Numerical analysis of finite amplitude motion of waves and a moored floating body under severe storm conditions

The motion of a moored floating body under the action of wave forces, which is influenced by fluid forces, shape of the floating body and mooring forces, should be analysed as a complex coupled motion system. Especially under severe storm conditions or resonant motion of the floating body it is necessary to consider finite amplitude motions of the waves, the floating body and the mooring lines as well as non-linear interactions of these finite amplitude motions. The problem of a floating body has been studied on the basis of linear wave theory by many researchers. However, the finite amplitude motion under a correlated motion system has rarely been taken into account. This paper presents a numerical method for calculating the finite amplitude motion when a floating body is moored by non-linear mooring lines such as chains and cables under severe storm conditions.     

Passive control of the flow around a square cylinder using porous media

The passive control of bluff body flows using porous media is investigated by means of the penalization method. This method is used to create intermediate porous media between solid obstacles and the fluid in order to modify the boundary layer behaviour. The study covers a wide range of two‐dimensional flows from low transitional flow to fully established turbulence by direct numerical simulation of incompressible Navier–Stokes equations. A parametric study is performed to illustrate the effect of the porous layer permeability and thickness on the passive control. The numerical results reveal the ability of porous media to both regularize the flow and to reduce the drag forces up to 30%. Copyright © 2004 John Wiley & Sons, Ltd.     

A variational coupled cluster theory for closed shells using a propagator modification procedure

A general partial summation method for including arbitrary classes of diagrams to all orders in the coupled cluster based size consistent energy functional for closed shell states is developed. Since the various reduced density matrices which appear in the energy functional are essentially the time-independent analogues of the corresponding many body Green functions, it is possible to derive Dyson-like equations for these quantities. By expanding the associated proper self energy parts in terms of the T-amplitudes, one can carry out partial summations in the reduced density matrices and thus in energy. At a higher level, higher order terms in a proper self energy can also be generated by renormalizing the internal propagators in it, and considering only the irreducible self-energy terms.     

Application of coset representations to the construction of symmetry adapted functions

Summary A coset representation (G(/G _i )), which is defined algebraically by a coset decomposition of a finite groupG by its subgroupG _i , is shown to be a method for the decomposition of a regular body into its point group orbits. This proof also shows that each member of theG(/G _i ) orbit belongs to theG _i site-symmetry. In addition, a general equation concerning the multiplicities of such coset representations is derived and shown to involve Brester's equations and thek-value equations of framework groups as special cases. The relationship of the coset representation and the site-symmetry affords a general procedure for obtaining symmetry adapted functions.     

A Hybrid Data-Differencing and Compression Algorithm for the Automotive Industry

We propose an innovative delta-differencing algorithm that combines software-updating methods with LZ77 data compression. This software-updating method relates to server-side software that creates binary delta files and to client-side software that performs software-update installations. The proposed algorithm creates binary-differencing streams already compressed from an initial phase. We present a software-updating method suitable for OTA software updates and the method’s basic strategies to achieve a better performance in terms of speed, compression ratio or a combination of both. A comparison with publicly available solutions is provided. Our test results show our method, Keops, can outperform an LZMA (Lempel–Ziv–Markov chain-algorithm) based binary differencing solution in terms of compression ratio in two cases by more than 3% while being two to five times faster in decompression. We also prove experimentally that the difference between Keops and other competing delta-creator software increases when larger history buffers are used. In one case, we achieve a three times better performance for a delta rate compared to other competing delta rates.     

In Vitro and In Vivo Human Body Odor Analysis Method Using GO:PANI/ZNRs/ZIF−8 Adsorbent Followed by GC/MS

Among various volatile organic compounds (VOCs) emitted from human skin, trans-2-nonenal, benzothiazole, hexyl salicylate, α-hexyl cinnamaldehyde, and isopropyl palmitate are key indicators associated with the degrees of aging. In our study, extraction and determination methods of human body odor are newly developed using headspace-in needle microextraction (HS-INME). The adsorbent was synthesized with graphene oxide:polyaniline/zinc nanorods/zeolitic imidazolate framework-8 (GO:PANI/ZNRs/ZIF−8). Then, a wire coated with the adsorbent was placed into the adsorption kit to be directly exposed to human skin as in vivo sampling and inserted into the needle so that it was able to be desorbed at the GC injector. The adsorption kit was made in-house with a 3D printer. For the in vitro method, the wire coated with the adsorbent was inserted into the needle and exposed to the headspace of the vial. When a cotton T-shirt containing body odor was transferred to a vial, the headspace of the vial was saturated with body odor VOCs. After volatile organic compounds were adsorbed in the dynamic mode, the needle was transferred to the injector for analysis of the volatile organic compounds by gas chromatography/mass spectrometry (GC/MS). The conditions of adsorbent fabrication and extraction for body odor compounds were optimized by response surface methodology (RSM). In conclusion, it was able to synthesize GO:PANI/ZNRs/ZIF−8 at the optimal condition and applicable to both in vivo and in vitro methods for body odor VOCs analysis.     

闭壳层原子相关效应的多体理论计算：Ne原子基态相关能

对coupled-pair many-electron theory(CPMET)展开中的非线性四体效应采取了近似处理,用角动量图技术和两体函数方法得到了适用于一般闭壳层原子的径向微分方程。然后以X_a模型作为零级近似,通过迭代求解成功地计算了Ne原子基态的任意阶相相关能,从而说明至少对于闭壳层原子体系而言,用X_a模型作零级近似同样可以进行成功的多体理论计算。     

在气轨上有关变质量规律的实验研究

本文介绍一种新型的变质量实验装置，借助气垫导轨可验证变质量下的动量定理和运动方程等规律。     

截面体与凸体的包含测度

本文建立了E^n中的凸体与其位似体的包含测度的相等关系，同时给出了凸体Minkowski和的包含测度的估计。最后证明了E^3中的关于原点对称的旋转椭球与其截面体相似的充要条件是K为以原点为心的球。     

Many body effects in the electronic and optical properties of the (1 1 1) surface of diamond

The (1 1 1) face is the cleavage surface of diamond. Understanding its properties is very important for the growing technological interest on the chemistry of diamond surfaces. Within DFT the most stable reconstruction is the Pandey chain model, the atoms on the chain being neither buckled nor dimerised. However this geometry gives rise to a semi metallic band structure in contrast with experimental findings that show the presence of a gap ranging from 0.5 to 2 eV. Here we show that the same equilibrium geometry and thus the same metallic band structure is found relaxing the surface using screened exchange (sX) or Hartree-Fock (HF) functionals. We will discuss in detail how breaking the equivalence of the atoms on the chain affects the band structure and we will show that a buckling would yield a semiconducting surface, but is energetically unfavorable. A semiconducting character can be restored, within the equilibrium geometry, if quasiparticle corrections are carefully included within an iterative GW scheme. The result of the theoretical reflectance anisotropy spectra (RAS) at a DFT-RPA level are also presented and discussed. As expected, a strong anisotropy signal is found at low energies due to transitions between surface states inside the fundamental gap.