Theoretical study of the ring‐closing reaction of 5′‐AMP to cAMP and H2O in the gas phase

The ring‐closing reaction of 5′‐adenosine monophosphate (5′‐AMP) to generate cyclic 3′, 5′‐adenosine monophosphate (cAMP) and H₂O was theoretically investigated at the B3LYP/6‐31G**level. It was found that the ring‐closing reaction of 5′‐AMP may proceed in a synchronous way or in a stepwise way. For the latter, the reaction is a multichannel elimination reaction including inner H transfer. The potential energy surface of Path 3 is lowest in all the ring‐closing reaction paths. In addition, H shuttling reaction with the participation of a water molecule to act as a shuttle were also studied at the same level. The calculations indicate that the participation of a water molecule facilitates hydrogen transfer reaction. Our present calculations rationalized all the possible reaction channels. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Useful dual Diels-Alder behavior of 2-azetidinone-tethered aryl imines as azadienophiles or azadienes: a beta-lactam-based stereocontrolled access to optically pure highly functionalized indolizidine systems

Imines derived from 4-oxoazetidine-2-carbaldehydes have been found to be versatile Diels-Alder reagents in that they exhibit two reactivity patterns. 2-Azetidinone-tethered imines undergo diastereoselective reaction with Danishefsky's diene in the presence of different Lewis acids. The effect of the amount of catalyst on the conversion rate as well as on the product ratio has been studied. Under standard reaction conditions, indium(III) chloride and zinc(II) iodide provided the best yields, and indium(III) triflate the highest diastereoselectivity in the Lewis acid promoted aza-Diels-Alder cycloaddition. Treatment of the aforementioned imines with cyclopentadiene, 2,3-dimethyl-1,3-butadiene or 3,4-dihydro-2 H-pyran led to cycloadducts arising from inverse electron-demand condensation involving the beta-lactam-tethered aryl imine as the heterodiene component. In addition, the first methodology for preparing indolizidines from beta-lactams has been developed. This process involves amide bond cleavage of the beta-lactam ring in the aza-Diels-Alder cycloadducts with concomitant cyclization. Full chirality transfer occurs when the reaction is performed with an enantiomerically pure substrate.     

Ring expansion approach for the synthesis of the (3S,4S)-hexahydroazepine core of balanol and ophiocordin

A new and efficient formal total synthesis of (3S,4S)-balanol, a potent protein kinase C inhibitor, was accomplished from tri-O-acetyl-d-glucal. Balanol and ophiocordin consists of a chiral hexahydro azepine-containing fragment and a benzophenone fragment. The azepine core was prepared in chiral form through intramolecular aza Wittig reaction. A triphenylphosphine mediated ring expansion process was employed to form the seven-membered nitrogen heterocycle. The aldehyde equivalent key intermediate was treated with triphenylphosphine to give the azepine core. To demonstrate the applicability of the new route, a synthesis of the balanol is described.     

Coprecipitation with metal hydroxides for the determination of beryllium in seawater by graphite furnace atomic absorption spectrometry

Coprecipitation first with magnesium hydroxide, next with tin(IV) hydroxide is developed for the determination of traces of beryllium in sea-water. To a 200-ml sample is added a sodium hydroxide solution to form magnesium hydroxide at pH 11.5, on which beryllium is quantitatively coprecipitated. The precipitate is separated by centrifugation and dissolved in 2 ml of 12 mol/l hydrochloric acid. The resulting solution (ca. 10 ml) is mixed with 2 mg of tin (IV) carrier and the pH is adjusted to 5.0 to collect the beryllium on tin (IV) hydroxide, leaving magnesium ions in the solution. The tin (IV) hydroxide is centrifuged, dissolved in 0.1 ml of 5 mol/l hydrobromic acid, and then diluted to 1 ml with water. Magnesium is so added as to be 500 g/ml for increasing the sensitivity about four times, and the beryllium in the solution is determined by graphite furnace atomic absorption spectrometry. The experiments with synthetic seawater samples showed that pg — g amounts of beryllium can be coprecipitated on the metal hydroxides and beryllium at the low ng/1 level can be determined with reasonable precision (RSD < 10%). The detection limit of the proposed method is 0.5 ng/l of beryllium in seawater.     

Drying dissipative patterns of colloidal crystals of silica spheres in organic solvents

Drying dissipative structural patterns formed in the course of drying colloidal crystals of silica spheres (110 nm in diameter) in water, methyl alcohol, ethyl alcohol, 1-propyl alcohol, diethyl ether, and in the mixtures of ethyl alcohol with the other solvents above have been studied on a cover glass. The macroscopic broad rings were formed in the outside edges of the dried film for all the solvents examined. Furthermore, much distinct broad rings appeared in the inner area when the solvents were ethyl alcohol, methyl alcohol, and their mixtures. Profiles of the thickness of the dried films were sensitive to the organic solvents and explained well with changes in the surface tensions, boiling points, and viscosities of the solvents. The macroscopic and microscopic spoke-like crack patterns formed. The drying area (or the drying time) increased (or decreased) as the surface tension of the solvent decreased. However, the absolute values of these drying parameters are determined also by the boiling points of the solvents. Importance of the fundamental properties of the solvents is supported in addition to the characteristics of colloidal particles in the drying dissipative pattern formation.     

Possible conformations and relative stability of the 7-membered ring in 1α,5β,6,7α(H)-and 1β,5α,6,7α(H)-guai-11(13)-en-6,12-olides

Stereoisomers of 1,5,6,7(H)- and 1,5,6,7(H)-guai-11(13)-en-6,12-olides are calculated using molecular mechanics. The possibility of forming various conformations in the 7-membered ring is examined as a function of the fusion to the 5-membered C-ring. The effect of the methyl orientation on the conformation of the 7-membered ring and the relative stability of the conformers are discussed.Insitute of Phytochemistry, Karaganda, fax (3212)-43-37-73. Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 54–56, January–February, 2000.     

2,4-二氧代-1,3,2-苯并二氮磷杂环己烷与■C=C■及CS_2加成反应的研究

本文研究了2,4-二氧代-1,3,2-苯并二氮磷杂环己烷的磷氢键对β-硝基苯乙烯、丙烯酸酯、丙烯腈及二硫化碳的加成反应,共合成了18个新的加成产物.发现通过选用不同的碱或控制碱的用量.可选择性的进行加成或开环反应.由X衍射证实:在加成产物的结构中,环外P-C键构象因受磷杂环船式构象影响,以邻位交叉式(A)为主.     

Analysis of the Association Process Between a Series of Phenol Derivatives with Two Novel Fluorinated Stationary Phase Using the Cl− Anion as Retention Marker

Summary Lithium chloride (LiCl) effect on the retention process of a phenol derivative series was investigated on two types of fluorinated stationary phase (i.e. a silica grafted with fluorinated linear alkyl chain (L-FSP) and a silica grafted with fluorinated aromatic ring stationary phase (A-FSP)). The results showed that the solute retention is enhanced when the A-FSP was used instead of the L-FSP due to additional – interactions. For the two fluorinated stationary phases (FSPs), the phenol-FSP association process can be divided into two LiCl concentration domains demonstrated that it was important to take into account the adsorbtion of Cl^– anion on the FSPs. As well, enthalpy-entropy compensation revealed that the solute retention mechanism was independent of the solute molecular structure and confirmed a change on the solute retention mechanism at a critical LiCl concentration value around 0.02M.     

On the Rigidity of Polynorbornenes with Dipolar Pendant Groups

A range of polynorbornenes (PNBs) with fused dipolar pendant groups at C‐5,6 positions was synthesized by ring‐opening metathesis polymerization catalyzed by a ruthenium carbene complex (Grubbs I). Photophysical studies, EFISH measurements, and atomic force microscopy images have been used to investigate the structures and morphology of these polymers. These results suggest that the polymers may adopt rigid rod‐like structures. The presence of the double bonds in PNBs appeared to be indispensable for the rigidity of the polymers. Interaction between unsaturated pendant groups may result in coherent alignment leading to a rod‐like structure.