用动态光弹性法研究炮身膛线的脱落问题

本文利用动态光弹性法研究了炮膛膛线脱落的机理。用包含五条膛线的部分炮筒横截面或扇形平面模型,在六种不同的载荷状态下进行了实验。得到了不同载荷状态下,不同瞬时的等差线条纹图的系列照片,以及膛线根部不同瞬时的应力分布曲线。结果表明:当一条或相邻数条膛线顶端受到足够大的均布冲击载荷时,将在承载膛线两侧根部的应力极值点出现膛线脱落的起裂点,而形成八字形脱落;而对非均布的其它几种冲击载荷,膛线都不会出现八字形脱落。     

钨合金柱形弹超高速撞击水泥砂浆靶的侵彻深度研究

为探索钨合金柱形弹超高速撞击水泥砂浆靶的侵彻深度随撞击速度变化规律,利用二级轻气炮开展了?3.45 mm×10.5 mm的克级93 W钨合金柱形弹以1.82~3.66 km/s的速度撞击水泥砂浆靶的实验,利用CT图像诊断技术获得了侵彻深度和残余弹长随撞击速度的变化规律,对超高速撞击过程进行了数值模拟,结合数值模拟结果进一步分析了超高速撞击物理过程。结果表明:(1)超高速撞击条件下成坑是弹坑+弹洞型;(2)侵深-速度曲线呈现先增大后减小的现象,在弹速2.6 km/s附近存在侵彻深度极大值,约为8.5倍弹长,相对于中低速侵彻的深度并没有显著优势。(3)通过基于数值模拟得到的弹靶界面压力时程曲线将侵彻过程分为4个阶段,其中准定常侵彻阶段和第三侵彻阶段是决定总侵深的主要阶段。(4)随撞击速度增加,弹体侵蚀逐渐剧烈,此时准定常侵彻阶段的侵深变化不大,而第三侵彻阶段中的刚体侵彻部分大幅降低,导致总侵深大幅降低,使总侵深曲线呈现先增大后减小的现象。     

平衡炮实验弹丸膛内过载计算模型及应用

 针对平衡炮的具体结构特点,为了精确计算弹丸膛内过载变化过程,利用经典内弹道法对某口径的平衡炮进行了仿真计算,得出了内弹道诸元随时间的变化曲线,再根据膛压与过载的关系,推导出了过载随时间变化的曲线图,理论计算与实验结果相吻合,该计算方法可为此类火炮的内弹道参数评估和弹丸设计提供依据。     

8 mm二次谐波回旋速调管放大器双阳极磁控注入电子枪的设计

 计算了8 mm二次谐波回旋速调管双阳极电子枪的设计参数，根据这些参数，采用EGUN软件进行模拟和优化，设计出了一只双阳极磁控注入电子枪，该枪的电子束纵横速度比为1.45，速度零散为5.4%，并讨论了电极形状、磁场分布、电流、控制极电压和第二阳极电压对电子注性能的影响，结果发现电子注对这些影响因子非常敏感，设计中应对它们进行充分优化。     

用于短波长FEL的光阴极微波电子枪设计研究

高增益、短波长自由电子激光器需要发射度低、峰值电流高的短脉冲电子束流.采用发射度补偿技术,设计了一台S波段、一个半腔体的光阴极微波电子枪以用于建议中的SDUV-FEL装置.POISSON,SUPERFISH和PARMELA程序的计算表明:当微脉冲电量为2nC时,这种设计能产生ε_n,rms=2.3π·mm·mrad、E_k=4.8MeV的电子束流.报道了该枪的设计考虑和模拟结果.     

标准镜的高精度柔性支撑镜框的优化设计

为了实现干涉仪标准镜中光学元件的高精度定位,设计了一种柔性支撑镜框,研究了该结构的力学模型、结构参数、定位精度和透镜变形。首先,根据材料力学原理将柔性镜框等效为一个弹簧系统;根据力学方程和几何关系,建立了透镜中心位置与柔性结构的挠度之间的二元方程。然后,分析了安装位置、温度、结构参数对透镜位置以及作用力的影响。最后,应用有限元仿真分析了所设计结构的力学性能,并进行对比验证。结果表明,数值仿真分析的结果与有限元仿真结果基本相同,柔性镜框的柔性结构厚度最优值为1.5 mm。该设计方案完全满足干涉仪标准镜对镜框在定位精度、稳定性方面的要求。     

Bunch length measurement at Tsinghua Thomson scattering X-ray source

The length of electron beam from a photocathode RF gun is determined by a spectrometer, according to the relative energy spread induced by the bunch length during the acceleration in a linac. For a photocathode RF gun, different laser injected phase and beam charge are studied. The compression is changed for the different laser phases, as from 10° to 30°, and the bunch length is lengthened due to the strong longitudinal space charge force, caused by the increased charge.     

标准镜的高精度柔性支撑镜框的优化设计

为了实现干涉仪标准镜中光学元件的高精度定位,设计了一种柔性支撑镜框,研究了该结构的力学模型、结构参数、定位精度和透镜变形。首先,根据材料力学原理将柔性镜框等效为一个弹簧系统;根据力学方程和几何关系,建立了透镜中心位置与柔性结构的挠度之间的二元方程。然后,分析了安装位置、温度、结构参数对透镜位置以及作用力的影响。最后,应...     

Emittance measurement & optimization for the photocathode RF gun with laser profile shaping

The Laser Undulator Compact X-ray source(LUCX) is a test bench for a compact high brightness X-ray generator,based on inverse Compton Scattering at KEK,which requires high intensity multi-bunch trains with low transverse emittance.A photocathode RF gun with emittance compensation solenoid is used as an electron source.Much endeavor has been made to increase the beam intensity in the multi-bunch trains.The cavity of the RF gun is tuned into an unbalanced field in order to reduce space charge effects,so that the field gradient on the cathode surface is relatively higher when the forward RF power into gun cavity is not high enough.A laser profile shaper is employed to convert the driving laser profile from Gaussian into uniform.In this research we seek to find the optimized operational conditions for the decrease of the transverse emittance.With the uniform driving laser and the unbalanced RF gun,the RMS transverse emittance of a 1 nC bunch has been improved effectively from 5.46 πmm.mrad to 3.66 πmm.mrad.     

First experimental research of the bunch compressor at CAEPLI

Magnetic bunch compressor is one of the key technologies on the path to next generation accelerator driven facilities. In this paper we report the design principles and the first experimental research of the bunch compressor developed at Chinese Academy of Engineering Physics (CAEP). The length of the bunch after compressor is found to be about 0.7 ps (rms) and the peak current exceeds 500 A when operated in the optimized condition. The sensitivity of the bunch length on the phase of the acceleration field and magnetic field of the bunch compressor was also measured and analyzed.