光束偏转法自动测试激光等离子体冲击波系统的研制

根据光束偏转原理，研制了激光等离子体冲击波自动测试系统的硬件和软件。该系统使用计算机与可编程序控制器作为上下位机，采取上下位机通讯的方式控制步进电机及二维移动架的移动，以改变探测光的相对位置，并利用单模光纤和光电倍增管将探测到的光偏转信号传入数字示波器进行存储，最后计算机将示波器中采集到的光偏转信号进行分析处理。使用该系统对激光等离子冲击波的衰减过程进行了实际测试，得到了较为理想的实验结果。     

Technique for Monolithic Fabrication of Microlens Arrays Integrated with Infrared CCD

Based on scalar diffraction theory, 8-phase-level 256×256 elements diffractive microlens array with element dimension of 50×33 μm2 have been fabricated on the back-side of PtSi(3～5 μm) infrared CCD. The measurement results indicated that the ratio of the signal-to-noise of the infrared CCD with microlens was increased by a factor of 2.8.     

离轴球形粒子对高斯波束的散射光通量的计算

利用矢量球谐函数展开的方法,研究了离轴球形粒子对椭圆高斯波束的散射。根据其远区散射场的形式,得出了归一化散射场的斯托克斯参量(散射强度)与颗粒直径、折射率以及散射角的关系。建立了计算离轴球形粒子对高斯波束散射通量的解析模型,计算了散射光在任意散射方向上的光通量,得到了前向任意立体角内散射通量的计算公式,为激光散射探测提供了理论依据。     

Epitaxy: the motion picture

The engineering of many modern electronic devices demands control over a crystal down to the thickness of a single layer of atoms—and future demands will be even more challenging. Such control is achieved by the method of crystal growth known as epitaxy, and that makes this method the subject of intense study. More than that, recent advances are revolutionizing our knowledge of how surfaces grow. In fact, growing surfaces show a beautifully rich variety of phenomena, many of which are only now beginning to be uncovered. In the past few years many surface imaging techniques have been used to give us a close look at how crystals grow—while they are growing. The purpose of this article will be to illustrate some of the ways real surfaces grow and change as revealed by some of the latest in situ microscopic imaging technologies.

It is often said that crystal growth is more of an art than a science. Here we will show that it is emphatically both.     

电子直线加速器束流均方根发射度变化方程

本文导出了考虑外场和束流效应后束流均方根发射度平方变化方程的一般表达式,并就仅考虑外场,仅考虑空间电荷场和仅考虑尾场等三种特殊情况进行了分析。     

A high-current electron beam ion trap as an on-line charge breeder for the high precision mass measurement TITAN experiment

The precision of atomic mass measurements in a Penning trap is directly proportional to the charge state q of the ion and, hence, can be increased by using highly charged ions (HCI). For this reason, charge breeding with an electron beam ion trap (EBIT) is employed at TRIUMF’s Ion Trap for Atomic and Nuclear science (TITAN) on-line facility in Vancouver, Canada. By bombarding the injected and trapped singly charged ions with an intense beam of electrons, the charge state of the ions is rapidly increased inside the EBIT. To be compatible with the on-line requirements of short-lived isotopes, very high electron beam current densities are needed. The TITAN EBIT includes a 6 Tesla superconducting magnet and is designed to have electron beam currents and energies of up to 5 A and 60 keV, respectively. Once operational at full capacity, most species can be bred into a He-like configuration within tens of ms. Subsequently, the HCI are extracted, pass a Wien filter to reduce isobaric contamination, are cooled, and injected into a precision Penning trap for mass measurement. We will present the first results and current status of the TITAN EBIT, which has recently been moved to TRIUMF after assembly and commissioning at the Max-Planck-Institute (MPI) for Nuclear Physics in Heidelberg, Germany.     

厄米-双曲余弦-高斯光束的瞄准稳定性

用失调叠加积分的方法 ,对厄米双曲余弦高斯光束的瞄准稳定性作了研究 ,得到了厄米双曲余弦高斯光束失调因子 ηm2 的精确解析公式和近似解析公式 ,并用数值计算了相对横向偏移和相对角向偏移对失调因子ηm2 的影响以及对精确解析公式和近似解析公式的适用范围作了分析和说明。     

离子束引起的在Al／Cr双层薄膜界面处的原子混合

用600keV的Kr~ 离子轰击Al/Cr双层薄膜样品进行界面原子反应及相互混合的研究。实验样品是在单晶硅上蒸镀约500nm厚的铝膜,相继再蒸上所需厚度的铬膜而制成的。轰击剂量为2.0×10~(15)-2.5×10~(16)Kr~ /cm~2。用2.0MeVa粒子对轰击前后的样品进行了卢瑟福背散射(RBS)分析,发现界面处有明显的原子混合存在;当轰击剂量≥1.0×10~(16)Kr~ /cm~2时,RBS谱出现有明显的坪台,经拟合计算和x射线衍射(XRD)测量证实确有化合物Al_(13)Cr_2存在;还分别得到了原子混合量及混合效率与轰击剂量的关系;最后对界面处的原子混合机制进行了讨论。     

A generalized Adadorov theory for anisotropic thin-walled beams

This paper presents a generalized Adadorov theory for anisotropic thin—walled beams. The theory takes account of the shear strain of the middle surface, which exerts a significant influence on the anisotropic thin-walled beams. A new approach is established to solve the governing equations, which have the same form for both open and closed section beams. The numerical examples show that the effects of the shear strain cannot be neglected for this class of beams.This work was part of research project supported by the National Natural Science Foundation of China     

振动系统的模态分析实验设计

利用模态分析原理和简单试验仪器，得到了直观的悬臂梁和圆盘前4阶模态振型，使学生熟悉了模态分析原理和测试方法，有利于学生对振动规律的理解．