钢轴心受压构件截面的直接计算法

根据钢结构设计原理，依据现行国家标准《钢结构设计规范》（ＧＢＪ１７ ８８），通过计算构件合适长细比λ，直接进行钢轴心受压构件截面尺寸设计．     

DYNAMIC STABILITY OF AXIALLY MOVING VISCOELASTIC BEAMS WITH PULSATING SPEED

IntroductionThe class of systems with axially moving materials involves power transmission chains,band saw blades and paper sheets during processing. Vibration of such systems is generallyundesirable. The traveling tensioned Euler-Bernoulli beam is the pr…     

轴心受压H型截面钢柱火灾行为的试验研究

本文对4根H型截面钢柱进行了火灾行为的试验研究。全部火灾试验采用自行研制的火灾试验炉,试验结果表明炉子性能稳定,使用方便。试验采用足尺试验形式,柱长3300mm。钢柱轴心受压,其中两个限制轴向变形,另两个不限制轴向变形。柱两端采用单向刀口支座,允许钢柱绕强轴转动。钢柱试验中考虑荷载大小和是否限制轴向变形两个因素。通过试验,得出了钢柱在火灾下的侧向变形和轴向变形随温度变化情况。试验证明:钢柱受火时,轴向变形明显的分为膨胀阶段和压缩阶段。压缩阶段很短,一旦进入压缩阶段,钢柱很快破坏。钢柱受到的外加荷载越大,其极限温度越低。限制轴向变形的钢柱极限温度降低。试验研究为今后钢结构火灾行为研究提供了依据。     

轴向移动系统的参数振动问题研究进展

对近二十年来轴向移动系统(移动弦，移动梁和移动带等)的参数振动研究进展进行了详细的评述，特别关注了轴向张紧力和移动速度随时间改变时轴向移动系统的参数振动特性和稳定性等问题。文章首先讨论了所研究问题的控制方程。然后详细说明了目前研究中人们较为关注的几个重点问题，如参数激励的形式，求解方法和所研究的问题等。接着在其后的两节中，分别评述了在张紧力和移动速度随时间变化时，轴向移动弦和轴向移动梁的振动问题近年来的研究进展，详细、深入讨论了模型的类型、张紧力和轴向移动速度随时间变化的形式以及在研究中使用的解题方法和系统的振动特性(振动响应、固有频率和动态稳定性)等；最后给出了在此领域今后研究中应关注的问题。     

Nonexistence of Smooth Axially Symmetric Harmonic Maps from B^3 into S^2

Inspired by the construction of blow-up solutions of the heat flow of harmonic maps from D^2 into S^2 via maximum principle （Chang et al., J. Diff. Geom., 36, 1992, pp. 507-515.） we provide examples of nonexistence of smooth axially symmetric harmonic maps from B^3 into S^2 with smooth boundary maps of degree zero.     

Determination of nanostructure of liposomes containing two model drugs by X‐ray scattering from a synchrotron source

Small‐angle X‐ray scattering has been employed to study how the introduction of paracetamol and acetylsalicylic acid into a liposome bilayer system affects the system's nanostructure. An X‐ray scattering model, developed for multilamellar liposome systems [Pabst et al. (2000), Phys. Rev. E, 62 , 4000–4009], has been used to fit the experimental data and to extract information on how structural parameters, such as the number and thickness of the bilayers of the liposomes, thickness of the water layer in between the bilayers, size and volume of the head and tail groups, are affected by the drugs and their concentration. Even though the experimental data reveal a complicated picture of the drug–bilayer interaction, they clearly show a correlation between nanostructure, drug and concentration in some aspects. The localization of the drugs in the bilayers is discussed.     

On the boundary value problem for the spectrally loaded heat conduction operator

We consider the boundary value problems in a quarter-plane for a loaded heat conduction operator (one-dimensional in the space variable). A peculiarity of the operator in question is as follows: first, the spectral parameter is the coefficient of the loaded summand; second, the order of the derivative in the loaded summand is equal to that of the differential part of the operator, and third, the load point moves with a variable velocity. We demonstrate that the boundary value problem under study is Noetherian.     

Electronical tunable millimeterwave oscillators in slotline technique

A new electronical tuning process is proposed for a millimeterwave oscillator in slotline-technique. The circuit used for the GaAs-FET oscillator is realized by a slotline coupler-structure in which the feedback between the resonator and the transistor drain is made by help of electromagnetical field.     

轴对称介质中光子的运动及其受激发射

采用光学度规模型，研究了光子在轴以称介质中的运动轨道，分析了光子在不稳定轨道附近的行为，进而讨论了经在激活介质中的受激发射。