second application, in particular, has expanded greatly in the last few years with the preparation of low-coordination phosphorus compounds. These include the phosphaalkynes, which are of great interest to organic and inorganic chemists. Phosphaalkynes have been employed in the synthesis of heterocyclic compounds, phosphaarenes and their valence isomers, and polycyclic compounds. Further applications have been the use of phosphaalkynes as new ligand systems in complex chemistry and their cyclooligomerization with organometallic reagents. While the chemical properties of phosphaalkynes have little in common with those of nitriles, they are in many ways very similar to those of the isoelectronic acetylenes.     

Application of kinetic investigations for interpretation ofn-hexane and benzene adsorption on active carbon

Differencies between the mechanism ofn-hexane and benzene adsorption on active carbon were investigated on the ground of kinetic measurements. As it has been stated, the kinetic measurements show fundamental differencies between the mechanism of adsorption in spite of analogy existing in the state of adsorption equilibrium. Within the range investigated, only the adsorption ofn-hexane follows the model of volume filling of micropores. Existence of those differencies is also confirmed by measurements of effective diffusion coefficient values as well as changes of activation energy of the diffusion—adsorption process.

---

Anwendung kinetischer Untersuchungen zur Interpretation des Adsorptionsverhaltens vonn-Hexan und Benzol an Aktivkohle

Zusammenfassung Mittels kinetischer Messungen untersuchte man die Unterschiede im Mechanismus des Adsorptionsverlaufes vonn-Hexan und Benzol an Aktivkohle. Man stellte fest, daß trotz der Analogie im Adsorptionsgleichgewichtszustand die kinetischen Messungen auf prinzipielle Unterschiede im Adsorptionsmechanismus hinweisen. Im untersuchten Bereich verläuft nur die Adsorption vonn-Hexane nach dem Modell der Mikroporenvolumenausfüllung. Die auftretenden Unterschiede wurden auch durch die Berechnungen der Werte der effektiven Diffusionskoeffizienten sowie Änderungen der Aktivierungsenergie des Diffusions-Adsorptionsprozesses bestätigt.