聚酯-聚酯多嵌段共聚物的合成及其动态力学性能

聚酯-聚醚多嵌段共聚物的动态力学性能谱上有两个T_8,不宜做阻尼材料。本文报道聚对苯二甲酸乙二醇酯(PET)-端羟基聚己二酸乙二醇酯(PEA)共聚物(简称嵌段共聚酯),比聚醚-聚酯多嵌段共聚物有更好的相容性。我们研究了PEA的分子量,间苯二甲酸的用量对嵌段共聚酯的结晶度,以及结晶度对嵌段共聚酯的动态力学性能的影响。     

Monolayer films of PS-b-PEO diblock copolymers at the air/water- and an oil/water-interface

 Amphiphilic diblock copolymers consisting of a hydrophobic polystyrene block (PS) and a hydrophilic poly(ethylene oxide) block (PEO) with block sizes of 1000 or 3000 g/mol for both blocks were studied at the air/water and toluene/water interface. Measurements of the film pressure π of spread monolayers at the water surface reveal two limiting regimes of the π−a _m isotherms, in which the mean molecular area a _m is determined either by the size of the hydrophilic or the hydrophobic blocks of the PS-PEO molecules. The interfacial activity of the block copolymers at the toluene/water interface was studied by measuring the interfacial tension σ over a wide range of concentrations. Pronounced differences in the temperature dependence of the interfacial tension were observed, depending mostly on the block length of the hydrophilic PEO block. From the temperature dependence of σ it is inferred that for the block copolymers with the PEO block size of 3000 g/mol the phase inversion temperature (PIT) is well above 60 °C while for those with a PEO block size of 1000 g/mol the PIT is below or near 25 °C in the toluene/water system. Received: 5 February 1998 Accepted: 16 February 1998     

Cis-coordination of the chromate anions in helical Co/Ni block-type polymeric systems. Structural and spectroscopic characteristics of catena(μ-CrO4-O,O′)[Co(HIm)3H2O] and catena(μ-CrO4-O,O′)[Co0.43Ni0.57(HIm)3H2O]

Two polymeric complexes: catena(μ-CrO₄-O,O′)[Co(HIm)₃H₂O] (1) and catena(μ-CrO₄-O,O′)[Co_0.43Ni_0.57(HIm)₃H₂O] (2) (where HIm=imidazole) with a cis-bridging coordination mode of the CrO₄ ²⁻ anion have been synthesized and characterized by X-ray and spectroscopic methods. These crystals were isolated from nine systems of varying reagent molar ratios and three excluding anions: Cl⁻, NO₃ ⁻ and SO₄ ²⁻ exclusively as mer [M(HIm)₃O₃]-type isomers. The unit cell of these isostructural complexes (monoclinic crystal system P2₁ /n) contains two independent helixes, left- and right handed, stabilized by intrahelical and interhelical hydrogen bonding and π–π interaction between pairs of the imidazole rings from neighbouring helixes. The Raman spectra at 77 K of 1 and 2 deconvoluted into lorentzian components revealed the block-type polymeric structure of the complexes. Moreover, the solution studies at millimolar concentrations of 1 and 2 indicated their complete decomposition in water. Four K electronic spectral analysis of the crystals (band deconvolution into gaussian components) enhanced with the data obtained in the polarized light allowed for assignment of the bands to the respective d–d transition (D_4h symmetry). It was found that the metallic centres are independently absorbing species, which supports the suggestion of a block-type structure of the polymers. The respective crystal field parameters for Co and Ni were calculated.     

Hydrogenated polybutadiene–polymethyl methacrylate (HPB–PMMA) block copolymer. I. Synthesis of polybutadiene–polymethyl methacrylate (PB–PMMA) block copolymer

To get hydrogenated polybutadiene-polymethyl methacrylate (HPB-b-PMMA) block copolymer to be used as a compatibilizer for blends of polyolefin/polar polymer, PB-b-PMMA was synthesized by anionic-free radical mechanism transformation polymerization. Selective extraction, gradient elution thin layer chromatography, and oil-oil emulsion separation techniques were tried to attempt to separate the copolymerization products. Hydrogenation of the PB sequence in PB-b-PMMA yielded HPB-b-PMMA. The compatibilizing function of PB-b-PMMA was shown in blending experiments. © 1993 John Wiley & Sons, Inc.     

Dielectric relaxation of poly(ester-ether-carbonate) multiblock terpolymers

The dielectric properties of a series of poly(ester-ether-carbonate) multiblock terpolymers have been investigated as a function of ether and carbonate composition in the frequency range of 10³–10⁶ Hz. The degree of polymerization of the samples was determined by viscosimetry measurements. The weight fraction, degree of crystallinity, and melting temperatures were characterized by means of x-ray diffraction and DSC methods. Dielectric behavior has been discussed in terms of Havriliak-Negami formulation. The variation of the dielectric properties with temperature has been associated with two relaxation processes: a) the -relaxation process observed at low temperature, which is associated to local motion of polar groups attached to both the soft and the hard segments, and b) the process assigned to long-range molecular motions above the glass transition temperature.     

反应挤出法合成S/B多嵌段共聚物的研究

在阴离子引发体系下 ,以双螺杆挤出机为反应器 ,采用丁二烯、苯乙烯混和单体加料方式 ,本体法一步合成了S B多嵌段共聚物 .考察了螺杆转速、进料速率以及不同丁苯配比对反应挤出合成PS及S B嵌段共聚物聚合转化率的影响 .用1 H NMR、IR、DMA、TEM等方法对S B嵌段共聚物进行了表征 ,结果表明共聚物由多个微小的丁二烯嵌段和少量无规段组成 .当丁二烯含量少至 15 %左右时 ,其嵌段可回缩成球状 ,粒径大约在 30～ 5 0nm .该材料的韧性随着共聚物中丁二烯含量的增加而逐渐提高 ,特别是断裂延伸率的提高尤为显著     

Effect of Pluronic F127 on the pore structure of macrocellular biodegradable polylactide foams

Thermally induced phase separation technique was utilized to fabricate biodegradable poly(l ‐lactic acid) (PLLA) macrocellular foams which were capable of being applied in tissue engineering. The block copolymer Pluronic F127 composed of (polyethyleneoxide)‐(polypropyleneoxide)‐(polyethyleneoxide) [(PEO)‐(PPO)‐(PEO)] was used as a porogen. Water/dioxane mixtures with different volume ratios were used as solvents. The addition of Pluronic F127 could induce an appearance of large pores (50–200 μm) besides small pores (10–20 μm) or a change from a solid–liquid phase separation to a liquid–liquid phase separation. The role of Pluronic F127 depends on the water/dioxane ratios in the PLLA/dioxane/water system. The X‐ray diffraction patterns and porosity measurement results showed that Pluronic F127 was crystallized and existed on the pore wall. The effect of Pluronic F127 on changing pore structure is attributed to the occurrence of the interaction of the lipophilic PPO blocks in Pluronic F127 with PLLA clews, consequently, this results in PLLA aggregation and early phase separation on cooling. Copyright © 2004 John Wiley & Sons, Ltd.     

用透射电镜法研究聚(苯乙烯-异戊二烯)二嵌段共聚物微相分离的微区尺寸

本文采用透射电镜(TEM)法,系统地研究了具有不同组成,不同分子量和不同形态结构的聚(苯乙烯-异戊二烯)二嵌段共聚物,并由TEM照片直接测量具有栓状,层状和有规双连续双金钢石(OBDD)结构的PS-PI二嵌共聚物的微区尺寸,讨论了其与分子量的关系。实验证明嵌段共聚物微相分离有规结构的微区尺寸大小与分子量呈2/3的关系。     

α－甲基苯乙烯对HIPS／SBS共混物流变行为及力学性能的影响

用锥板式流变仪研究了α－ＭＳ对ＨＩＰＳ／ＳＢＳ共混物流动行为的影响，结果表明：不同α－ＭＳ用量的共混物和如曲线相似．均随增加τ＿ｗ增大、η＿ａ下降。流动指数，ｎ均小于１为非牛顿假塑性流体。加入少量（约２．５％）α－ＭＳ使共混物熔融指数提高３倍，其总体力学性能变化不大。     

Enhancement of photocurrent generation by honeycomb structures in organic thin films.

A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.