ELECTRON GUN FOR LARGE ORBIT GYROTRON (LOG) WITH DECREASED INFLUENCE OF CATHODE PLASMA ON ELECTRON BEAM PROPERTIES

High power Large Orbit Gyrotron (LOG) [1] is now under development at FIR FU. First version of this device was recently manufactured and then assembled with power supply ETIGO-IV [2]. Results of preliminary tests of electron-optic system are presented. The conditions when stableflat form of current pulse realized are discussed. Analytical estimations of cathode-anode distance to achieve small influence of cathode plasma during high voltage (HV) pulse are performed. Two new electron gun versions with decreased influence of the cathode plasma on its impedance and pulse form are suggested and optimized. New optimal magnetic field distributions are found. First gun has quiasi-flat cathode configuration near the anode diaphragm and provides operating current about 60 A. Second one uses blade cathode with operating current about 30 A. Beam quality for both guns is suitable for LOG operation.     

Time domain identification and ranking of noise sources in a pneumatic nail gun

This paper investigates the noise sources in a pneumatic nail gun. The study combines two complementary experimental approaches. The first uses simultaneous data observation, with sound, acceleration and air pressure signals simultaneously recorded in conjunction with a nail gun motion high speed video. This strategy allows the identification of the physical processes involved in the operation of the machine at different time instants, as well as the associated noise generation mechanisms. However, since multiple noise sources radiate at the same time, this observation technique is not sufficient for noise source identification and ranking. Thus, a second approach introduces a selective wrapping procedure, and the strategy assures a reliable classification of the noise sources. The investigation considers the following noise origins: the air exhaust, the machine body and the workpiece/worktable.     

Dynamics of plasma channel in a parallel-plate plasma gun

Lumped parameter models for describing dynamics of the plasma channel in a parallel-plate plasma gun are compared with the experimental results obtained from two plasma guns with different rail geometries. Comparison between the experiments and the numerical calculations reveals that the lumped parameter models can be utilized to describe the dynamic motion of the plasma channel quite well. Parametric study shows that minimizing the line inductance and increasing the charging voltage on a capacitor as well as minimizing the gas injection time for reducing the mass of the plasma channel are the key factors to increase the flow velocity of the plasma jet ejected from the plasma gun.     

平衡炮实验弹丸膛内过载计算模型及应用

 针对平衡炮的具体结构特点,为了精确计算弹丸膛内过载变化过程,利用经典内弹道法对某口径的平衡炮进行了仿真计算,得出了内弹道诸元随时间的变化曲线,再根据膛压与过载的关系,推导出了过载随时间变化的曲线图,理论计算与实验结果相吻合,该计算方法可为此类火炮的内弹道参数评估和弹丸设计提供依据。     

感应耦合等离子体中和枪的电子引出特性研究

给出了一种感应耦合等离子体源的设计,用于等离子体中和枪装置.通过实验方法研究等离子体源的电子引出特性,并结合理论分析了等离子体密度随射频功率的变化关系.研究结果表明等离子体源的电子引出特性与放电腔内气压有关联性,E?H模式转换中电子密度的变化与负载的电感值相关.研究成果对等离子体中和枪的发展有重要的参考价值.     

钨合金柱形弹超高速撞击水泥砂浆靶的侵彻深度研究

为探索钨合金柱形弹超高速撞击水泥砂浆靶的侵彻深度随撞击速度变化规律,利用二级轻气炮开展了?3.45 mm×10.5 mm的克级93 W钨合金柱形弹以1.82~3.66 km/s的速度撞击水泥砂浆靶的实验,利用CT图像诊断技术获得了侵彻深度和残余弹长随撞击速度的变化规律,对超高速撞击过程进行了数值模拟,结合数值模拟结果进一步分析了超高速撞击物理过程。结果表明:(1)超高速撞击条件下成坑是弹坑+弹洞型;(2)侵深-速度曲线呈现先增大后减小的现象,在弹速2.6 km/s附近存在侵彻深度极大值,约为8.5倍弹长,相对于中低速侵彻的深度并没有显著优势。(3)通过基于数值模拟得到的弹靶界面压力时程曲线将侵彻过程分为4个阶段,其中准定常侵彻阶段和第三侵彻阶段是决定总侵深的主要阶段。(4)随撞击速度增加,弹体侵蚀逐渐剧烈,此时准定常侵彻阶段的侵深变化不大,而第三侵彻阶段中的刚体侵彻部分大幅降低,导致总侵深大幅降低,使总侵深曲线呈现先增大后减小的现象。     

用动态光弹性法研究炮身膛线的脱落问题

本文利用动态光弹性法研究了炮膛膛线脱落的机理。用包含五条膛线的部分炮筒横截面或扇形平面模型,在六种不同的载荷状态下进行了实验。得到了不同载荷状态下,不同瞬时的等差线条纹图的系列照片,以及膛线根部不同瞬时的应力分布曲线。结果表明:当一条或相邻数条膛线顶端受到足够大的均布冲击载荷时,将在承载膛线两侧根部的应力极值点出现膛线脱落的起裂点,而形成八字形脱落;而对非均布的其它几种冲击载荷,膛线都不会出现八字形脱落。     

作为BEPCII预注入器的光阴极注入器

 为了提高并且采用双束加速技术以进一步提高BEPCII正电子从直线加速器注入到储存环的速率,BEPCII(Beijing Electron Positron Collider Upgrade Project) 正在建造带有两个次谐波聚束腔的新预注入器。提出了使用光阴极注入器作为BEPCII预注入器的新方案,其性能优于次谐波聚束系统：发射度和能散至多为次谐波聚束系统的1/4,100%的传输效率,没有卫星束团的干扰,等。此外,还分别对光阴极注入器在高电荷量和低电荷量两种情况下的束流动力学进行了模拟计算和优化研究,并将其性能与正在建造的次谐波聚束系统和旧聚束系统的性能进行了比较和讨论。由此光阴极注入器产生的电子束还可以在将来用作激光-等离子体或激光-非传导性加速结构的尾场加速研究。     

用5种不同的电子光学软件对微波管电子枪进行模拟计算

 对TWTCAD微机版、工作站版本、EGUN，CAMEO以及Orprogr电子光学软件背景和特点作了一个简单介绍，并利用其模拟计算了11支不同结构的电子枪。将计算得到的导流系数、射程和注腰半径与实验数据列表对比，结果表明：不同电子光学软件计算不同类型电子枪其计算精度也不一样。在导流系数方面，EGUN和Orprogr的计算精度较高，绝对平均误差分别为7.18%和7.4%；在射程方面，TWTCAD的计算精度最高，绝对平均误差为5.69%；在注腰半径方面，Orprogr与实验值偏差较大，绝对平均误差为47.43%，而工作站版本的计算精度最高，绝对误差仅为2.29%。     

电子束蒸发沉积Ir膜真空紫外反射特性

Ir是一种重要的真空紫外反射材料,在太阳物理、宇宙物理、生命科学、大气物理、同步辐射等方面有着十分重要的应用.对电子束蒸发沉积Ir膜在真空紫外波段的反射特性进行了系统的理论和实验研究.根据吸收材料基底上单层金属膜数学计算模型,对不同基片上各种厚度的Ir膜真空紫外反射率进行了优化计算.根据计算和前期实验结果,采用电子束蒸发方法,在石英、K9玻璃基片上沉积了不同厚度的Ir膜,在入射波长120 nm处获得了近30%正入射反射率,对应的Ir膜厚度为12 nm.过厚或过薄均不利于Ir膜反射率的提高.经退火处理后,Ir膜中张应力有所释放但并未消除,同时晶粒平均尺寸显著增大,反射率下降.